Change macro name to IRQ_ENABLED.
[bertos.git] / app / at91sam7s / at91sam7s.c
1 /**
2  * \file
3  * <!--
4  * This file is part of BeRTOS.
5  *
6  * Bertos is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
19  *
20  * As a special exception, you may use this file as part of a free software
21  * library without restriction.  Specifically, if other files instantiate
22  * templates or use macros or inline functions from this file, or you compile
23  * this file and link it with other files to produce an executable, this
24  * file does not by itself cause the resulting executable to be covered by
25  * the GNU General Public License.  This exception does not however
26  * invalidate any other reasons why the executable file might be covered by
27  * the GNU General Public License.
28  *
29  * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
30  *
31  * -->
32  *
33  * \version $Id$
34  *
35  * \author Francesco Sacchi <batt@develer.com>
36  *
37  * \brief AT91SAM7S-EK porting test.
38  */
39
40 #include <cfg/macros.h>
41 #include <drv/timer.h>
42 #include <drv/sysirq_at91.h>
43 #include <kern/proc.h>
44 #include <drv/ser.h>
45 #include <cfg/macros.h>
46 #include <io/arm.h>
47
48 static int iort = 23;
49 static int iort1 = 232;
50 static int iort2 = 233;
51
52 Timer leds_timer;
53
54 static void leds_toggle(void)
55 {
56         uint8_t a = (~PIOA_ODSR & 0x0f);
57
58         if (a)
59         {
60                 PIOA_SODR = a;
61                 PIOA_CODR = a << 1;
62         }
63         else
64         {
65                 PIOA_SODR  =  0x0f;
66                 /* turn first led on */
67                 PIOA_CODR  = 0x00000001;
68         }
69
70         /* Wait for interval time */
71         timer_setDelay(&leds_timer, ms_to_ticks(100));
72         timer_add(&leds_timer);
73 }
74
75
76 int main(void)
77 {
78         kdbg_init();
79         sysirq_init();
80         timer_init();
81
82         proc_init();
83         ASSERT(!IRQ_ENABLED());
84
85
86
87         /* Open the main communication port */
88         Serial *host_port = ser_open(0);
89         ser_setbaudrate(host_port, 115200);
90         ser_setparity(host_port, SER_PARITY_NONE);
91
92         IRQ_ENABLE;
93         ASSERT(IRQ_ENABLED());
94
95         /* Disable all pullups */
96         PIOA_PUDR = 0xffffffff;
97         /* Set PA0..3 connected to PIOA */
98         PIOA_PER  = 0x0000000f;
99         /* Set PA0..3 as output */
100         PIOA_OER  = 0x0000000f;
101         /* Disable multidrive on all pins */
102         PIOA_MDDR = 0x0000000f;
103
104         /* Set PA0..3 to 1 to turn off leds */
105         PIOA_SODR  = 0x0000000f;
106         /* turn first led on */
107         PIOA_CODR  = 0x00000001;
108
109         timer_set_event_softint(&leds_timer, (Hook)leds_toggle, 0);
110         timer_setDelay(&leds_timer, ms_to_ticks(100));
111         timer_add(&leds_timer);
112
113         // Main loop
114         for(;;)
115         {
116                 ser_printf(host_port," %s", "a");
117                 kprintf("W la figa!\n");
118                 proc_test();
119                 iort+= 1;
120                 iort1+= 1;
121                 iort2+= 1;
122         }
123
124         return 0;
125 }
126