4 * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
5 * This file is part of DevLib - See README.devlib for information.
8 * \brief DevLib configuration options
10 * You should copy this header in your project and rename it to
11 * "config.h" and delete the CONFIG_ macros for the modules
14 * <h2>Working with multiple applications</h2>
16 * If your project is made of multiple DevLib-based applications,
17 * create a custom "config.h" file in each application subdirectory
18 * and play with the compiler include path to get the desired result.
19 * You can share common options by creationg a "config_common.h" header
20 * and including it from all your "config.h" copies.
22 * <h2>Configuration style</h2>
24 * For improved compile-time checking of configuration options,
25 * the preferred way to use a \c CONFIG_ symbol is keeping it
26 * always defined with a value of either 0 or 1. This lets
27 * you write tests like this:
36 * #endif // CONFIG_FOO
39 * In most cases, we rely on the optimizer to discard checks
40 * on constant values and performing dead-code elimination.
43 * \author Bernardo Innocenti <bernie@develer.com>
44 * \author Stefano Fedrigo <aleph@develer.com>
49 *#* Revision 1.3 2006/06/12 21:37:01 marco
50 *#* implemented some commands (ver and sleep)
52 *#* Revision 1.2 2006/06/01 12:29:21 marco
53 *#* Add first simple protocol command (version request).
55 *#* Revision 1.1 2006/05/18 00:41:47 bernie
56 *#* New triface devlib application.
60 #ifndef APPCONFIG_TRIFACE_H
61 #define APPCONFIG_TRIFACE_H
63 /** Baud-rate for the kdebug console */
64 #define CONFIG_KDEBUG_BAUDRATE 38400
66 /** Serial port number for kdebug console */
67 #define CONFIG_KDEBUG_PORT 0
71 * printf()-style formatter configuration.
74 * \sa PRINTF_NOMODIFIERS
79 #define CONFIG_PRINTF PRINTF_FULL
82 * Multithreading kernel.
86 #define CONFIG_KERNEL 0
89 * \name Serial driver parameters
92 /** [bytes] Size of the outbound FIFO buffer for port 0. */
93 #define CONFIG_UART0_TXBUFSIZE 32
95 /** [bytes] Size of the inbound FIFO buffer for port 0. */
96 #define CONFIG_UART0_RXBUFSIZE 64
98 /** [bytes] Size of the outbound FIFO buffer for port 1. */
99 #define CONFIG_UART1_TXBUFSIZE 32
101 /** [bytes] Size of the inbound FIFO buffer for port 1. */
102 #define CONFIG_UART1_RXBUFSIZE 64
104 /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
105 #define CONFIG_SPI_TXBUFSIZE 16
107 /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
108 #define CONFIG_SPI_RXBUFSIZE 32
110 /** Default transmit timeout (ms). Set to -1 to disable timeout support */
111 #define CONFIG_SER_TXTIMEOUT -1
113 /** Default receive timeout (ms). Set to -1 to disable timeout support */
114 #define CONFIG_SER_RXTIMEOUT -1
116 /** Use RTS/CTS handshake */
117 #define CONFIG_SER_HWHANDSHAKE 0
119 /** Default baud rate (set to 0 to disable) */
120 #define CONFIG_SER_DEFBAUDRATE 0
122 /** Enable ser_gets() and ser_gets_echo() */
123 #define CONFIG_SER_GETS 1
125 /** Enable second serial port in emulator. */
126 #define CONFIG_EMUL_UART1 0
129 * Transmit always something on serial port 0 TX
130 * to avoid interference when sending burst of data,
131 * using AVR multiprocessor serial mode
133 #define CONFIG_SER_TXFILL 0
135 #define CONFIG_SER_STROBE 0
138 /// Hardware timer selection for drv/timer.c
139 #define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE0
141 /// Debug timer interrupt using a strobe pin.
142 #define CONFIG_TIMER_STROBE 0
144 /// Enable watchdog timer.
145 #define CONFIG_WATCHDOG 0
147 /// Enable internal parser commands.
148 #define CONFIG_INTERNAL_COMMANDS 0
150 #endif /* APPCONFIG_TRIFACE_H */