4 * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
5 * This file is part of DevLib - See README.devlib for information.
8 * \brief DevLib configuration options
10 * You should copy this header in your project and rename it to
11 * "config.h" and delete the CONFIG_ macros for the modules
14 * <h2>Working with multiple applications</h2>
16 * If your project is made of multiple DevLib-based applications,
17 * create a custom "config.h" file in each application subdirectory
18 * and play with the compiler include path to get the desired result.
19 * You can share common options by creationg a "config_common.h" header
20 * and including it from all your "config.h" copies.
22 * <h2>Configuration style</h2>
24 * For improved compile-time checking of configuration options,
25 * the preferred way to use a \c CONFIG_ symbol is keeping it
26 * always defined with a value of either 0 or 1. This lets
27 * you write tests like this:
36 * #endif // CONFIG_FOO
39 * In most cases, we rely on the optimizer to discard checks
40 * on constant values and performing dead-code elimination.
43 * \author Bernardo Innocenti <bernie@develer.com>
44 * \author Stefano Fedrigo <aleph@develer.com>
49 *#* Revision 1.2 2006/06/01 12:29:21 marco
50 *#* Add first simple protocol command (version request).
52 *#* Revision 1.1 2006/05/18 00:41:47 bernie
53 *#* New triface devlib application.
57 #ifndef APPCONFIG_TRIFACE_H
58 #define APPCONFIG_TRIFACE_H
60 /** Baud-rate for the kdebug console */
61 #define CONFIG_KDEBUG_BAUDRATE 38400
63 /** Serial port number for kdebug console */
64 #define CONFIG_KDEBUG_PORT 0
68 * printf()-style formatter configuration.
71 * \sa PRINTF_NOMODIFIERS
76 #define CONFIG_PRINTF PRINTF_FULL
79 * Multithreading kernel.
83 #define CONFIG_KERNEL 0
86 * \name Serial driver parameters
89 /** [bytes] Size of the outbound FIFO buffer for port 0. */
90 #define CONFIG_UART0_TXBUFSIZE 32
92 /** [bytes] Size of the inbound FIFO buffer for port 0. */
93 #define CONFIG_UART0_RXBUFSIZE 64
95 /** [bytes] Size of the outbound FIFO buffer for port 1. */
96 #define CONFIG_UART1_TXBUFSIZE 32
98 /** [bytes] Size of the inbound FIFO buffer for port 1. */
99 #define CONFIG_UART1_RXBUFSIZE 64
101 /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
102 #define CONFIG_SPI_TXBUFSIZE 16
104 /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
105 #define CONFIG_SPI_RXBUFSIZE 32
107 /** Default transmit timeout (ms). Set to -1 to disable timeout support */
108 #define CONFIG_SER_TXTIMEOUT -1
110 /** Default receive timeout (ms). Set to -1 to disable timeout support */
111 #define CONFIG_SER_RXTIMEOUT -1
113 /** Use RTS/CTS handshake */
114 #define CONFIG_SER_HWHANDSHAKE 0
116 /** Default baud rate (set to 0 to disable) */
117 #define CONFIG_SER_DEFBAUDRATE 0
119 /** Enable ser_gets() and ser_gets_echo() */
120 #define CONFIG_SER_GETS 1
122 /** Enable second serial port in emulator. */
123 #define CONFIG_EMUL_UART1 0
126 * Transmit always something on serial port 0 TX
127 * to avoid interference when sending burst of data,
128 * using AVR multiprocessor serial mode
130 #define CONFIG_SER_TXFILL 0
132 #define CONFIG_SER_STROBE 0
135 /// Hardware timer selection for drv/timer.c
136 #define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
138 /// Debug timer interrupt using a strobe pin.
139 #define CONFIG_TIMER_STROBE 0
141 /// Enable watchdog timer.
142 #define CONFIG_WATCHDOG 0
144 /// Enable internal parser commands.
145 #define CONFIG_INTERNAL_COMMANDS 0
147 #endif /* APPCONFIG_TRIFACE_H */