4 * This file is part of BeRTOS.
6 * Bertos is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 * As a special exception, you may use this file as part of a free software
21 * library without restriction. Specifically, if other files instantiate
22 * templates or use macros or inline functions from this file, or you compile
23 * this file and link it with other files to produce an executable, this
24 * file does not by itself cause the resulting executable to be covered by
25 * the GNU General Public License. This exception does not however
26 * invalidate any other reasons why the executable file might be covered by
27 * the GNU General Public License.
29 * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
30 * All Rights Reserved.
33 * \brief Configuration file for serial module.
37 * \author Daniele Basile <asterix@develer.com>
44 * Example of setting for serial port and
46 * Edit these define for your project.
49 /// [bytes] Size of the outbound FIFO buffer for port 0. $WIZ$ type = "int"
50 #define CONFIG_UART0_TXBUFSIZE 32
52 /// [bytes] Size of the inbound FIFO buffer for port 0. $WIZ$ type = "int"
53 #define CONFIG_UART0_RXBUFSIZE 32
55 /// [bytes] Size of the outbound FIFO buffer for port 1. $WIZ$ type = "int"
56 #define CONFIG_UART1_TXBUFSIZE 32
58 /// [bytes] Size of the inbound FIFO buffer for port 1. $WIZ$ type = "int"
59 #define CONFIG_UART1_RXBUFSIZE 32
63 * [bytes] Size of the outbound FIFO buffer for SPI port.
65 * $WIZ$ supports = "avr"
67 #define CONFIG_SPI_TXBUFSIZE 32
70 * [bytes] Size of the inbound FIFO buffer for SPI port.
72 * $WIZ$ supports = "avr"
74 #define CONFIG_SPI_RXBUFSIZE 32
76 /// [bytes] Size of the outbound FIFO buffer for SPI port 0. $WIZ$ type = "int"
77 #define CONFIG_SPI0_TXBUFSIZE 32
79 /// [bytes] Size of the inbound FIFO buffer for SPI port 0. $WIZ$ type = "int"
80 #define CONFIG_SPI0_RXBUFSIZE 32
82 /// [bytes] Size of the outbound FIFO buffer for SPI port 1. $WIZ$ type = "int"
83 #define CONFIG_SPI1_TXBUFSIZE 32
85 /// [bytes] Size of the inbound FIFO buffer for SPI port 1. $WIZ$ type = "int"
86 #define CONFIG_SPI1_RXBUFSIZE 32
92 * $WIZ$ value_list = "ser_order_bit"
93 * $WIZ$ supports = "avr"
95 #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
98 * SPI clock division factor.
100 * $WIZ$ supports = "avr"
102 #define CONFIG_SPI_CLOCK_DIV 16
105 * SPI clock polarity: normal low or normal high.
106 * $WIZ$ type = "enum"
107 * $WIZ$ value_list = "ser_spi_pol"
108 * $WIZ$ supports = "avr"
110 #define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
113 * SPI clock phase you can choose sample on first edge or
114 * sample on second clock edge.
115 * $WIZ$ type = "enum"
116 * $WIZ$ value_list = "ser_spi_phase"
117 * $WIZ$ supports = "avr"
119 #define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
121 /// Default transmit timeout (ms). Set to -1 to disable timeout support. $WIZ$ type = "int"
122 #define CONFIG_SER_TXTIMEOUT -1
124 /// Default receive timeout (ms). Set to -1 to disable timeout support. $WIZ$ type = "int"
125 #define CONFIG_SER_RXTIMEOUT -1
127 /// Use RTS/CTS handshake. $WIZ$ type = "boolean"
128 #define CONFIG_SER_HWHANDSHAKE 0
130 /// Default baud rate (set to 0 to disable). $WIZ$ type = "boolean"
131 #define CONFIG_SER_DEFBAUDRATE 0
133 /// Enable ser_gets() and ser_gets_echo(). $WIZ$ type = "boolean"
134 #define CONFIG_SER_GETS 0
136 /// Enable second serial port in emulator. $WIZ$ type = "boolean"
137 #define CONFIG_EMUL_UART1 0
139 /// For serial debug. $WIZ$ type = "boolean"
140 #define CONFIG_SER_STROBE 0
142 #endif /* CFG_SER_H */