4 * This file is part of BeRTOS.
6 * Bertos is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 * As a special exception, you may use this file as part of a free software
21 * library without restriction. Specifically, if other files instantiate
22 * templates or use macros or inline functions from this file, or you compile
23 * this file and link it with other files to produce an executable, this
24 * file does not by itself cause the resulting executable to be covered by
25 * the GNU General Public License. This exception does not however
26 * invalidate any other reasons why the executable file might be covered by
27 * the GNU General Public License.
29 * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
30 * All Rights Reserved.
33 * \brief Configuration file for serial module.
37 * \author Daniele Basile <asterix@develer.com>
44 * Example of setting for serial port and
46 * Edit these define for your project.
49 /// Serial port settings. $WIZARD = { "type" : "int" }
50 #define CONFIG_SER_PORT 0
51 /// Serial port baudrate. $WIZARD = { "type" : "int" }
52 #define CONFIG_SER_BAUDRATE 115200
54 /// Spi port settings. $WIZARD = { "type" : "int" }
55 #define CONFIG_SPI_PORT 0
56 /// Spi port baudrate. $WIZARD = { "type" : "int" }
57 #define CONFIG_SPI_BAUDRATE 5000000UL
60 /// [bytes] Size of the outbound FIFO buffer for port 0. $WIZARD = { "type" : "int" }
61 #define CONFIG_UART0_TXBUFSIZE 32
63 /// [bytes] Size of the inbound FIFO buffer for port 0. $WIZARD = { "type" : "int" }
64 #define CONFIG_UART0_RXBUFSIZE 32
66 /// [bytes] Size of the outbound FIFO buffer for port 1. $WIZARD = { "type" : "int" }
67 #define CONFIG_UART1_TXBUFSIZE 32
69 /// [bytes] Size of the inbound FIFO buffer for port 1. $WIZARD = { "type" : "int" }
70 #define CONFIG_UART1_RXBUFSIZE 32
73 /// [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). $WIZARD = { "type" : "int" }
74 #define CONFIG_SPI_TXBUFSIZE 32
76 /// [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). $WIZARD = { "type" : "int" }
77 #define CONFIG_SPI_RXBUFSIZE 32
79 /// [bytes] Size of the outbound FIFO buffer for SPI port 0. $WIZARD = { "type" : "int" }
80 #define CONFIG_SPI0_TXBUFSIZE 32
82 /// [bytes] Size of the inbound FIFO buffer for SPI port 0. $WIZARD = { "type" : "int" }
83 #define CONFIG_SPI0_RXBUFSIZE 32
85 /// [bytes] Size of the outbound FIFO buffer for SPI port 1. $WIZARD = { "type" : "int" }
86 #define CONFIG_SPI1_TXBUFSIZE 32
88 /// [bytes] Size of the inbound FIFO buffer for SPI port 1. $WIZARD = { "type" : "int" }
89 #define CONFIG_SPI1_RXBUFSIZE 32
92 * SPI data order (AVR only).
96 * "value_list" : "ser_order_bit"
99 #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
101 /// SPI clock division factor (AVR only). $WIZARD = { "type" : "int" }
102 #define CONFIG_SPI_CLOCK_DIV 16
104 * SPI clock polarity: normal low or normal high (AVR only).
107 * "value_list" : "ser_spi_pol"
110 #define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
113 * SPI clock phase you can choose sample on first edge or
114 * sample on second clock edge (AVR only)
117 * "value_list" : "ser_spi_phase"
120 #define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
122 /// Default transmit timeout (ms). Set to -1 to disable timeout support. $WIZARD = { "type" : "int" }
123 #define CONFIG_SER_TXTIMEOUT -1
125 /// Default receive timeout (ms). Set to -1 to disable timeout support. $WIZARD = { "type" : "int" }
126 #define CONFIG_SER_RXTIMEOUT -1
128 /// Use RTS/CTS handshake. $WIZARD = { "type" : "boolean" }
129 #define CONFIG_SER_HWHANDSHAKE 0
131 /// Default baud rate (set to 0 to disable). $WIZARD = { "type" : "boolean" }
132 #define CONFIG_SER_DEFBAUDRATE 0
134 /// Enable ser_gets() and ser_gets_echo(). $WIZARD = { "type" : "boolean" }
135 #define CONFIG_SER_GETS 0
137 /// Enable second serial port in emulator. $WIZARD = { "type" : "boolean" }
138 #define CONFIG_EMUL_UART1 0
140 /// For serial debug. $WIZARD = { "type" : "boolean" }
141 #define CONFIG_SER_STROBE 0
143 #endif /* CFG_SER_H */