4 * This file is part of BeRTOS.
6 * Bertos is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 * As a special exception, you may use this file as part of a free software
21 * library without restriction. Specifically, if other files instantiate
22 * templates or use macros or inline functions from this file, or you compile
23 * this file and link it with other files to produce an executable, this
24 * file does not by itself cause the resulting executable to be covered by
25 * the GNU General Public License. This exception does not however
26 * invalidate any other reasons why the executable file might be covered by
27 * the GNU General Public License.
29 * Copyright 2005, 2010 Develer S.r.l. (http://www.develer.com/)
35 * \author Bernie Innocenti <bernie@codewiz.org>
36 * \author Francesco Sacchi <batt@develer.com>
37 * \author Luca Ottaviano <lottaviano@develer.com>
39 * \brief Low-level timer module for AVR (implementation).
41 * This module is automatically included so no need to include
46 #include <drv/timer_avr.h>
47 #include <cfg/macros.h> // BV()
49 #include <cpu/types.h>
54 #if CPU_AVR_ATMEGA1281 || CPU_AVR_ATMEGA168 || CPU_AVR_ATMEGA328P
55 #define REG_TIFR0 TIFR0
56 #define REG_TIFR1 TIFR1
57 #define REG_TIFR2 TIFR2
58 #if CPU_AVR_ATMEGA1281
59 #define REG_TIFR3 TIFR3
62 #define REG_TIMSK0 TIMSK0
63 #define REG_TIMSK1 TIMSK1
64 #define REG_TIMSK2 TIMSK2
65 #if CPU_AVR_ATMEGA1281
66 #define REG_TIMSK3 TIMSK3
69 #define REG_TCCR0A TCCR0A
70 #define REG_TCCR0B TCCR0B
72 #define REG_TCCR2A TCCR2A
73 #define REG_TCCR2B TCCR2B
75 #define REG_OCR0A OCR0A
76 #define REG_OCR2A OCR2A
78 #define BIT_OCF0A OCF0A
79 #define BIT_OCF2A OCF2A
81 #define BIT_OCIE0A OCIE0A
82 #define BIT_OCIE2A OCIE2A
84 #define REG_TIFR0 TIFR
85 #define REG_TIFR1 TIFR
86 #define REG_TIFR2 TIFR
88 #define REG_TIMSK0 TIMSK
89 #define REG_TIMSK1 TIMSK
90 #define REG_TIMSK2 TIMSK
91 #define REG_TIMSK3 ETIMSK
93 #define REG_TCCR0A TCCR0
94 #define REG_TCCR0B TCCR0
96 #define REG_TCCR2A TCCR2
97 #define REG_TCCR2B TCCR2
99 #define REG_OCR0A OCR0
100 #define REG_OCR2A OCR2
102 #define BIT_OCF0A OCF0
103 #define BIT_OCF2A OCF2
105 #define BIT_OCIE0A OCIE0
106 #define BIT_OCIE2A OCIE2
109 #if CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA103
110 /* These ATMega have different prescaler options. */
111 #define TIMER0_PRESCALER_64 BV(CS02)
112 #define TIMER2_PRESCALER_64 (BV(CS21) | BV(CS20))
114 #define TIMER0_PRESCALER_64 (BV(CS01) | BV(CS00))
115 #define TIMER2_PRESCALER_64 BV(CS22)
118 /** HW dependent timer initialization */
119 #if (CONFIG_TIMER == TIMER_ON_OUTPUT_COMPARE0)
121 void timer_hw_init(void)
124 IRQ_SAVE_DISABLE(flags);
126 /* Reset Timer flags */
127 REG_TIFR0 = BV(BIT_OCF0A) | BV(TOV0);
129 /* Setup Timer/Counter interrupt */
130 ASSR = 0x00; /* Internal system clock */
132 REG_TCCR0A = 0; // TCCR2 reg could be separate or a unique register with both A & B values, this is needed to
135 REG_TCCR0A = BV(WGM01); /* Clear on Compare match */
136 #if TIMER_PRESCALER == 64
137 REG_TCCR0B |= TIMER0_PRESCALER_64;
139 #error Unsupported value of TIMER_PRESCALER
142 TCNT0 = 0x00; /* Initialization of Timer/Counter */
143 REG_OCR0A = OCR_DIVISOR; /* Timer/Counter Output Compare Register */
145 /* Enable timer interrupts: Timer/Counter2 Output Compare (OCIE2) */
146 REG_TIMSK0 &= ~BV(TOIE0);
147 REG_TIMSK0 |= BV(BIT_OCIE0A);
152 #elif (CONFIG_TIMER == TIMER_ON_OVERFLOW1)
154 void timer_hw_init(void)
157 IRQ_SAVE_DISABLE(flags);
159 /* Reset Timer overflow flag */
160 REG_TIFR1 |= BV(TOV1);
162 /* Fast PWM mode, 9 bit, 24 kHz, no prescaling. */
163 #if (TIMER_PRESCALER == 1) && (TIMER_HW_BITS == 9)
165 TCCR1A &= ~BV(WGM10);
166 TCCR1B |= BV(WGM12) | BV(CS10);
167 TCCR1B &= ~(BV(WGM13) | BV(CS11) | BV(CS12));
168 /* Fast PWM mode, 8 bit, 24 kHz, no prescaling. */
169 #elif (TIMER_PRESCALER == 1) && (TIMER_HW_BITS == 8)
171 TCCR1A &= ~BV(WGM11);
172 TCCR1B |= BV(WGM12) | BV(CS10);
173 TCCR1B &= ~(BV(WGM13) | BV(CS11) | BV(CS12));
175 #error Unsupported value of TIMER_PRESCALER or TIMER_HW_BITS
178 TCNT1 = 0x00; /* initialization of Timer/Counter */
180 /* Enable timer interrupt: Timer/Counter1 Overflow */
181 REG_TIMSK1 |= BV(TOIE1);
186 #elif (CONFIG_TIMER == TIMER_ON_OUTPUT_COMPARE2)
187 void timer_hw_init(void)
190 IRQ_SAVE_DISABLE(flags);
192 /* Reset Timer flags */
193 REG_TIFR2 = BV(BIT_OCF2A) | BV(TOV2);
195 /* Setup Timer/Counter interrupt */
196 REG_TCCR2A = 0; // TCCR2 reg could be separate or a unique register with both A & B values, this is needed to
197 REG_TCCR2B = 0; // ensure correct initialization.
199 REG_TCCR2A = BV(WGM21);
200 #if TIMER_PRESCALER == 64
201 REG_TCCR2B |= TIMER2_PRESCALER_64;
203 #error Unsupported value of TIMER_PRESCALER
206 /* Clear on Compare match & prescaler = 64, internal sys clock.
207 When changing prescaler change TIMER_HW_HPTICKS_PER_SEC too */
208 TCNT2 = 0x00; /* initialization of Timer/Counter */
209 REG_OCR2A = OCR_DIVISOR; /* Timer/Counter Output Compare Register */
211 /* Enable timer interrupts: Timer/Counter2 Output Compare (OCIE2) */
212 REG_TIMSK2 &= ~BV(TOIE2);
213 REG_TIMSK2 |= BV(BIT_OCIE2A);
218 #elif (CONFIG_TIMER == TIMER_ON_OVERFLOW3)
220 void timer_hw_init(void)
223 IRQ_SAVE_DISABLE(flags);
225 /* Reset Timer overflow flag */
226 REG_TIFR3 |= BV(TOV3);
228 /* Fast PWM mode, 9 bit, 24 kHz, no prescaling. */
229 #if (TIMER_PRESCALER == 1) && (TIMER_HW_BITS == 9)
231 TCCR3A &= ~BV(WGM30);
232 TCCR3B |= BV(WGM32) | BV(CS30);
233 TCCR3B &= ~(BV(WGM33) | BV(CS31) | BV(CS32));
234 /* Fast PWM mode, 8 bit, 24 kHz, no prescaling. */
235 #elif (TIMER_PRESCALER == 1) && (TIMER_HW_BITS == 8)
237 TCCR3A &= ~BV(WGM31);
238 TCCR3B |= BV(WGM32) | BV(CS30);
239 TCCR3B &= ~(BV(WGM33) | BV(CS31) | BV(CS32));
241 #error Unsupported value of TIMER_PRESCALER or TIMER_HW_BITS
244 /* initialization of Timer/Counter */
247 /* Enable timer interrupt: Timer/Counter3 Overflow */
248 REG_TIMSK3 = |= BV(TOIE3);
254 #error Unimplemented value for CONFIG_TIMER
255 #endif /* CONFIG_TIMER */