4 * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
8 * \brief DevLib configuration options
10 * You should copy this header in your project and rename it to
11 * "config.h" and delete the CONFIG_ macros for the modules
14 * <h2>Working with multiple applications</h2>
16 * If your project is made of multiple DevLib-based applications,
17 * create a custom "config.h" file in each application subdirectory
18 * and play with the compiler include path to get the desired result.
19 * You can share common options by creationg a "config_common.h" header
20 * and including it from all your "config.h" copies.
22 * <h2>Configuration style</h2>
24 * For improved compile-time checking of configuration options,
25 * the preferred way to use a \c CONFIG_ symbol is keeping it
26 * always defined with a value of either 0 or 1. This lets
27 * you write tests like this:
36 * #endif // CONFIG_FOO
39 * In most cases, we rely on the optimizer to discard checks
40 * on constant values and performing dead-code elimination.
43 * \author Bernardo Innocenti <bernie@develer.com>
44 * \author Stefano Fedrigo <aleph@develer.com>
49 *#* Revision 1.1 2005/04/11 19:04:13 bernie
50 *#* Move top-level headers to cfg/ subdir.
52 *#* Revision 1.5 2004/12/08 08:04:28 bernie
53 *#* Add missing config options.
55 *#* Revision 1.4 2004/08/25 14:12:08 rasky
56 *#* Aggiornato il comment block dei log RCS
58 *#* Revision 1.3 2004/08/24 14:30:11 bernie
59 *#* Use new-style config macros for drv/timer.c
61 *#* Revision 1.2 2004/08/05 18:46:52 bernie
62 *#* Documentation improvements.
64 *#* Revision 1.1 2004/07/29 23:34:32 bernie
65 *#* Add template configuration file.
69 #ifndef CONFIG_COMMON_H
70 #define CONFIG_COMMON_H
72 /*! Baud-rate for the kdebug console */
73 #define CONFIG_KDEBUG_BAUDRATE 19200
76 * printf()-style formatter configuration.
79 * \sa PRINTF_NOMODIFIERS
84 #define CONFIG_PRINTF PRINTF_FULL
87 * Multithreading kernel
91 #define CONFIG_KERNEL 0
94 * \name Serial driver parameters
97 /*! Size of the outbound FIFO buffer for all ports (bytes) */
98 #define CONFIG_SER_TXBUFSIZE 32
99 /*! Size of the inbound FIFO buffer for all ports (bytes) */
100 #define CONFIG_SER_RXBUFSIZE 64
102 /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
103 #define CONFIG_SER_TXTIMEOUT -1
104 /*! Default receive timeout (ms). Set to -1 to disable timeout support */
105 #define CONFIG_SER_RXTIMEOUT -1
107 /*! Use RTS/CTS handshake */
108 #define CONFIG_SER_HWHANDSHAKE 0
110 /*! Default baud rate (set to 0 to disable) */
111 #define CONFIG_SER_DEFBAUDRATE 0
113 /*! Enable ser_gets() and ser_gets_echo() */
114 #define CONFIG_SER_GETS 0
117 * Transmit always something on serial port 0 TX
118 * to avoid interference when sending burst of data,
119 * using AVR multiprocessor serial mode
121 #define CONFIG_SER_TXFILL 0
123 #define CONFIG_SER_STROBE 0
127 * \name KBus configuration
130 /*! Board address for KBus */
131 #define CONFIG_KBUS_ADDR KBUS_ADDR_FOOBAR
133 /*! Disable KBUS escaping support */
134 #define CONFIG_KBUS_ESCAPE 0
136 /*! Serial port for internal KBUS communication */
137 #define CONFIG_KBUS_PORT 0
139 /*! Serial port speed for KBus communication */
140 #define CONFIG_KBUS_BAUDRATE 19200
143 //! Hardware timer selection for drv/timer.c
144 #define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
146 #define CONFIG_TIMER_STROBE 0
148 //! EEPROM type for drv/eeprom.c
149 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
151 #endif /* CONFIG_COMMON_H */