4 * This file is part of BeRTOS.
\r
6 * Bertos is free software; you can redistribute it and/or modify
\r
7 * it under the terms of the GNU General Public License as published by
\r
8 * the Free Software Foundation; either version 2 of the License, or
\r
9 * (at your option) any later version.
\r
11 * This program is distributed in the hope that it will be useful,
\r
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
\r
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
\r
14 * GNU General Public License for more details.
\r
16 * You should have received a copy of the GNU General Public License
\r
17 * along with this program; if not, write to the Free Software
\r
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
\r
20 * As a special exception, you may use this file as part of a free software
\r
21 * library without restriction. Specifically, if other files instantiate
\r
22 * templates or use macros or inline functions from this file, or you compile
\r
23 * this file and link it with other files to produce an executable, this
\r
24 * file does not by itself cause the resulting executable to be covered by
\r
25 * the GNU General Public License. This exception does not however
\r
26 * invalidate any other reasons why the executable file might be covered by
\r
27 * the GNU General Public License.
\r
29 * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
\r
30 * All Rights Reserved.
\r
33 * \brief Configuration file for serial module.
\r
35 * \version $Id: cfg_ser.h 2571 2009-04-20 10:37:07Z batt $
\r
37 * \author Daniele Basile <asterix@develer.com>
\r
44 * Example of setting for serial port and
\r
46 * Edit these define for your project.
\r
49 /// [bytes] Size of the outbound FIFO buffer for port 0.
\r
50 #define CONFIG_UART0_TXBUFSIZE 32
\r
52 /// [bytes] Size of the inbound FIFO buffer for port 0.
\r
53 #define CONFIG_UART0_RXBUFSIZE 32
\r
55 /// [bytes] Size of the outbound FIFO buffer for port 1.
\r
56 #define CONFIG_UART1_TXBUFSIZE 32
\r
58 /// [bytes] Size of the inbound FIFO buffer for port 1.
\r
59 #define CONFIG_UART1_RXBUFSIZE 32
\r
62 /// [bytes] Size of the outbound FIFO buffer for SPI port (AVR only)
\r
63 #define CONFIG_SPI_TXBUFSIZE 32
\r
65 /// [bytes] Size of the inbound FIFO buffer for SPI port (AVR only)
\r
66 #define CONFIG_SPI_RXBUFSIZE 32
\r
68 /// [bytes] Size of the outbound FIFO buffer for SPI port 0.
\r
69 #define CONFIG_SPI0_TXBUFSIZE 32
\r
71 /// [bytes] Size of the inbound FIFO buffer for SPI port 0.
\r
72 #define CONFIG_SPI0_RXBUFSIZE 32
\r
74 /// [bytes] Size of the outbound FIFO buffer for SPI port 1.
\r
75 #define CONFIG_SPI1_TXBUFSIZE 32
\r
77 /// [bytes] Size of the inbound FIFO buffer for SPI port 1.
\r
78 #define CONFIG_SPI1_RXBUFSIZE 32
\r
80 /// SPI data order (AVR only).
\r
81 #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
\r
83 /// SPI clock division factor (AVR only).
\r
84 #define CONFIG_SPI_CLOCK_DIV 16
\r
86 /// SPI clock polarity: 0 = normal low, 1 = normal high (AVR only).
\r
87 #define CONFIG_SPI_CLOCK_POL 0
\r
89 /// SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only).
\r
90 #define CONFIG_SPI_CLOCK_PHASE 0
\r
92 /// Default transmit timeout (ms). Set to -1 to disable timeout support.
\r
93 #define CONFIG_SER_TXTIMEOUT -1
\r
95 /// Default receive timeout (ms). Set to -1 to disable timeout support.
\r
96 #define CONFIG_SER_RXTIMEOUT -1
\r
98 /// Use RTS/CTS handshake
\r
99 #define CONFIG_SER_HWHANDSHAKE 0
\r
101 /// Default baud rate (set to 0 to disable).
\r
102 #define CONFIG_SER_DEFBAUDRATE 0
\r
104 /// For serial debug.
\r
105 #define CONFIG_SER_STROBE 0
\r
107 #endif /* CFG_SER_H */
\r