4 * This file is part of BeRTOS.
6 * Bertos is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 * As a special exception, you may use this file as part of a free software
21 * library without restriction. Specifically, if other files instantiate
22 * templates or use macros or inline functions from this file, or you compile
23 * this file and link it with other files to produce an executable, this
24 * file does not by itself cause the resulting executable to be covered by
25 * the GNU General Public License. This exception does not however
26 * invalidate any other reasons why the executable file might be covered by
27 * the GNU General Public License.
29 * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
33 * \brief DevLib configuration options
35 * You should copy this header in your project and rename it to
36 * "config.h" and delete the CONFIG_ macros for the modules
39 * <h2>Working with multiple applications</h2>
41 * If your project is made of multiple DevLib-based applications,
42 * create a custom "config.h" file in each application subdirectory
43 * and play with the compiler include path to get the desired result.
44 * You can share common options by creationg a "config_common.h" header
45 * and including it from all your "config.h" copies.
47 * <h2>Configuration style</h2>
49 * For improved compile-time checking of configuration options,
50 * the preferred way to use a \c CONFIG_ symbol is keeping it
51 * always defined with a value of either 0 or 1. This lets
52 * you write tests like this:
61 * #endif // CONFIG_FOO
64 * In most cases, we rely on the optimizer to discard checks
65 * on constant values and performing dead-code elimination.
68 * \author Bernie Innocenti <bernie@codewiz.org>
69 * \author Stefano Fedrigo <aleph@develer.com>
74 *#* Revision 1.1 2007/02/15 18:17:51 asterix
75 *#* Add randpool test program.
77 *#* Revision 1.16 2007/02/12 15:29:41 asterix
78 *#* Add CONFIG_RANDPOOL_TIMER macro to swich on or off timer support in randpool.
80 *#* Revision 1.15 2007/02/08 14:20:35 asterix
81 *#* Add CONFIG_SIZE_ENTROPY_POOL.
83 *#* Revision 1.14 2007/02/06 11:37:26 asterix
84 *#* Add CONFIG_MD2_STD_PERM for use standard permutation in MD2.
86 *#* Revision 1.13 2007/01/31 13:49:40 asterix
87 *#* Add config size block for MD2
89 *#* Revision 1.3 2006/09/13 18:29:22 bernie
90 *#* Add a few missing CONFIG_ definitions.
92 *#* Revision 1.2 2006/07/19 12:56:24 bernie
93 *#* Convert to new Doxygen style.
95 *#* Revision 1.1 2006/05/18 00:40:43 bernie
96 *#* Rename appconfig.h to appconfig_common.h.
98 *#* Revision 1.11 2006/04/11 00:08:53 bernie
99 *#* Add smooth scrolling for menus.
101 *#* Revision 1.10 2006/03/22 09:48:51 bernie
102 *#* Add a few more config options.
104 *#* Revision 1.9 2006/02/24 00:27:35 bernie
105 *#* Enable kernel and fix Doxygen markup.
107 *#* Revision 1.8 2006/02/21 16:06:05 bernie
108 *#* Update copyright info.
110 *#* Revision 1.7 2006/02/17 22:28:19 bernie
111 *#* Add missing UART definitions.
113 *#* Revision 1.6 2006/02/15 09:12:56 bernie
114 *#* Switch to BITMAP_FMT_PLANAR_V_LSB.
116 *#* Revision 1.5 2006/02/10 12:34:33 bernie
117 *#* Add missing config options for gfx and kbd.
119 *#* Revision 1.4 2006/01/23 23:12:27 bernie
120 *#* Enable CONFIG_GFX_VCOORDS.
122 *#* Revision 1.3 2006/01/17 02:30:06 bernie
123 *#* Add new config vars.
125 *#* Revision 1.2 2005/11/27 03:04:57 bernie
126 *#* CONFIG_WATCHDOG: New config option.
128 *#* Revision 1.1 2005/11/04 17:42:12 bernie
129 *#* Move cfg/config.h to appconfig.h.
135 /** Baud-rate for the kdebug console */
136 #define CONFIG_KDEBUG_BAUDRATE 19200
139 * printf()-style formatter configuration.
141 * \sa PRINTF_DISABLED
142 * \sa PRINTF_NOMODIFIERS
147 #define CONFIG_PRINTF PRINTF_FULL
150 * Multithreading kernel.
154 #define CONFIG_KERN 0
157 * \name Serial driver parameters
160 /** [bytes] Size of the outbound FIFO buffer for port 0. */
161 #define CONFIG_UART0_TXBUFSIZE 32
163 /** [bytes] Size of the inbound FIFO buffer for port 0. */
164 #define CONFIG_UART0_RXBUFSIZE 64
166 /** [bytes] Size of the outbound FIFO buffer for port 1. */
167 #define CONFIG_UART1_TXBUFSIZE 32
169 /** [bytes] Size of the inbound FIFO buffer for port 1. */
170 #define CONFIG_UART1_RXBUFSIZE 64
172 /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
173 #define CONFIG_SPI_TXBUFSIZE 16
175 /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
176 #define CONFIG_SPI_RXBUFSIZE 32
178 /** SPI data order (AVR only). */
179 #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
181 /** SPI clock division factor (AVR only). */
182 #define CONFIG_SPI_CLOCK_DIV 16
184 /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
185 #define CONFIG_SPI_CLOCK_POL 0
187 /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
188 #define CONFIG_SPI_CLOCK_PHASE 0
190 /** Default transmit timeout (ms). Set to -1 to disable timeout support */
191 #define CONFIG_SER_TXTIMEOUT -1
193 /** Default receive timeout (ms). Set to -1 to disable timeout support */
194 #define CONFIG_SER_RXTIMEOUT -1
196 /** Use RTS/CTS handshake */
197 #define CONFIG_SER_HWHANDSHAKE 0
199 /** Default baud rate (set to 0 to disable) */
200 #define CONFIG_SER_DEFBAUDRATE 0
202 /** Enable ser_gets() and ser_gets_echo() */
203 #define CONFIG_SER_GETS 0
205 /** Enable second serial port in emulator. */
206 #define CONFIG_EMUL_UART1 0
208 #define CONFIG_SER_STROBE 0
211 /// Hardware timer selection for drv/timer.c
212 #define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
214 /// Debug timer interrupt using a strobe pin.
215 #define CONFIG_TIMER_STROBE 0
217 /// Enable ADS strobe.
218 #define CONFIG_ADC_STROBE 0
220 /// Enable watchdog timer.
221 #define CONFIG_WATCHDOG 0
223 /// EEPROM type for drv/eeprom.c
224 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
226 /// Select bitmap pixel format.
227 #define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
229 /// Enable line clipping algorithm.
230 #define CONFIG_GFX_CLIPPING 1
232 /// Enable text rendering in bitmaps.
233 #define CONFIG_GFX_TEXT 1
235 /// Enable virtual coordinate system.
236 #define CONFIG_GFX_VCOORDS 1
238 /// Keyboard polling method
239 #define CONFIG_KBD_POLL KBD_POLL_SOFTINT
241 /// Enable keyboard event delivery to observers
242 #define CONFIG_KBD_OBSERVER 0
245 #define CONFIG_KBD_BEEP 1
247 /// Enable long pression handler for keys
248 #define CONFIG_KBD_LONGPRESS 1
251 * \name Type for the chart dataset
254 #define CONFIG_CHART_TYPE_X uint8_t
255 #define CONFIG_CHART_TYPE_Y uint8_t
258 /// Enable button bar behind menus
259 #define CONFIG_MENU_MENUBAR 0
261 /// Enable smooth scrolling in menus
262 #define CONFIG_MENU_SMOOTH 1
264 /// Size of block for MD2 algorithm.
265 #define CONFIG_MD2_BLOCK_LEN 16
267 /// Use standard permutation in MD2 algorithm.
268 #define CONFIG_MD2_STD_PERM 0
270 /// Define a size, in byte, of entropy pool.
271 #define CONFIG_SIZE_ENTROPY_POOL 256
273 /// Turn on or off timer support in Randpool.
274 #define CONFIG_RANDPOOL_TIMER 1
276 #endif /* APPCONFIG_H */