* In most cases, we rely on the optimizer to discard checks
* on constant values and performing dead-code elimination.
*
- * \version $Id$
+ * \version $Id: appconfig.h 18242 2007-10-08 17:35:23Z marco $
* \author Bernardo Innocenti <bernie@develer.com>
* \author Stefano Fedrigo <aleph@develer.com>
*/
-#ifndef APPCONFIG_COMMON_H
-#define APPCONFIG_COMMON_H
+#ifndef APPCONFIG_H
+#define APPCONFIG_H
/** kdebug console */
#define CONFIG_KDEBUG_PORT 0
-
/** Baud-rate for the kdebug console */
#define CONFIG_KDEBUG_BAUDRATE 19200
*
* \sa config_kern.h
*/
-#define CONFIG_KERNEL 0
+#define CONFIG_KERNEL 1
/**
* \name Serial driver parameters
/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_RXBUFSIZE 32
- /** SPI data order (AVR only). */
- #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
-
- /** SPI clock division factor (AVR only). */
- #define CONFIG_SPI_CLOCK_DIV 16
-
- /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
- #define CONFIG_SPI_CLOCK_POL 0
-
- /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
- #define CONFIG_SPI_CLOCK_PHASE 0
-
/** Default transmit timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_TXTIMEOUT -1
/// Debug timer interrupt using a strobe pin.
#define CONFIG_TIMER_STROBE 0
-/// Enable ADS strobe.
-#define CONFIG_ADC_STROBE 0
-
/// Enable watchdog timer.
-#define CONFIG_WATCHDOG 0
+#define CONFIG_WATCHDOG 1
/// EEPROM type for drv/eeprom.c
#define CONFIG_EEPROM_TYPE EEPROM_24XX256
#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
/// Enable line clipping algorithm.
-#define CONFIG_GFX_CLIPPING 1
+#define CONFIG_GFX_CLIPPING 1
/// Enable text rendering in bitmaps.
-#define CONFIG_GFX_TEXT 1
+#define CONFIG_GFX_TEXT 1
/// Enable virtual coordinate system.
-#define CONFIG_GFX_VCOORDS 1
+#define CONFIG_GFX_VCOORDS 1
/// Keyboard polling method
#define CONFIG_KBD_POLL KBD_POLL_SOFTINT
/// Enable keyboard event delivery to observers
#define CONFIG_KBD_OBSERVER 0
-/// Enable key beeps
+/// Enable key beeps.
#define CONFIG_KBD_BEEP 1
/// Enable long pression handler for keys
-#define CONFIG_KBD_LONGPRESS 1
+#define CONFIG_KBD_LONGPRESS 0
/**
* \name Type for the chart dataset
/// Enable button bar behind menus
#define CONFIG_MENU_MENUBAR 0
-/// Enable smooth scrolling in menus
+/// Enable smooth scrolling in menus.
#define CONFIG_MENU_SMOOTH 1
-/// Size of block for MD2 algorithm.
-#define CONFIG_MD2_BLOCK_LEN 16
-
-/// Use standard permutation in MD2 algorithm.
-#define CONFIG_MD2_STD_PERM 0
+/// Abort menu after this amount of time.
+#define CONFIG_MENU_TIMEOUT 0 /* ms */
-/// Define a size, in byte, of entropy pool.
-#define CONFIG_SIZE_ENTROPY_POOL 64
+/// Accept input implicitly after this amount of time.
+#define CONFIG_LEVELEDIT_TIMEOUT 3000 /* ms */
-/// Turn on or off timer support in Randpool.
-#define CONFIG_RANDPOOL_TIMER 1
+/// LCD bus size. If 0 use 8bit bus.
+#define CONFIG_LCD_4BIT 0
#endif /* APPCONFIG_H */