-/*!
+/**
* \file
* <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
* Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
* -->
*
* \brief DevLib configuration options
/*#*
*#* $Log$
+ *#* Revision 1.5 2006/09/20 19:55:01 marco
+ *#* Added CONFIG_LCD_4BIT.
+ *#*
+ *#* Revision 1.4 2006/09/13 18:29:22 bernie
+ *#* Add a few missing CONFIG_ definitions.
+ *#*
+ *#* Revision 1.3 2006/07/19 12:56:24 bernie
+ *#* Convert to new Doxygen style.
+ *#*
*#* Revision 1.2 2006/05/28 12:18:12 bernie
*#* Disable menu timeout.
*#*
*#* Move cfg/config.h to appconfig.h.
*#*/
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
+#ifndef APPCONFIG_H
+#define APPCONFIG_H
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
#define CONFIG_KDEBUG_BAUDRATE 19200
-/*!
+/**
* printf()-style formatter configuration.
*
* \sa PRINTF_DISABLED
*/
#define CONFIG_PRINTF PRINTF_FULL
-/*!
+/**
* Multithreading kernel.
*
* \sa config_kern.h
*/
#define CONFIG_KERNEL 1
-/*!
+/**
* \name Serial driver parameters
* \{
*/
- /*! [bytes] Size of the outbound FIFO buffer for port 0. */
+ /** [bytes] Size of the outbound FIFO buffer for port 0. */
#define CONFIG_UART0_TXBUFSIZE 32
- /*! [bytes] Size of the inbound FIFO buffer for port 0. */
+ /** [bytes] Size of the inbound FIFO buffer for port 0. */
#define CONFIG_UART0_RXBUFSIZE 64
- /*! [bytes] Size of the outbound FIFO buffer for port 1. */
+ /** [bytes] Size of the outbound FIFO buffer for port 1. */
#define CONFIG_UART1_TXBUFSIZE 32
- /*! [bytes] Size of the inbound FIFO buffer for port 1. */
+ /** [bytes] Size of the inbound FIFO buffer for port 1. */
#define CONFIG_UART1_RXBUFSIZE 64
- /*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+ /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_TXBUFSIZE 16
- /*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+ /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_RXBUFSIZE 32
- /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+ /** Default transmit timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_TXTIMEOUT -1
- /*! Default receive timeout (ms). Set to -1 to disable timeout support */
+ /** Default receive timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_RXTIMEOUT -1
- /*! Use RTS/CTS handshake */
+ /** Use RTS/CTS handshake */
#define CONFIG_SER_HWHANDSHAKE 0
- /*! Default baud rate (set to 0 to disable) */
+ /** Default baud rate (set to 0 to disable) */
#define CONFIG_SER_DEFBAUDRATE 0
- /*! Enable ser_gets() and ser_gets_echo() */
+ /** Enable ser_gets() and ser_gets_echo() */
#define CONFIG_SER_GETS 0
/** Enable second serial port in emulator. */
#define CONFIG_EMUL_UART1 0
- /*!
+ /**
* Transmit always something on serial port 0 TX
* to avoid interference when sending burst of data,
* using AVR multiprocessor serial mode
#define CONFIG_SER_STROBE 0
/*\}*/
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
#define CONFIG_TIMER_STROBE 0
-//! Enable watchdog timer.
+/// Enable watchdog timer.
#define CONFIG_WATCHDOG 1
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
#define CONFIG_EEPROM_TYPE EEPROM_24XX256
/// Select bitmap pixel format.
/// Enable key beeps.
#define CONFIG_KBD_BEEP 1
-/*!
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS 0
+
+/**
* \name Type for the chart dataset
* \{
*/
/// Accept input implicitly after this amount of time.
#define CONFIG_LEVELEDIT_TIMEOUT 3000 /* ms */
-#endif /* CONFIG_COMMON_H */
+/// LCD bus size. If 0 use 8bit bus.
+#define CONFIG_LCD_4BIT 0
+
+#endif /* APPCONFIG_H */