* the GNU General Public License.
*
* Copyright 2003, 2004, 2005 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2000 Bernardo Innocenti <bernie@develer.com>
+ * Copyright 2000 Bernie Innocenti <bernie@codewiz.org>
*
* -->
*
+ * \brief Low-level timer module for AVR (interface).
+ *
* \version $Id$
*
- * \author Bernardo Innocenti <bernie@develer.com>
+ * \author Bernie Innocenti <bernie@codewiz.org>
* \author Francesco Sacchi <batt@develer.com>
*
- * \brief Low-level timer module for AVR (interface).
*/
-/*#*
- *#* $Log$
- *#* Revision 1.32 2007/10/08 12:14:32 batt
- *#* Fix some review issues.
- *#*
- *#* Revision 1.31 2007/10/07 12:30:55 batt
- *#* Add default timer for AVR.
- *#*
- *#* Revision 1.30 2007/06/07 14:35:12 batt
- *#* Merge from project_ks.
- *#*
- *#* Revision 1.29 2007/03/21 11:01:36 batt
- *#* Add missing support for ATMega1281.
- *#*
- *#* Revision 1.28 2006/07/19 12:56:26 bernie
- *#* Convert to new Doxygen style.
- *#*
- *#* Revision 1.27 2006/05/18 00:38:24 bernie
- *#* Use hw_cpu.h instead of ubiquitous hw.h.
- *#*
- *#* Revision 1.26 2006/02/21 21:28:02 bernie
- *#* New time handling based on TIMER_TICKS_PER_SEC to support slow timers with ticks longer than 1ms.
- *#*
- *#* Revision 1.25 2005/07/19 07:26:37 bernie
- *#* Refactor to decouple timer ticks from milliseconds.
- *#*
- *#* Revision 1.24 2005/04/11 19:10:28 bernie
- *#* Include top-level headers from cfg/ subdir.
- *#*
- *#* Revision 1.23 2005/03/01 23:24:51 bernie
- *#* Tweaks for avr-libc 1.2.x.
- *#*
- *#* Revision 1.21 2004/12/13 12:07:06 bernie
- *#* DISABLE_IRQSAVE/ENABLE_IRQRESTORE: Convert to IRQ_SAVE_DISABLE/IRQ_RESTORE.
- *#*
- *#* Revision 1.20 2004/11/16 20:59:46 bernie
- *#* Include <avr/io.h> explicitly.
- *#*
- *#* Revision 1.19 2004/10/19 08:56:41 bernie
- *#* TIMER_STROBE_ON, TIMER_STROBE_OFF, TIMER_STROBE_INIT: Move from timer_avr.h to timer.h, where they really belong.
- *#*
- *#* Revision 1.18 2004/09/20 03:31:03 bernie
- *#* Fix racy racy code.
- *#*/
#ifndef DRV_TIMER_AVR_H
#define DRV_TIMER_AVR_H
-#include <appconfig.h> /* CONFIG_TIMER */
+#include <hw/hw_cpufreq.h> /* CPU_FREQ */
+
+#include "cfg/cfg_timer.h" /* CONFIG_TIMER */
#include <cfg/compiler.h> /* uint8_t */
#include <cfg/macros.h> /* DIV_ROUND */
-#include <hw_cpu.h> /* CLOCK_FREQ */
+
/**
* \name Values for CONFIG_TIMER.
*
* Select which hardware timer interrupt to use for system clock and softtimers.
* \note The timer 1 overflow mode set the timer as a 24 kHz PWM.
- *
- * \{
+ * $WIZ$ timer_select = "TIMER_ON_OUTPUT_COMPARE0", "TIMER_ON_OVERFLOW1", "TIMER_ON_OUTPUT_COMPARE2", "TIMER_ON_OVERFLOW3", "TIMER_DEFAULT"
*/
#define TIMER_ON_OUTPUT_COMPARE0 1
#define TIMER_ON_OVERFLOW1 2
#define TIMER_ON_OVERFLOW3 4
#define TIMER_DEFAULT TIMER_ON_OUTPUT_COMPARE0 ///< Default system timer
-/* \} */
/*
* Hardware dependent timer initialization.
#define TIMER_PRESCALER 64
#define TIMER_HW_BITS 8
- #define DEFINE_TIMER_ISR SIGNAL(SIG_OUTPUT_COMPARE0)
+ #if CPU_AVR_ATMEGA1281 || CPU_AVR_ATMEGA168
+ #define DEFINE_TIMER_ISR SIGNAL(SIG_OUTPUT_COMPARE0A)
+ #else
+ #define DEFINE_TIMER_ISR SIGNAL(SIG_OUTPUT_COMPARE0)
+ #endif
#define TIMER_TICKS_PER_SEC 1000
#define TIMER_HW_CNT OCR_DIVISOR
/** Frequency of the hardware high precision timer. */
-#define TIMER_HW_HPTICKS_PER_SEC DIV_ROUND(CLOCK_FREQ, TIMER_PRESCALER)
+#define TIMER_HW_HPTICKS_PER_SEC DIV_ROUND(CPU_FREQ, TIMER_PRESCALER)
/**
* System timer: additional division after the prescaler
* 12288000 / 64 / 192 (0..191) = 1 ms
*/
-#define OCR_DIVISOR (DIV_ROUND(DIV_ROUND(CLOCK_FREQ, TIMER_PRESCALER), TIMER_TICKS_PER_SEC) - 1)
+#define OCR_DIVISOR (DIV_ROUND(DIV_ROUND(CPU_FREQ, TIMER_PRESCALER), TIMER_TICKS_PER_SEC) - 1)
/** Not needed, IRQ timer flag cleared automatically */
#define timer_hw_irq() do {} while (0)