-/*!
+/**
* \file
* <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
* Copyright 2003,2004 Develer S.r.l. (http://www.develer.com/)
* Copyright 2000 Bernardo Innocenti <bernie@codewiz.org>
- * This file is part of DevLib - See devlib/README for information.
+ *
* -->
*
* \brief High level serial I/O API
* \author Bernardo Innocenti <bernie@develer.com>
*/
-/*
- * $Log$
- * Revision 1.8 2004/08/02 20:20:29 aleph
- * Merge from project_ks
- *
- * Revision 1.7 2004/07/30 14:15:53 rasky
- * Nuovo supporto unificato per detect della CPU
- *
- * Revision 1.6 2004/07/29 22:57:09 bernie
- * ser_drain(): New function; Make Serial::is_open a debug-only feature; Switch to new-style CONFIG_* macros.
- *
- * Revision 1.5 2004/07/18 21:54:23 bernie
- * Add ATmega8 support.
- *
- * Revision 1.4 2004/06/03 11:27:09 bernie
- * Add dual-license information.
- *
- * Revision 1.3 2004/06/02 21:35:24 aleph
- * Serial enhancements: interruptible receive handler and 8 bit serial status for AVR; remove volatile attribute to FIFOBuffer, useless for new fifobuf routens
- *
- * Revision 1.2 2004/05/23 18:21:53 bernie
- * Trim CVS logs and cleanup header info.
- *
- */
+/*#*
+ *#* $Log$
+ *#* Revision 1.36 2007/01/29 11:30:30 batt
+ *#* Reimplement ser_clearstatus as a macro.
+ *#*
+ *#* Revision 1.35 2007/01/27 20:47:12 batt
+ *#* Add clear status.
+ *#*
+ *#* Revision 1.34 2006/11/20 15:07:40 batt
+ *#* Revert unneeded locked functions.
+ *#*
+ *#* Revision 1.33 2006/11/17 17:03:58 batt
+ *#* Implement ser_setstatus and ser_getstatus as functions to avoid race conditions.
+ *#*
+ *#* Revision 1.32 2006/11/17 16:01:12 batt
+ *#* Serial status MUST be volatile.
+ *#*
+ *#* Revision 1.31 2006/09/13 18:22:48 bernie
+ *#* Typo.
+ *#*
+ *#* Revision 1.30 2006/09/13 18:21:23 bernie
+ *#* Add configurable SPI pin mapping.
+ *#*
+ *#* Revision 1.29 2006/09/13 13:59:11 bernie
+ *#* Documentation fixes.
+ *#*
+ *#* Revision 1.28 2006/07/21 10:58:00 batt
+ *#* Use timer_clock() instead of obsolete timer_ticks().
+ *#*
+ *#* Revision 1.27 2006/07/19 12:56:26 bernie
+ *#* Convert to new Doxygen style.
+ *#*
+ *#* Revision 1.26 2006/05/18 00:39:13 bernie
+ *#* Add struct Serial friendly typedef.
+ *#*
+ *#* Revision 1.25 2006/02/17 22:28:00 bernie
+ *#* Rename ser_emul.c to ser_posix.c.
+ *#*
+ *#* Revision 1.24 2006/02/17 22:23:06 bernie
+ *#* Update POSIX serial emulator.
+ *#*
+ *#* Revision 1.23 2005/11/27 23:33:40 bernie
+ *#* Use appconfig.h instead of cfg/config.h.
+ *#*
+ *#* Revision 1.22 2005/11/04 16:20:02 bernie
+ *#* Fix reference to README.devlib in header.
+ *#*
+ *#* Revision 1.21 2005/04/11 19:10:27 bernie
+ *#* Include top-level headers from cfg/ subdir.
+ *#*
+ *#* Revision 1.20 2005/01/22 04:20:01 bernie
+ *#* Reformat.
+ *#*
+ *#* Revision 1.19 2005/01/11 18:08:16 aleph
+ *#* Add missing include
+ *#*
+ *#* Revision 1.18 2004/12/08 08:57:17 bernie
+ *#* Rename time_t to mtime_t.
+ *#*
+ *#* Revision 1.17 2004/11/16 21:54:56 bernie
+ *#* Changes for SC Monoboard support.
+ *#*
+ *#* Revision 1.16 2004/10/19 11:48:05 bernie
+ *#* Reformat.
+ *#*
+ *#* Revision 1.15 2004/10/19 08:11:53 bernie
+ *#* SERRF_TX, SERRF_RX: New macros; Enhance documentation.
+ *#*
+ *#* Revision 1.14 2004/10/03 18:43:18 bernie
+ *#* Fix a nasty bug caused by confusion between old-style and new-style configuration macros.
+ *#*
+ *#* Revision 1.13 2004/09/14 21:04:57 bernie
+ *#* Don't vanely call kdebug.h.
+ *#*
+ *#* Revision 1.12 2004/09/06 21:40:50 bernie
+ *#* Move buffer handling in chip-specific driver.
+ *#*
+ *#* Revision 1.11 2004/08/25 14:12:08 rasky
+ *#* Aggiornato il comment block dei log RCS
+ *#*
+ *#* Revision 1.10 2004/08/24 16:20:48 bernie
+ *#* ser_read(): Make buffer argument void *#* for consistency with ANSI C and ser_write()
+ *#*
+ *#* Revision 1.9 2004/08/15 05:32:22 bernie
+ *#* ser_resync(): New function.
+ *#*
+ *#* Revision 1.8 2004/08/02 20:20:29 aleph
+ *#* Merge from project_ks
+ *#*
+ *#* Revision 1.7 2004/07/30 14:15:53 rasky
+ *#* Nuovo supporto unificato per detect della CPU
+ *#*
+ *#* Revision 1.6 2004/07/29 22:57:09 bernie
+ *#* ser_drain(): New function; Make Serial::is_open a debug-only feature; Switch to new-style CONFIG_* macros.
+ *#*
+ *#* Revision 1.5 2004/07/18 21:54:23 bernie
+ *#* Add ATmega8 support.
+ *#*
+ *#* Revision 1.4 2004/06/03 11:27:09 bernie
+ *#* Add dual-license information.
+ *#*
+ *#* Revision 1.3 2004/06/02 21:35:24 aleph
+ *#* Serial enhancements: interruptible receive handler and 8 bit serial status for AVR; remove volatile attribute to FIFOBuffer, useless for new fifobuf routens
+ *#*
+ *#* Revision 1.2 2004/05/23 18:21:53 bernie
+ *#* Trim CVS logs and cleanup header info.
+ *#*
+ *#*/
#ifndef DRV_SER_H
#define DRV_SER_H
#include <mware/fifobuf.h>
-#include <drv/kdebug.h>
-#include <compiler.h>
-#include <config.h>
+#include <cfg/compiler.h>
+#include <cfg/macros.h> /* BV() */
+#include <cfg/os.h>
+#include <appconfig.h>
-/*!
- * \name Serial Error/status flags
- *
- * Some of these flags map directly to the flags
- * in AVR UART Status Register(USR).
- * \todo flags of DSP56k aren't mapped to these flags. Luckily
- * these flags doesn't collide with the DSP56k ones,
- * which are from 0x0100 to 0x8000
- */
+/** \name Serial Error/status flags. */
/*\{*/
+#if CPU_ARM
+ typedef uint32_t serstatus_t;
+
+ /* Software errors */
+ #define SERRF_RXFIFOOVERRUN BV(0) /**< Rx FIFO buffer overrun */
+ #define SERRF_RXTIMEOUT BV(1) /**< Receive timeout */
+ #define SERRF_TXTIMEOUT BV(2) /**< Transmit timeout */
+
+ /*
+ * Hardware errors.
+ * These flags map directly to the ARM USART Channel Status Register (US_CSR).
+ */
+ #define SERRF_RXSROVERRUN BV(5) /**< Rx shift register overrun */
+ #define SERRF_FRAMEERROR BV(6) /**< Stop bit missing */
+ #define SERRF_PARITYERROR BV(7) /**< Parity error */
+ #define SERRF_NOISEERROR 0 /**< Unsupported */
+
#if CPU_AVR
typedef uint8_t serstatus_t;
/* Software errors */
- #define SERRF_RXFIFOOVERRUN BV(0) /*!< Rx FIFO buffer overrun */
- #define SERRF_RXTIMEOUT BV(5) /*!< Receive timeout */
- #define SERRF_TXTIMEOUT BV(6) /*!< Transmit timeout */
+ #define SERRF_RXFIFOOVERRUN BV(0) /**< Rx FIFO buffer overrun */
+ #define SERRF_RXTIMEOUT BV(5) /**< Receive timeout */
+ #define SERRF_TXTIMEOUT BV(6) /**< Transmit timeout */
- /* Hardware errors */
- #define SERRF_RXSROVERRUN BV(3) /*!< Rx shift register overrun */
- #define SERRF_FRAMEERROR BV(4) /*!< Stop bit missing */
- #define SERRF_PARITYERROR BV(7) /*!< Parity error */
+ /*
+ * Hardware errors.
+ * These flags map directly to the AVR UART Status Register (USR).
+ */
+ #define SERRF_RXSROVERRUN BV(3) /**< Rx shift register overrun */
+ #define SERRF_FRAMEERROR BV(4) /**< Stop bit missing */
+ #define SERRF_PARITYERROR BV(7) /**< Parity error */
+ #define SERRF_NOISEERROR 0 /**< Unsupported */
#elif CPU_DSP56K
typedef uint16_t serstatus_t;
/* Software errors */
- #define SERRF_RXFIFOOVERRUN BV(0) /*!< Rx FIFO buffer overrun */
- #define SERRF_RXTIMEOUT BV(1) /*!< Receive timeout */
- #define SERRF_TXTIMEOUT BV(2) /*!< Transmit timeout */
+ #define SERRF_RXFIFOOVERRUN BV(0) /**< Rx FIFO buffer overrun */
+ #define SERRF_RXTIMEOUT BV(1) /**< Receive timeout */
+ #define SERRF_TXTIMEOUT BV(2) /**< Transmit timeout */
+
+ /*
+ * Hardware errors.
+ * These flags map directly to the SCI Control Register.
+ */
+ #define SERRF_PARITYERROR BV(8) /**< Parity error */
+ #define SERRF_FRAMEERROR BV(9) /**< Stop bit missing */
+ #define SERRF_NOISEERROR BV(10) /**< Noise error */
+ #define SERRF_RXSROVERRUN BV(11) /**< Rx shift register overrun */
+#elif OS_HOSTED
+ typedef uint16_t serstatus_t;
+
+ /* Software errors */
+ #define SERRF_RXFIFOOVERRUN BV(0) /**< Rx FIFO buffer overrun */
+ #define SERRF_RXTIMEOUT BV(1) /**< Receive timeout */
+ #define SERRF_TXTIMEOUT BV(2) /**< Transmit timeout */
/* Hardware errors */
- #define SERRF_PARITYERROR BV(8) /*!< Parity error */
- #define SERRF_FRAMEERROR BV(9) /*!< Stop bit missing */
- #define SERRF_NOISEERROR BV(10) /*!< Noise error */
- #define SERRF_RXSROVERRUN BV(11) /*!< Rx shift register overrun */
+ #define SERRF_RXSROVERRUN 0 /**< Unsupported in emulated serial port. */
+ #define SERRF_FRAMEERROR 0 /**< Unsupported in emulated serial port. */
+ #define SERRF_PARITYERROR 0 /**< Unsupported in emulated serial port. */
+ #define SERRF_NOISEERROR 0 /**< Unsupported in emulated serial port. */
+
#else
#error unknown architecture
#endif
/*\}*/
-/*! \name Parity settings for ser_setparity() */
-/*\{*/
+/**
+ * \name Masks to group TX/RX errors.
+ * \{
+ */
+#define SERRF_RX \
+ ( SERRF_RXFIFOOVERRUN \
+ | SERRF_RXTIMEOUT \
+ | SERRF_RXSROVERRUN \
+ | SERRF_PARITYERROR \
+ | SERRF_FRAMEERROR \
+ | SERRF_NOISEERROR)
+#define SERRF_TX (SERRF_TXTIMEOUT)
+/*\}*/
+
+/**
+ * \name LSB or MSB first data order, used with SPI AVR serial
+ * \{
+ */
+#define SER_MSB_FIRST 0
+#define SER_LSB_FIRST 1
+/*\}*/
+
+/**
+ * \name Parity settings for ser_setparity().
+ *
+ * \note Values are AVR-specific for performance reasons.
+ * Other processors should either decode them or
+ * redefine these macros.
+ * \{
+ */
#define SER_PARITY_NONE 0
#define SER_PARITY_EVEN 2
#define SER_PARITY_ODD 3
/*\}*/
-/*!
+/**
* \name Serial hw numbers
*
* \{
*/
enum
{
-#if defined(CPU_AVR_ATMEGA64) || defined(CPU_AVR_ATMEGA128)
+#if CPU_ARM_AT91
SER_UART0,
SER_UART1,
SER_SPI,
-#elif defined(CPU_AVR_ATMEGA103) || defined(CPU_AVR_ATMEGA8)
+#if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA1281
+ SER_UART0,
+ SER_UART1,
+ SER_SPI,
+#elif CPU_AVR_ATMEGA103 || CPU_AVR_ATMEGA8
SER_UART0,
SER_SPI,
#elif CPU_DSP56K
+ // \todo since we now support "fake" multiplexed serials, this should be moved to hw.h
+ SER_UART0,
+ SER_PUNTALI,
+ SER_BARCODE,
+#elif OS_HOSTED
SER_UART0,
SER_UART1,
#else
#error unknown architecture
#endif
- SER_CNT /*!< Number of serial ports */
+ SER_CNT /**< Number of serial ports */
};
/*\}*/
struct SerialHardware;
-/*! Human-readable serial error descriptions */
+/** Human-readable serial error descriptions */
extern const char * const serial_errors[8];
-/*! Serial handle structure */
-struct Serial
+/** Serial handle structure */
+typedef struct Serial
{
- /*! Physical port number */
+ /** Physical port number */
unsigned int unit;
- DB(bool is_open;)
+#ifdef _DEBUG
+ bool is_open;
+#endif
- /*!
- * \name FIFO transmit and receive buffers.
+ /**
+ * \name Transmit and receive FIFOs.
*
* Declared volatile because handled asinchronously by interrupts.
*
*/
FIFOBuffer txfifo;
FIFOBuffer rxfifo;
- unsigned char txbuffer[CONFIG_SER_TXBUFSIZE];
- unsigned char rxbuffer[CONFIG_SER_RXBUFSIZE];
/* \} */
#if CONFIG_SER_RXTIMEOUT != -1
- time_t rxtimeout;
+ ticks_t rxtimeout;
#endif
#if CONFIG_SER_TXTIMEOUT != -1
- time_t txtimeout;
+ ticks_t txtimeout;
#endif
- /*! Holds the flags defined above. Will be 0 when no errors have occurred. */
- serstatus_t status;
+ /** Holds the flags defined above. Will be 0 when no errors have occurred. */
+ volatile serstatus_t status;
- /*! Low-level interface to hardware. */
+ /** Low-level interface to hardware. */
struct SerialHardware* hw;
-};
+} Serial;
/* Function prototypes */
extern int ser_getchar_nowait(struct Serial *port);
extern int ser_write(struct Serial *port, const void *buf, size_t len);
-extern int ser_read(struct Serial *port, char *buf, size_t size);
+extern int ser_read(struct Serial *port, void *buf, size_t size);
extern int ser_print(struct Serial *port, const char *s);
extern int ser_printf(struct Serial *port, const char *format, ...) FORMAT(__printf__, 2, 3);
extern void ser_setbaudrate(struct Serial *port, unsigned long rate);
extern void ser_setparity(struct Serial *port, int parity);
-extern void ser_settimeouts(struct Serial *port, time_t rxtimeout, time_t txtimeout);
+extern void ser_settimeouts(struct Serial *port, mtime_t rxtimeout, mtime_t txtimeout);
+extern void ser_resync(struct Serial *port, mtime_t delay);
extern void ser_purge(struct Serial *port);
extern void ser_drain(struct Serial *port);
extern struct Serial *ser_open(unsigned int unit);
extern void ser_close(struct Serial *port);
-/*!
+/**
* \name Additional functions implemented as macros
*
* \{
*/
#define ser_getstatus(h) ((h)->status)
#define ser_setstatus(h, x) ((h)->status = (x))
+#define ser_clearstatus(h) ser_setstatus(h, 0)
/* \} */
#endif /* DRV_SER_H */