* \author Stefano Fedrigo <aleph@develer.com>
*/
-/*
- * $Log$
- * Revision 1.10 2004/08/10 06:30:41 bernie
- * Major redesign of serial bus policy handling.
- *
- * Revision 1.9 2004/08/02 20:20:29 aleph
- * Merge from project_ks
- *
- * Revision 1.8 2004/07/29 22:57:09 bernie
- * Several tweaks to reduce code size on ATmega8.
- *
- * Revision 1.7 2004/07/18 21:54:23 bernie
- * Add ATmega8 support.
- *
- * Revision 1.5 2004/06/27 15:25:40 aleph
- * Add missing callbacks for SPI;
- * Change UNUSED() macro to new version with two args;
- * Use TX line filling only on the correct KBUS serial port;
- * Fix nasty IRQ disabling bug in recv complete hander for port 1.
- *
- * Revision 1.4 2004/06/03 11:27:09 bernie
- * Add dual-license information.
- *
- * Revision 1.3 2004/06/02 21:35:24 aleph
- * Serial enhancements: interruptible receive handler and 8 bit serial status for AVR; remove volatile attribute to FIFOBuffer, useless for new fifobuf routens
- *
- * Revision 1.2 2004/05/23 18:21:53 bernie
- * Trim CVS logs and cleanup header info.
- *
- */
+/*#*
+ *#* $Log$
+ *#* Revision 1.12 2004/08/29 22:06:10 bernie
+ *#* Fix a bug in the (unused) RTS/CTS code; Clarify documentation.
+ *#*
+ *#* Revision 1.10 2004/08/10 06:30:41 bernie
+ *#* Major redesign of serial bus policy handling.
+ *#*
+ *#* Revision 1.9 2004/08/02 20:20:29 aleph
+ *#* Merge from project_ks
+ *#*
+ *#* Revision 1.8 2004/07/29 22:57:09 bernie
+ *#* Several tweaks to reduce code size on ATmega8.
+ *#*
+ *#* Revision 1.7 2004/07/18 21:54:23 bernie
+ *#* Add ATmega8 support.
+ *#*
+ *#* Revision 1.5 2004/06/27 15:25:40 aleph
+ *#* Add missing callbacks for SPI;
+ *#* Change UNUSED() macro to new version with two args;
+ *#* Use TX line filling only on the correct KBUS serial port;
+ *#* Fix nasty IRQ disabling bug in recv complete hander for port 1.
+ *#*
+ *#* Revision 1.4 2004/06/03 11:27:09 bernie
+ *#* Add dual-license information.
+ *#*
+ *#* Revision 1.3 2004/06/02 21:35:24 aleph
+ *#* Serial enhancements: interruptible receive handler and 8 bit serial status for AVR; remove volatile attribute to FIFOBuffer, useless for new fifobuf routens
+ *#*
+ *#* Revision 1.2 2004/05/23 18:21:53 bernie
+ *#* Trim CVS logs and cleanup header info.
+ *#*
+ *#*/
#include "ser.h"
#include "ser_p.h"
-#include "kdebug.h"
#include "config.h"
-#include "hw.h"
+#include "hw.h" /* Required for bus macros overrides */
+
+#include <drv/kdebug.h>
#include <drv/timer.h>
#include <mware/fifobuf.h>
/*!
- * \def CONFIG_SER_STROBE
- *
- * This is a debug facility that can be used to
- * monitor SER interrupt activity on an external pin.
- *
- * To use strobes, redefine the macros SER_STROBE_ON,
- * SER_STROBE_OFF and SER_STROBE_INIT and set
- * CONFIG_SER_STROBE to 1.
- */
-#ifndef CONFIG_SER_STROBE
- #define SER_STROBE_ON do {/*nop*/} while(0)
- #define SER_STROBE_OFF do {/*nop*/} while(0)
- #define SER_STROBE_INIT do {/*nop*/} while(0)
-#endif
-
-
-/*!
- * \name Overridable serial hooks
+ * \name Overridable serial bus hooks
*
* These can be redefined in hw.h to implement
* special bus policies such as half-duplex, 485, etc.
#endif
+/*!
+ * \def CONFIG_SER_STROBE
+ *
+ * This is a debug facility that can be used to
+ * monitor SER interrupt activity on an external pin.
+ *
+ * To use strobes, redefine the macros SER_STROBE_ON,
+ * SER_STROBE_OFF and SER_STROBE_INIT and set
+ * CONFIG_SER_STROBE to 1.
+ */
+#ifndef CONFIG_SER_STROBE
+ #define SER_STROBE_ON do {/*nop*/} while(0)
+ #define SER_STROBE_OFF do {/*nop*/} while(0)
+ #define SER_STROBE_INIT do {/*nop*/} while(0)
+#endif
+
+
/* From the high-level serial driver */
extern struct Serial ser_handles[SER_CNT];
+
/*!
* Internal hardware state structure
*
- * \a sending var is true if we are transmitting.
- * SPI note: this flag is necessary because the SPI sends and receives bytes
- * at the same time and the SPI IRQ is unique for send/receive.
- * The only way to start transmission is to write data in SPDR (this
- * is done by spi_starttx()). We do this *only* if a transfer is
- * not already started.
+ * The \a sending variable is true while the transmission
+ * interrupt is retriggering itself.
*
* For the USARTs the \a sending flag is useful for taking specific
* actions before sending a burst of data, at the start of a trasmission
* but not before every char sent.
+ *
+ * For the SPI, this flag is necessary because the SPI sends and receives
+ * bytes at the same time and the SPI IRQ is unique for send/receive.
+ * The only way to start transmission is to write data in SPDR (this
+ * is done by spi_starttx()). We do this *only* if a transfer is
+ * not already started.
*/
struct AvrSerial
{
volatile bool sending;
};
+
/*
* These are to trick GCC into *not* using
* absolute addressing mode when accessing
#endif
UBRR0L = (period);
- DB(kprintf("uart0_setbaudrate(rate=%lu): period=%d\n", rate, period);)
+ //DB(kprintf("uart0_setbaudrate(rate=%lu): period=%d\n", rate, period);)
}
static void uart0_setparity(UNUSED(struct SerialHardware *, _hw), int parity)
UBRR1H = (period) >> 8;
UBRR1L = (period);
- DB(kprintf("uart1_setbaudrate(rate=%ld): period=%d\n", rate, period);)
+ //DB(kprintf("uart1_setbaudrate(rate=%ld): period=%d\n", rate, period);)
}
static void uart1_setparity(UNUSED(struct SerialHardware *, _hw), int parity)
{
// Disable rx interrupt and tx, enable CTS interrupt
// UNTESTED
- UCSR0B = BV(RXCIE) | BV(RXEN);
+ UCSR0B = BV(RXCIE) | BV(RXEN) | BV(TXEN);
sbi(EIFR, EIMSKB_CTS);
sbi(EIMSK, EIMSKB_CTS);
}
{
// Disable rx interrupt and tx, enable CTS interrupt
// UNTESTED
- UCSR1B = BV(RXCIE) | BV(RXEN);
+ UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN);
sbi(EIFR, EIMSKB_CTS);
sbi(EIMSK, EIMSKB_CTS);
}