# piped commands should return the code of the first non-zero return
set -o pipefail
+# make sure the TESTDIR is an absolute path, not a relative one.
+export TESTDIR=$(cd $(dirname "$0") && pwd)
+
+source "$TESTDIR"/common
+
## make sure that the right tools are installed to run the test. the
## test has *more* requirements than plain ol' monkeysphere:
-which socat || { echo "You must have socat installed to run this test." ; exit 1; }
+which socat >/dev/null || { echo "You must have socat installed to run this test." ; exit 1; }
## FIXME: other checks?
+######################################################################
+### FUNCTIONS
+
# gpg command for test admin user
gpgadmin() {
+ chmod 0700 "$TEMPDIR"/admin
GNUPGHOME="$TEMPDIR"/admin/.gnupg gpg "$@"
}
fi
}
-failed_cleanup() {
- # FIXME: can we be more verbose here?
- echo 'FAILED!'
- read -p "press enter to cleanup and remove tmp:"
-
- cleanup
-}
-
-get_gpg_prng_arg() {
- if (gpg --quick-random --version >/dev/null 2>&1) ; then
- echo quick-random
- elif (gpg --debug-quick-random --version >/dev/null 2>&1) ; then
- echo debug-quick-random
- fi
-}
-
-cleanup() {
- echo "### removing temp dir..."
- rm -rf "$TEMPDIR"
-
- if [ "$SSHD_PID" ] ; then
- echo "### killing off lingering sshd..."
- kill "$SSHD_PID"
- fi
-
- wait
-}
-
SSHD_PID=
## setup trap
trap failed_cleanup EXIT
+######################################################################
### SETUP VARIABLES
+
## set up some variables to ensure that we're operating strictly in
## the tests, not system-wide:
-export TESTDIR=$(pwd)
-
# make temp dir
-TEMPDIR="$TESTDIR"/tmp
-if [ -e "$TEMPDIR" ] ; then
- echo "tempdir '$TEMPDIR' already exists."
- exit 1
-fi
-mkdir "$TEMPDIR"
+# FIXME: I believe that /tmp can not be used as the temp dir here,
+# since the permissions on /tmp are usually such that they will not
+# pass the monkeysphere/ssh path permission checking. at least this
+# is my experience.
+#TEMPDIR=$(mktemp -d "${TMPDIR:-$TESTDIR/tmp}/monkeyspheretest.XXXXXXX")
+TEMPDIR=$(mktemp -d "${TESTDIR}/tmp/monkeyspheretest.XXXXXXX")
# Use the local copy of executables first, instead of system ones.
# This should help us test without installing.
export MONKEYSPHERE_SYSDATADIR="$TEMPDIR"
export MONKEYSPHERE_SYSCONFIGDIR="$TEMPDIR"
-export MONKEYSPHERE_SYSSHAREDIR="$TESTDIR"/../src
+export MONKEYSPHERE_SYSSHAREDIR="$TESTDIR"/../src/share
export MONKEYSPHERE_MONKEYSPHERE_USER=$(whoami)
export MONKEYSPHERE_CHECK_KEYSERVER=false
export MONKEYSPHERE_LOG_LEVEL=DEBUG
+export MONKEYSPHERE_CORE_KEYLENGTH=1024
export SSHD_CONFIG="$TEMPDIR"/sshd_config
export SOCKET="$TEMPDIR"/ssh-socket
# *anything* with any running X11 session.
export DISPLAY=monkeys
+
+######################################################################
### CONFIGURE ENVIRONMENTS
# copy in admin and testuser home to tmp
-echo "### copying admin and testuser homes..."
-cp -a "$TESTDIR"/home/admin "$TEMPDIR"/
+echo "##################################################"
+echo "### configuring testuser home..."
cp -a "$TESTDIR"/home/testuser "$TEMPDIR"/
-
# set up environment for testuser
-TESTHOME="$TEMPDIR"/testuser
+export TESTHOME="$TEMPDIR"/testuser
export GNUPGHOME="$TESTHOME"/.gnupg
+chmod 0700 "$GNUPGHOME"
export SSH_ASKPASS="$TESTHOME"/.ssh/askpass
export MONKEYSPHERE_HOME="$TESTHOME"/.monkeysphere
cat <<EOF >> "$TESTHOME"/.ssh/config
EOF
get_gpg_prng_arg >> "$GNUPGHOME"/gpg.conf
+echo "##################################################"
+echo "### configuring admin home..."
+cp -a "$TESTDIR"/home/admin "$TEMPDIR"/
+
# set up sshd
+echo "##################################################"
echo "### configuring sshd..."
-cp etc/ssh/sshd_config "$SSHD_CONFIG"
+cp "$TESTDIR"/etc/ssh/sshd_config "$SSHD_CONFIG"
# write the sshd_config
cat <<EOF >> "$SSHD_CONFIG"
HostKey ${MONKEYSPHERE_SYSDATADIR}/ssh_host_rsa_key
AuthorizedKeysFile ${MONKEYSPHERE_SYSDATADIR}/authentication/authorized_keys/%u
EOF
-# set up monkeysphere-server
-echo "### configuring monkeysphere..."
-mkdir -p -m 750 "$MONKEYSPHERE_SYSDATADIR"/host
-mkdir -p -m 700 "$MONKEYSPHERE_SYSDATADIR"/authentication
-mkdir -p -m 700 "$MONKEYSPHERE_SYSDATADIR"/authentication/authorized_keys
-mkdir -p -m 700 "$MONKEYSPHERE_SYSDATADIR"/tmp
-cp etc/monkeysphere/monkeysphere-server.conf "$TEMPDIR"/monkeysphere-server.conf
-cat <<EOF >> "$TEMPDIR"/monkeysphere-server.conf
-AUTHORIZED_USER_IDS="$MONKEYSPHERE_HOME/authentication/authorized_user_ids"
-EOF
-cat <<EOF > "$MONKEYSPHERE_SYSDATADIR"/gnupg-authentication/gpg.conf
-primary-keyring ${MONKEYSPHERE_SYSDATADIR}/authentication/sphere/pubring.gpg
-keyring ${MONKEYSPHERE_SYSDATADIR}/host/pubring.gpg
-EOF
+######################################################################
+### SERVER HOST SETUP
-### SERVER TESTS
+# import host key
+echo "##################################################"
+echo "### testing host key importing..."
+ssh-keygen -b 1024 -t rsa -N '' -f "$TEMPDIR"/ssh_host_rsa_key
+monkeysphere-host expert import-key testhost < "$TEMPDIR"/ssh_host_rsa_key
-# create a new host key
-echo "### generating server key..."
-# add gpg.conf with quick-random
-get_gpg_prng_arg >> "$MONKEYSPHERE_SYSCONFIGDIR"/gnupg-host/gpg.conf
-echo | monkeysphere-host expert gen-key --length 1024 --expire 0 testhost
-# remove the gpg.conf
-rm "$MONKEYSPHERE_SYSCONFIGDIR"/gnupg-host/gpg.conf
+# change host key expiration
+echo "##################################################"
+echo "### setting host key expiration..."
+monkeysphere-host set-expire 1
+monkeysphere-host show-key
+# FIXME: how do we check that the expiration has really been set?
+echo "##################################################"
+echo "### getting host key fingerprint..."
HOSTKEYID=$( monkeysphere-host show-key | grep '^OpenPGP fingerprint: ' | cut -f3 -d\ )
+echo "$HOSTKEYID"
-# certify it with the "Admin's Key".
+# certify host key with the "Admin's Key".
# (this would normally be done via keyservers)
-echo "### certifying server key..."
-monkeysphere-authentication expert gpg-cmd "--armor --export $HOSTKEYID" | gpgadmin --import
+echo "##################################################"
+echo "### certifying server host key..."
+GNUPGHOME="$MONKEYSPHERE_SYSCONFIGDIR"/host gpg --armor --export "$HOSTKEYID" | gpgadmin --import
echo y | gpgadmin --command-fd 0 --sign-key "$HOSTKEYID"
+# FIXME: add revoker?
+
# FIXME: how can we test publish-key without flooding junk into the
# keyservers?
+# FIXME: should we run "diagnostics" here to test setup?
+
+
+######################################################################
+### SERVER AUTHENTICATION SETUP
+
+# set up monkeysphere authentication
+echo "##################################################"
+echo "### setup monkeysphere authentication..."
+cp "$TESTDIR"/etc/monkeysphere/monkeysphere-authentication.conf "$TEMPDIR"/
+cat <<EOF >> "$TEMPDIR"/monkeysphere-authentication.conf
+AUTHORIZED_USER_IDS="$MONKEYSPHERE_HOME/authorized_user_ids"
+EOF
+monkeysphere-authentication setup
+get_gpg_prng_arg >> "$MONKEYSPHERE_SYSDATADIR"/authentication/sphere/gpg.conf
+
# add admin as identity certifier for testhost
+echo "##################################################"
echo "### adding admin as certifier..."
-echo y | monkeysphere-authentication add-id-certifier "$TEMPDIR"/admin/.gnupg/pubkey.gpg
+monkeysphere-authentication add-id-certifier -y "$TEMPDIR"/admin/.gnupg/pubkey.gpg
+
+# FIXME: should we run "diagnostics" here to test setup?
-### TESTUSER TESTS
+######################################################################
+### TESTUSER SETUP
# generate an auth subkey for the test user that expires in 2 days
+echo "##################################################"
echo "### generating key for testuser..."
monkeysphere gen-subkey --expire 2
# add server key to testuser keychain
+echo "##################################################"
echo "### export server key to testuser..."
gpgadmin --armor --export "$HOSTKEYID" | gpg --import
# teach the "server" about the testuser's key
+echo "##################################################"
echo "### export testuser key to server..."
-gpg --export testuser | monkeysphere-authentication gpg-cmd --import
+gpg --export testuser | monkeysphere-authentication expert gpg-cmd --import
+
+# update authorized_keys for user
+echo "##################################################"
echo "### update server authorized_keys file for this testuser..."
monkeysphere-authentication update-users $(whoami)
+# FIXME: NOT FAILING PROPERLY FOR:
+# ms: improper group or other writability on path '/tmp'.
+
+
+######################################################################
+### TESTS
-# connect to test sshd, using monkeysphere-ssh-proxycommand to verify
+# connect to test sshd, using monkeysphere ssh-proxycommand to verify
# the identity before connection. This should work in both directions!
+echo "##################################################"
echo "### ssh connection test for success..."
ssh_test
# remove the testuser's authorized_user_ids file, update, and make
# sure that the ssh authentication FAILS
+echo "##################################################"
echo "### removing testuser authorized_user_ids and updating..."
mv "$TESTHOME"/.monkeysphere/authorized_user_ids{,.bak}
monkeysphere-authentication update-users $(whoami)
+echo "##################################################"
echo "### ssh connection test for server authentication denial..."
ssh_test 255
mv "$TESTHOME"/.monkeysphere/authorized_user_ids{.bak,}
# put improper permissions on authorized_user_ids file, update, and
# make sure ssh authentication FAILS
+echo "##################################################"
echo "### setting group writability on authorized_user_ids and updating..."
chmod g+w "$TESTHOME"/.monkeysphere/authorized_user_ids
monkeysphere-authentication update-users $(whoami)
+echo "##################################################"
echo "### ssh connection test for server authentication denial..."
ssh_test 255
chmod g-w "$TESTHOME"/.monkeysphere/authorized_user_ids
+echo "##################################################"
echo "### setting other writability on authorized_user_ids and updating..."
chmod o+w "$TESTHOME"/.monkeysphere/authorized_user_ids
monkeysphere-authentication update-users $(whoami)
+echo "##################################################"
echo "### ssh connection test for server authentication denial..."
ssh_test 255
chmod o-w "$TESTHOME"/.monkeysphere/authorized_user_ids
+# FIXME: addtest: remove admin as id-certifier and check ssh failure
+
+# FIXME: addtest: add hostname on host key
+# FIXME: addtest: revoke hostname on host key and check ssh failure
+
+# FIXME: addtest: revoke the host key and check ssh failure
+
+
+######################################################################
trap - EXIT
-echo
-echo "Monkeysphere basic tests completed successfully!"
-echo
+echo "##################################################"
+echo " Monkeysphere basic tests completed successfully!"
+echo "##################################################"
cleanup