# piped commands should return the code of the first non-zero return
set -o pipefail
-export TESTDIR=$(dirname "$0")
+# make sure the TESTDIR is an absolute path, not a relative one.
+export TESTDIR=$(cd $(dirname "$0") && pwd)
source "$TESTDIR"/common
-## setup trap
-trap failed_cleanup EXIT
+perl -MCrypt::OpenSSL::RSA -e 1 2>/dev/null || { echo "You must have the perl module Crypt::OpenSSL::RSA installed to run this test.
+On debian-derived systems, you can set this up with:
+ apt-get install libcrypt-openssl-rsa-perl" ; exit 1; }
+
+perl -MDigest::SHA -e 1 2>/dev/null || { echo "You must have the perl module Digest::SHA installed to run this test.
+On debian-derived systems, you can set this up with:
+ apt-get install libdigest-sha1-perl" ; exit 1; }
+
######################################################################
### SETUP VARIABLES
## set up some variables to ensure that we're operating strictly in
## the tests, not system-wide:
-# make temp dir
-TEMPDIR="$TESTDIR"/tmp
-if [ -e "$TEMPDIR" ] ; then
- echo "tempdir '$TEMPDIR' already exists."
- exit 1
-fi
-mkdir -p "$TEMPDIR"
+mkdir -p "$TESTDIR"/tmp
+TEMPDIR=$(mktemp -d "${TMPDIR:-$TESTDIR/tmp}/monkeyspheretest.XXXXXXX")
+
+mkdir "$TEMPDIR"/bin
+ln -s "$TESTDIR"/../src/share/keytrans "$TEMPDIR"/bin/openpgp2ssh
+ln -s "$TESTDIR"/../src/share/keytrans "$TEMPDIR"/bin/pem2openpgp
+ln -s "$TESTDIR"/../src/share/keytrans "$TEMPDIR"/bin/keytrans
# Use the local copy of executables first, instead of system ones.
# This should help us test without installing.
-export PATH="$TESTDIR"/../src/keytrans:"$PATH"
+export PATH="$TEMPDIR"/bin:"$PATH"
+
+## setup trap
+trap failed_cleanup EXIT
######################################################################
### TEST KEYTRANS
echo "### generating openpgp key..."
export GNUPGHOME="$TEMPDIR"
chmod 700 "$TEMPDIR"
+
+
+# create the key with the same preferences that monkeysphere uses.
+cat > "$TEMPDIR"/gpg.conf <<EOF
+default-preference-list SHA512 SHA384 SHA256 SHA224 RIPEMD160 SHA1 ZLIB BZIP2 ZIP AES256 AES192 AES CAST5 3DES
+cert-digest-algo SHA256
+list-options show-uid-validity,show-unusable-uids
+EOF
+
# generate a key
gpg --batch --$(get_gpg_prng_arg) --gen-key <<EOF
Key-Type: RSA
gpg --export-secret-key | openpgp2ssh > \
"$TEMPDIR"/test.pem
+gpg --export-secret-key > "$TEMPDIR"/secret.key
+
+PEM2OPENPGP_USAGE_FLAGS=sign,certify \
+PEM2OPENPGP_TIMESTAMP="$timestamp" pem2openpgp testtest \
+ < "$TEMPDIR"/test.pem > "$TEMPDIR"/converted.secret.key
+
echo "##################################################"
echo "### reconvert key, and compare to key in gpg keyring..."
diff -u \
- <(gpg --export-secret-key | hd) \
- <(PEM2OPENPGP_USAGE_FLAGS=sign,certify \
- PEM2OPENPGP_TIMESTAMP="$timestamp" pem2openpgp testtest < \
- "$TEMPDIR"/test.pem | hd )
+ <(gpg --list-packets < "$TEMPDIR"/secret.key) \
+ <(gpg --list-packets < "$TEMPDIR"/converted.secret.key)
+
+diff -u \
+ <(hd "$TEMPDIR"/secret.key) \
+ <(hd "$TEMPDIR"/converted.secret.key)
+
+KEYFPR=$(gpg --fingerprint --with-colons --list-keys | grep ^fpr | cut -f10 -d:)
+KEYID=$(printf "%s" "$KEYFPR" | cut -b25-40)
+
+echo "conversions look good!"
+
+echo "Now working with key $KEYID at time $timestamp"
+
+gpg --check-trustdb
+gpg --list-keys
+
+
+echo "##################################################"
+echo "### test User ID addition..."
+< "$TEMPDIR"/secring.gpg \
+PEM2OPENPGP_TIMESTAMP="$timestamp" \
+ PEM2OPENPGP_USAGE_FLAGS=sign,certify \
+ keytrans adduserid "$KEYID" "monkeymonkey" | gpg --import
+
+gpg --check-trustdb
+gpg --list-keys
+
+cat >"$TEMPDIR"/expectedout <<EOF
+pub:u:1024:1:$KEYID:$timestamp:::u:::scSC:
+uid:u::::$timestamp::E90EC72E68C6C2A0751DADC70F54F60D27B88C3D::monkeymonkey:
+sig:!::1:$KEYID:$timestamp::::monkeymonkey:13x:
+uid:u::::$timestamp::8200BD0425CC70C7D698DF3FE412044EAAB83F94::testtest:
+sig:!::1:$KEYID:$timestamp::::monkeymonkey:13x:
+EOF
+
+diff -u "$TEMPDIR"/expectedout <(gpg --check-sigs --with-colons --fixed-list-mode | grep -v ^tru)
+
+echo "##################################################"
+echo "### test User ID revocation ... "
+
+revtime=$(($timestamp + 1))
+
+< "$TEMPDIR"/secring.gpg \
+PEM2OPENPGP_TIMESTAMP="$revtime" \
+ keytrans revokeuserid "$KEYID" "testtest" | gpg --import
+
+gpg --check-trustdb
+gpg --list-keys
+
+cat >"$TEMPDIR"/expectedout <<EOF
+pub:u:1024:1:$KEYID:$timestamp:::u:::scSC:
+uid:u::::$timestamp::E90EC72E68C6C2A0751DADC70F54F60D27B88C3D::monkeymonkey:
+sig:!::1:$KEYID:$timestamp::::monkeymonkey:13x:
+uid:r::::::8200BD0425CC70C7D698DF3FE412044EAAB83F94::testtest:
+sig:!::1:$KEYID:$timestamp::::monkeymonkey:13x:
+rev:!::1:$KEYID:$revtime::::monkeymonkey:30x:
+EOF
+
+
+diff -u "$TEMPDIR"/expectedout <(gpg --check-sigs --with-colons --fixed-list-mode | grep -v ^tru)
+
+
+echo "##################################################"
+echo "### test working with two primary keys ... "
+
+ssh-keygen -t rsa -b 1024 -N '' -f "$TEMPDIR"/newkey
+
+PEM2OPENPGP_USAGE_FLAGS=authenticate,certify \
+PEM2OPENPGP_TIMESTAMP="$(( $timestamp + 1 ))" pem2openpgp fubar \
+ < "$TEMPDIR"/newkey > "$TEMPDIR"/newkey.gpg
+
+NEWKEYFPR=$(< "$TEMPDIR"/newkey.gpg keytrans listfprs)
+NEWKEYID=$( printf "%s" "$NEWKEYFPR" | cut -b25-40)
+
+< "$TEMPDIR"/newkey.gpg gpg --import
+
+< "$TEMPDIR"/secring.gpg \
+PEM2OPENPGP_TIMESTAMP="$timestamp" \
+ keytrans adduserid "$KEYID" "baz" | gpg --import
+
+cat >"$TEMPDIR"/expectedout <<EOF
+pub:u:1024:1:$KEYID:$timestamp:::u:::scSC:
+uid:u::::$timestamp::E90EC72E68C6C2A0751DADC70F54F60D27B88C3D::monkeymonkey:
+sig:!::1:$KEYID:$timestamp::::monkeymonkey:13x:
+uid:r::::::8200BD0425CC70C7D698DF3FE412044EAAB83F94::testtest:
+sig:!::1:$KEYID:$timestamp::::monkeymonkey:13x:
+rev:!::1:$KEYID:$revtime::::monkeymonkey:30x:
+uid:u::::$timestamp::EDDC32D783E7F4C7B6982D9AE5DC4A61000648BA::baz:
+sig:!::1:$KEYID:$timestamp::::monkeymonkey:13x:
+pub:-:1024:1:$NEWKEYID:$(($timestamp + 1)):::-:::caCA:
+uid:-::::$(($timestamp + 1))::A0D708F51CC257DEFC01AEDE1E0A5F329DFD8F16::fubar:
+sig:!::1:$NEWKEYID:$(($timestamp + 1))::::fubar:13x:
+EOF
+
+echo "test: diff expected gpg list output"
+diff -u "$TEMPDIR"/expectedout <(gpg --check-sigs --with-colons --fixed-list-mode | grep -v ^tru)
+
+sort >"$TEMPDIR"/expectedout <<EOF
+$KEYFPR
+$NEWKEYFPR
+EOF
+
+echo "test: diff expected keytrans listfpr output"
+diff -u "$TEMPDIR"/expectedout <( < "$TEMPDIR"/secring.gpg keytrans listfprs | sort )
+
+## FIXME: addtest: not testing subkeys at the moment.
+
trap - EXIT