-#include <cfg/macros.h> /* BV() */
-#include <cfg/compiler.h> /* uint32_t */
-
-typedef uint8_t serstatus_t;
-
-/* Software errors */
-#define SERRF_RXFIFOOVERRUN BV(0) /**< Rx FIFO buffer overrun */
-#define SERRF_RXTIMEOUT BV(5) /**< Receive timeout */
-#define SERRF_TXTIMEOUT BV(6) /**< Transmit timeout */
-
-/*
-* Hardware errors.
-* These flags map directly to the AVR UART Status Register (USR).
-*/
-#define SERRF_RXSROVERRUN BV(3) /**< Rx shift register overrun */
-#define SERRF_FRAMEERROR BV(4) /**< Stop bit missing */
-#define SERRF_PARITYERROR BV(7) /**< Parity error */
-#define SERRF_NOISEERROR 0 /**< Unsupported */
-
-
-/**
- * SPI clock polarity.
- *
- * $WIZ$ ser_spi_pol = "SPI_NORMAL_LOW", "SPI_NORMAL_HIGH"
- * }
- */
-#define SPI_NORMAL_LOW 0
-#define SPI_NORMAL_HIGH 1
-
-/**
- * SPI clock phase.
- *
- * $WIZ$ ser_spi_phase = "SPI_SAMPLE_ON_FIRST_EDGE", "SPI_SAMPLE_ON_SECOND_EDGE"
- * }
- */
-#define SPI_SAMPLE_ON_FIRST_EDGE 0
-#define SPI_SAMPLE_ON_SECOND_EDGE 1
-
-/**
- * \name Serial hw numbers
- *
- * \{
- */
-enum
-{
-#if CPU_AVR_ATMEGA1280
- SER_UART0,
- SER_UART1,
- SER_UART2,
- SER_UART3,
- SER_SPI,
-#elif CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA1281
- SER_UART0,
- SER_UART1,
- SER_SPI,
-#elif CPU_AVR_ATMEGA103 || CPU_AVR_ATMEGA8 || CPU_AVR_ATMEGA32 || CPU_AVR_ATMEGA168 \
- || CPU_AVR_ATMEGA328P
- SER_UART0,
- SER_SPI,