-
- #define REG_TIMSK0 TIMSK0
- #define REG_TIMSK1 TIMSK1
- #define REG_TIMSK2 TIMSK2
- #if CPU_AVR_ATMEGA1281 || CPU_AVR_ATMEGA1280
- #define REG_TIMSK3 TIMSK3
- #endif
-
- #define REG_TCCR0A TCCR0A
- #define REG_TCCR0B TCCR0B
-
- #define REG_TCCR2A TCCR2A
- #define REG_TCCR2B TCCR2B
-
- #define REG_OCR0A OCR0A
- #define REG_OCR2A OCR2A
-
- #define BIT_OCF0A OCF0A
- #define BIT_OCF2A OCF2A
-
- #define BIT_OCIE0A OCIE0A
- #define BIT_OCIE2A OCIE2A
-#else
- #define REG_TIFR0 TIFR
- #define REG_TIFR1 TIFR
- #define REG_TIFR2 TIFR
- #define REG_TIFR3 TIFR
-
- #define REG_TIMSK0 TIMSK
- #define REG_TIMSK1 TIMSK
- #define REG_TIMSK2 TIMSK
- #define REG_TIMSK3 ETIMSK
-
- #define REG_TCCR0A TCCR0
- #define REG_TCCR0B TCCR0
-
- #define REG_TCCR2A TCCR2
- #define REG_TCCR2B TCCR2
-
- #define REG_OCR0A OCR0
- #define REG_OCR2A OCR2
-
- #define BIT_OCF0A OCF0
- #define BIT_OCF2A OCF2
-
- #define BIT_OCIE0A OCIE0
- #define BIT_OCIE2A OCIE2
-#endif
-
-#if CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA103
- /* These ATMega have different prescaler options. */
- #define TIMER0_PRESCALER_64 BV(CS02)
- #define TIMER2_PRESCALER_64 (BV(CS21) | BV(CS20))
-#else
- #define TIMER0_PRESCALER_64 (BV(CS01) | BV(CS00))
- #define TIMER2_PRESCALER_64 BV(CS22)
-#endif
-
-/** HW dependent timer initialization */
-#if (CONFIG_TIMER == TIMER_ON_OUTPUT_COMPARE0)
-
- void timer_hw_init(void)
- {
- cpu_flags_t flags;
- IRQ_SAVE_DISABLE(flags);
-
- /* Reset Timer flags */
- REG_TIFR0 = BV(BIT_OCF0A) | BV(TOV0);
-
- /* Setup Timer/Counter interrupt */
- ASSR = 0x00; /* Internal system clock */
-
- REG_TCCR0A = 0; // TCCR2 reg could be separate or a unique register with both A & B values, this is needed to
- REG_TCCR0B = 0;
-
- REG_TCCR0A = BV(WGM01); /* Clear on Compare match */
- #if TIMER_PRESCALER == 64
- REG_TCCR0B |= TIMER0_PRESCALER_64;
- #else
- #error Unsupported value of TIMER_PRESCALER
- #endif
-
- TCNT0 = 0x00; /* Initialization of Timer/Counter */
- REG_OCR0A = OCR_DIVISOR; /* Timer/Counter Output Compare Register */
-
- /* Enable timer interrupts: Timer/Counter2 Output Compare (OCIE2) */
- REG_TIMSK0 &= ~BV(TOIE0);
- REG_TIMSK0 |= BV(BIT_OCIE0A);
-
- IRQ_RESTORE(flags);
- }
-
-#elif (CONFIG_TIMER == TIMER_ON_OVERFLOW1)
-
- void timer_hw_init(void)
- {
- cpu_flags_t flags;
- IRQ_SAVE_DISABLE(flags);
-
- /* Reset Timer overflow flag */
- REG_TIFR1 |= BV(TOV1);
-
- /* Fast PWM mode, 9 bit, 24 kHz, no prescaling. */
- #if (TIMER_PRESCALER == 1) && (TIMER_HW_BITS == 9)
- TCCR1A |= BV(WGM11);
- TCCR1A &= ~BV(WGM10);
- TCCR1B |= BV(WGM12) | BV(CS10);
- TCCR1B &= ~(BV(WGM13) | BV(CS11) | BV(CS12));
- /* Fast PWM mode, 8 bit, 24 kHz, no prescaling. */
- #elif (TIMER_PRESCALER == 1) && (TIMER_HW_BITS == 8)
- TCCR1A |= BV(WGM10);
- TCCR1A &= ~BV(WGM11);
- TCCR1B |= BV(WGM12) | BV(CS10);
- TCCR1B &= ~(BV(WGM13) | BV(CS11) | BV(CS12));
- #else
- #error Unsupported value of TIMER_PRESCALER or TIMER_HW_BITS
- #endif
-
- TCNT1 = 0x00; /* initialization of Timer/Counter */
-
- /* Enable timer interrupt: Timer/Counter1 Overflow */
- REG_TIMSK1 |= BV(TOIE1);
-
- IRQ_RESTORE(flags);
- }
-
-#elif (CONFIG_TIMER == TIMER_ON_OUTPUT_COMPARE2)
- void timer_hw_init(void)
- {
- cpu_flags_t flags;
- IRQ_SAVE_DISABLE(flags);
-
- /* Reset Timer flags */
- REG_TIFR2 = BV(BIT_OCF2A) | BV(TOV2);
-
- /* Setup Timer/Counter interrupt */
- REG_TCCR2A = 0; // TCCR2 reg could be separate or a unique register with both A & B values, this is needed to
- REG_TCCR2B = 0; // ensure correct initialization.
-
- REG_TCCR2A = BV(WGM21);
- #if TIMER_PRESCALER == 64
- REG_TCCR2B |= TIMER2_PRESCALER_64;
- #else
- #error Unsupported value of TIMER_PRESCALER
- #endif
-
- /* Clear on Compare match & prescaler = 64, internal sys clock.
- When changing prescaler change TIMER_HW_HPTICKS_PER_SEC too */
- TCNT2 = 0x00; /* initialization of Timer/Counter */
- REG_OCR2A = (uint8_t)OCR_DIVISOR; /* Timer/Counter Output Compare Register */
-
- /* Enable timer interrupts: Timer/Counter2 Output Compare (OCIE2) */
- REG_TIMSK2 &= ~BV(TOIE2);
- REG_TIMSK2 |= BV(BIT_OCIE2A);
-
- IRQ_RESTORE(flags);
- }
-
-#elif (CONFIG_TIMER == TIMER_ON_OVERFLOW3)
-
- #if CPU_AVR_ATMEGA168 || CPU_AVR_ATMEGA328P || CPU_AVR_ATMEGA32
- #error For select target there is not TIMER_ON_OVERFLOW3, please select an other one.
- #endif
-
- void timer_hw_init(void)
- {
- cpu_flags_t flags;
- IRQ_SAVE_DISABLE(flags);
-
- /* Reset Timer overflow flag */
- REG_TIFR3 |= BV(TOV3);
-
- /* Fast PWM mode, 9 bit, 24 kHz, no prescaling. */
- #if (TIMER_PRESCALER == 1) && (TIMER_HW_BITS == 9)
- TCCR3A |= BV(WGM31);
- TCCR3A &= ~BV(WGM30);
- TCCR3B |= BV(WGM32) | BV(CS30);
- TCCR3B &= ~(BV(WGM33) | BV(CS31) | BV(CS32));
- /* Fast PWM mode, 8 bit, 24 kHz, no prescaling. */
- #elif (TIMER_PRESCALER == 1) && (TIMER_HW_BITS == 8)
- TCCR3A |= BV(WGM30);
- TCCR3A &= ~BV(WGM31);
- TCCR3B |= BV(WGM32) | BV(CS30);
- TCCR3B &= ~(BV(WGM33) | BV(CS31) | BV(CS32));
- #else
- #error Unsupported value of TIMER_PRESCALER or TIMER_HW_BITS
- #endif
-
- /* initialization of Timer/Counter */
- TCNT3 = 0x00;
-
- /* Enable timer interrupt: Timer/Counter3 Overflow */
- REG_TIMSK3 |= BV(TOIE3);
-
- IRQ_RESTORE(flags);
- }
-
-#else
- #error Unimplemented value for CONFIG_TIMER
-#endif /* CONFIG_TIMER */