+/*!
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2004, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 1999, 2000, 2001 Bernie Innocenti <bernie@codewiz.org>
+ * -->
+ *
+ * \version $Id$
+ * \author Bernie Innocenti <bernie@codewiz.org>
+ * \author Stefano Fedrigo <aleph@develer.com>
+ *
+ * \brief AVR context switch
+ *
+ */
+
+#include <avr/io.h>
+
+/* void asm_switch_context(void **new_sp [r24:r25], void **save_sp [r22:r23]) */
+.globl asm_switch_context
+asm_switch_context:
+
+; r0 is the TEMP REG and can be used freely.
+; r1 is the ZERO REG and must always contain 0.
+;
+; Stack frame is 19 byte, remember to update
+; CPU_SAVED_REGS_CNT if you change pushed regs.
+
+ in r0,SREG-__SFR_OFFSET
+ push r0
+; push r1 ;zero-reg
+ push r2
+ push r3
+ push r4
+ push r5
+ push r6
+ push r7
+ push r8
+ push r9
+ push r10
+ push r11
+ push r12
+ push r13
+ push r14
+ push r15
+ push r16
+ push r17
+; push r18 ;caller-save
+; push r19 ;caller-save
+; push r20 ;caller-save
+; push r21 ;caller-save
+; push r22 ;caller-save
+; push r23 ;caller-save
+; push r24 ;caller-save
+; push r25 ;caller-save
+; push r26 ;caller-save
+; push r27 ;caller-save
+ push r28
+ push r29
+; push r30 ;caller-save
+; push r31 ;caller-save
+
+ in r18,SPL-__SFR_OFFSET ; r18:r19 = SP
+ in r19,SPH-__SFR_OFFSET
+ movw r26,r22 ; X = save_sp
+ st X+,r18 ; *save_sp = SP
+ st X,r19
+ movw r26,r24 ; X = new_sp
+ ld r18,X+
+ ld r19,X
+
+; Set new stack pointer.
+; AVR is an 8 bit processor so
+; care must be taken when updating
+; SP that is a 16 bit reg.
+; Two instructions are required to update SP
+; so an IRQ can sneak in between them.
+; So IRQ *MUST* be disabled and then restored.
+ cli ; Disable interrupt
+ out SPL-__SFR_OFFSET,r18 ; SP = *new_sp
+ out SPH-__SFR_OFFSET,r19
+ out SREG-__SFR_OFFSET,r0 ; Restore previous IRQ state
+
+; pop r31 ;caller-save
+; pop r30 ;caller-save
+ pop r29
+ pop r28
+; pop r27 ;caller-save
+; pop r26 ;caller-save
+; pop r25 ;caller-save
+; pop r24 ;caller-save
+; pop r23 ;caller-save
+; pop r22 ;caller-save
+; pop r21 ;caller-save
+; pop r20 ;caller-save
+; pop r19 ;caller-save
+; pop r18 ;caller-save
+ pop r17
+ pop r16
+ pop r15
+ pop r14
+ pop r13
+ pop r12
+ pop r11
+ pop r10
+ pop r9
+ pop r8
+ pop r7
+ pop r6
+ pop r5
+ pop r4
+ pop r3
+ pop r2
+; pop r1 ;zero-reg
+ pop r0
+ out SREG-__SFR_OFFSET,r0
+
+ ret