-/*!
- * \file
- * <!--
- * Copyright 2003,2004 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2000 Bernardo Innocenti <bernie@develer.com>
- * This file is part of DevLib - See devlib/README for information.
- * -->
- *
- * \version $Id$
- *
- * \author Bernardo Innocenti <bernie@develer.com>
- *
- * \brief Hardware independent timer driver (implementation)
- */
-
-/*
- * $Log$
- * Revision 1.4 2004/06/06 18:25:44 bernie
- * Rename event macros to look like regular functions.
- *
- * Revision 1.3 2004/06/06 17:18:42 bernie
- * Fix \!CONFIG_KERN_SIGNALS code paths.
- *
- * Revision 1.2 2004/06/03 11:27:09 bernie
- * Add dual-license information.
- *
- * Revision 1.1 2004/05/23 18:23:30 bernie
- * Import drv/timer module.
- *
- */
-
-#include "hw.h"
-#include "kdebug.h"
-#include "timer.h"
-
-#ifdef CONFIG_KERN_SIGNALS
-#include <kern/proc.h>
-#endif
-
-#if (ARCH & ARCH_EMUL)
-
-# error To be recoded
-
-#elif defined(__AVR__)
-# include "timer_avr.h"
-#elif defined(__IAR_SYSTEMS_ICC) || defined(__IAR_SYSTEMS_ICC__) /* 80C196 */
-# include "timer_i196.h"
-#elif defined (__m56800__)
-# include "timer_dsp56k.h"
-#else
-# error Unknown system
-#endif
-
-
-/*! Number of available timers */
-#define MAX_TIMERS 4
-
-
-//! Master system clock (1ms accuracy)
-volatile time_t _clock;
-
-static Timer soft_timers[MAX_TIMERS]; /*!< Pool of Timer structures */
-static List timers_pool; /*!< Pool of free timers */
-REGISTER static List timers_queue; /*!< Active timers */
-
-
-/*!
- * Return a new timer picking and removing it from the available
- * timers pool. Return NULL if no more timers are available.
- */
-Timer *timer_new(void)
-{
- Timer *timer;
- cpuflags_t flags;
-
- DISABLE_IRQSAVE(flags);
-
- /* Should never happen */
- if (ISLISTEMPTY(&timers_pool))
- {
- ENABLE_IRQRESTORE(flags);
- DB(kprintf("Tmrspool empty\n");)
- return NULL;
- }
-
- /* Get a timer from the free pool */
- timer = (Timer *)timers_pool.head;
- REMOVE((Node *)timer);
-
- ENABLE_IRQRESTORE(flags);
-
- return timer;
-}
-
-
-/*!
- * Delete a timer, putting it in the available timers queue.
- */
-void timer_delete(Timer *timer)
-{
- cpuflags_t flags;
- DISABLE_IRQSAVE(flags);
- ADDHEAD(&timers_pool, &timer->link);
- ENABLE_IRQRESTORE(flags);
-}
-
-
-/*!
- * Add the specified timer to the software timer service queue.
- * When the delay indicated by the timer expires, the timer
- * device will execute the event associated with it.
- *
- * \note Interrupt safe
- */
-void timer_add(Timer *timer)
-{
- Timer *node;
- cpuflags_t flags;
-
- DISABLE_IRQSAVE(flags);
-
- /* Calculate expiration time for this timer */
- timer->tick = _clock + timer->delay;
-
- /* Search for the first node whose expiration time is
- * greater than the timer we want to add.
- */
- node = (Timer *)timers_queue.head;
- while (node->link.succ)
- {
- /* Stop just after the insert point */
- if (node->tick > timer->tick)
- break;
-
- /* Go to next node */
- node = (Timer *)node->link.succ;
- }
-
- /* Enqueue timer request into the list */
- INSERTBEFORE((Node *)timer, (Node *)node);
-
- ENABLE_IRQRESTORE(flags);
-}
-
-
-/*!
- * Remove a timer from the timer queue before it has expired
- */
-Timer *timer_abort(Timer *timer)
-{
- cpuflags_t flags;
- DISABLE_IRQSAVE(flags);
- REMOVE((Node *)timer);
- ENABLE_IRQRESTORE(flags);
-
- return timer;
-}
-
-
-/*!
- * Wait for the specified amount of time (expressed in ms)
- */
-void timer_delay(time_t time)
-{
-#if defined(CONFIG_KERN_SIGNALS) && CONFIG_KERN_SIGNALS
- Timer t;
-
- ASSERT(!sig_check(SIG_SINGLE));
- timer_set_event_signal(&t, proc_current(), SIG_SINGLE);
- timer_set_delay(&t, time);
- timer_add(&t);
- sig_wait(SIG_SINGLE);
-
-#else /* !CONFIG_KERN_SIGNALS */
-
- time_t start = timer_gettick();
-
- /* Busy wait */
- while (timer_gettick() - start < time) { /* nop */ }
-
-#endif /* !CONFIG_KERN_SIGNALS */
-}
-
-
-/*!
- * Wait for the specified amount of time (expressed in microseconds)
- */
-void timer_udelay(utime_t usec_delay)
-{
- if (usec_delay > 1000)
- {
- timer_delay(usec_delay / 1000);
- usec_delay %= 1000;
- }
-
- // FIXME: This multiplication is too slow at run-time. We should try and move it
- // to compile-time by exposing the TIMER_HW_HPTICKS_PER_SEC in the header
- // file.
- hptime_t start = timer_hw_hpread();
- hptime_t delay = (uint32_t)usec_delay * TIMER_HW_HPTICKS_PER_SEC / 1000000ul;
-
- while (timer_hw_hpread() - start < delay)
- {}
-}
-
-
-/*!
- * Timer interrupt handler. Find soft timers expired and
- * trigger corresponding events.
- */
-DEFINE_TIMER_ISR
-{
- /* With the Metrowerks compiler, the only way to force the compiler generate
- an interrupt service routine is to put a pragma directive within the function
- body. */
- #ifdef __MWERKS__
- #pragma interrupt saveall
- #endif
-
- Timer *timer;
-
- timer_hw_irq();
-
- /* Update the master ms counter */
- ++_clock;
-
- /*
- * Check the first timer request in the list and process
- * it when it has expired. Repeat this check until the
- * first node has not yet expired. Since the list is sorted
- * by expiry time, all the following requests are guaranteed
- * to expire later.
- */
- while ((timer = (Timer *)timers_queue.head)->link.succ)
- {
- /* This request in list has not yet expired? */
- if (_clock < timer->tick)
- break;
-
- /* Retreat the expired timer */
- REMOVE((Node *)timer);
-
- /* Execute the associated event */
- event_doIntr(&timer->expire);
- }
-}
-
-
-
-/*!
- * Initialize timer
- */
-void timer_init(void)
-{
- int i;
-
- INITLIST(&timers_queue);
- INITLIST(&timers_pool);
-
- /* Init all software timers in the free pool */
- for (i = 0; i < MAX_TIMERS; i++)
- ADDTAIL(&timers_pool, (Node *)&soft_timers[i]);
-
- _clock = 0;
-
- timer_hw_init();
-}
-