-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- * \brief Virtual KFile I/O interface.
- * This module implement a standard fd.seek and a kfile
- * test function.
- *
- * \version $Id$
- * \author Francesco Sacchi <batt@develer.com>
- * \author Daniele Basile <asterix@develer.com>
- *
- */
-
-#include <kern/kfile.h>
-#include <cfg/debug.h>
-
-#include <string.h>
-
-#include <appconfig.h>
-
-/**
- * Move \a fd file seek position of \a offset bytes
- * from current position.
- * This is a generic implementation of seek function, you should redefine
- * it in your local module.
- */
-kfile_off_t kfile_seek(struct _KFile *fd, kfile_off_t offset, KSeekMode whence)
-{
- uint32_t seek_pos;
-
- switch(whence)
- {
-
- case KSM_SEEK_SET:
- seek_pos = 0;
- break;
- case KSM_SEEK_END:
- seek_pos = fd->size - 1;
- break;
- case KSM_SEEK_CUR:
- seek_pos = fd->seek_pos;
- break;
- default:
- ASSERT(0);
- return -1;
- break;
-
- }
-
- /* Bound check */
- if (seek_pos + offset > fd->size)
- {
- ASSERT(0);
- return -1;
- }
-
- fd->seek_pos = seek_pos + offset;
- kprintf("Flash seek to [%lu]\n", fd->seek_pos);
-
- return fd->seek_pos;
-}
-
-#if CONFIG_TEST
-
-/**
- * Program memory read/write subtest.
- * Try to write/read in the same \a f file location \a _size bytes.
- * \return true if all is ok, false otherwise
- * \note Restore file position at exit (if no error)
- * \note Test buffer \a buf must be filled with
- * the following statement:
- * <pre>
- * buf[i] = i & 0xff
- * </pre>
- */
-static bool kfile_rwTest(KFile *f, uint8_t *buf, size_t _size)
-{
- int32_t size = _size;
-
- // Write test buffer
- if (f->write(f, buf, size) != size)
- return false;
- f->seek(f, -size, KSM_SEEK_CUR);
-
- // Reset test buffer
- memset(buf, 0, size);
-
- // Read flash in test buffer
- if (f->read(f, buf, size) != size)
- return false;
- f->seek(f, -size, KSM_SEEK_CUR);
-
- // Check test result
- for (size_t i = 0; i < size; i++)
- if (buf[i] != (i & 0xff))
- return false;
-
- return true;
-}
-
-/**
- * Test for program memory read/write.
- * This function write and read \p test_buf long \p _size
- * on \p fd handler. If you want not overwrite exist data
- * you should pass an \p save_buf where test store exist data,
- * otherwise su must pass NULL.
- */
-bool kfile_test(uint8_t *test_buf, size_t _size , uint8_t *save_buf, size_t save_buf_size)
-{
- KFile fd;
- int32_t size = _size;
-
- /*
- * Part of test buf size that you would write.
- * This var is useded in test 3 to check fd.write
- * when write outside size limit. Normaly we want
- * perform a write until is space to write, otherwise
- * we return.
- */
- int32_t len = size/2;
-
- /*
- * Open fd handler
- */
- fd.open(&fd, NULL, 0);
- kprintf("Opened fd handler..\n");
-
- /*
- * If necessary, user could save content,
- * for later restore.
- */
- if (save_buf != NULL)
- {
- fd.read(&fd, save_buf, save_buf_size);
- kprintf("Saved content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + save_buf_size);
- }
-
- /* TEST 1 BEGIN. */
- kprintf("Test 1: write from pos 0 to [%lu]\n", fd.size);
-
- /*
- * Seek to addr 0
- */
- if (fd.seek(&fd, 0, KSM_SEEK_SET) != 0)
- goto kfile_test_end;
-
- kprintf("Seek to [%lu], expected[0]\n", fd.seek_pos);
-
- /*
- * Test flash read/write to address 0..size
- */
- if (!kfile_rwTest(&fd, test_buf, size))
- goto kfile_test_end;
-
- kprintf("Test 1: ok!\n");
-
- /*
- * Restore previous read content
- */
- if (save_buf != NULL)
- {
- fd.seek(&fd, 0, KSM_SEEK_SET);
-
- if (fd.write(&fd, save_buf, save_buf_size) != size)
- goto kfile_test_end;
-
- kprintf("Restore content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + save_buf_size);
- }
- /* TEST 1 END. */
-
- /* TEST 2 BEGIN. */
- kprintf("Test 2: write from pos [%lu] to [%lu]\n", fd.size/2 , size);
-
- /*
- * Go to half test size.
- */
- fd.seek(&fd, (fd.size/ 2), KSM_SEEK_SET);
-
- kprintf("Seek to [%lu], expected[%lu]\n", fd.seek_pos, fd.size/2);
-
- /*
- * If necessary, user could save content,
- * for later restore.
- */
- if (save_buf != NULL)
- {
- fd.read(&fd, save_buf, save_buf_size);
- fd.seek(&fd, -size, KSM_SEEK_CUR);
- kprintf("Saved content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + save_buf_size);
- }
-
- /*
- * Test flash read/write to address FLASHEND/2 ... FLASHEND/2 + size
- */
- if (!kfile_rwTest(&fd, test_buf, size))
- goto kfile_test_end;
-
- kprintf("Test 2: ok!\n");
-
- /*
- * Restore previous read content
- */
- if (save_buf != NULL)
- {
- fd.seek(&fd, -size, KSM_SEEK_CUR);
-
- if (fd.write(&fd, save_buf, save_buf_size) != size)
- goto kfile_test_end;
-
- kprintf("Restore content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + save_buf_size);
- }
-
- /* TEST 2 END. */
-
- /* TEST 3 BEGIN. */
- kprintf("Test 3: write outside of fd.size limit [%lu]\n", fd.size);
-
- /*
- * Go to the Flash end
- */
- fd.seek(&fd, -len, KSM_SEEK_END);
- kprintf("Seek to [%lu], expected[%lu]\n", fd.seek_pos, fd.size - len);
-
- /*
- * If necessary, user could save content,
- * for later restore.
- */
- if (save_buf != NULL)
- {
- ASSERT(len > save_buf_size);
-
- fd.read(&fd, save_buf, len);
- fd.seek(&fd, -len, KSM_SEEK_CUR);
- kprintf("Saved content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + len);
- }
-
- /*
- * Test flash read/write to address (FLASHEND - size) ... FLASHEND
- */
- if (!kfile_rwTest(&fd, test_buf, size))
- goto kfile_test_end;
-
- kprintf("Test 3: ok !\n");
-
- /*
- * Restore previous read content
- */
- if (save_buf != NULL)
- {
- fd.seek(&fd, -len, KSM_SEEK_END);
-
- if (fd.write(&fd, save_buf, len) != len)
- goto kfile_test_end;
-
- kprintf("Restore content..form [%lu] to [%lu]\n", fd.seek_pos, fd.seek_pos + len);
- }
-
- /* TEST 3 END. */
-
- fd.close(&fd);
- return true;
-
-kfile_test_end:
- fd.close(&fd);
- return false;
-}
-
-#endif /* CONFIG_TEST */