Add new line at the end of file.

[bertos.git] / wizard / BModulePage.py

diff --git a/wizard/BModulePage.py b/wizard/BModulePage.py
index 2a5e0a420f361dbde5545b24a7ce95a2ee4204fc..00d9d4bdcb2d46a3f9d0785b1dec2b39409c266a 100644 (file)
--- a/wizard/BModulePage.py
+++ b/wizard/BModulePage.py
@@ -4,7 +4,7 @@
 # Copyright 2009 Develer S.r.l. (http://www.develer.com/)
 # All rights reserved.
 #
 # Copyright 2009 Develer S.r.l. (http://www.develer.com/)
 # All rights reserved.
 #

-# $Id:$
+# $Id$

 #
 # Author: Lorenzo Berni <duplo@develer.com>
 #
 #
 # Author: Lorenzo Berni <duplo@develer.com>
 #


@@ -15,6 +15,7 @@ from PyQt4.QtGui import *
 from BWizardPage import *
 import bertos_utils
 
 from BWizardPage import *
 import bertos_utils
 

+from bertos_utils import SupportedException

 from DefineException import *
 from const import *
 
 from DefineException import *
 from const import *
 


@@ -27,53 +28,182 @@ class BModulePage(BWizardPage):
         BWizardPage.__init__(self, UI_LOCATION + "/module_select.ui")
         self.setTitle(self.tr("Configure the BeRTOS modules"))
         self._control_group = QControlGroup()
         BWizardPage.__init__(self, UI_LOCATION + "/module_select.ui")
         self.setTitle(self.tr("Configure the BeRTOS modules"))
         self._control_group = QControlGroup()

-        self._connectSignals()
+        ## special connection needed for the QControlGroup
+        self.connect(self._control_group, SIGNAL("stateChanged"), self.saveValue)

     
     

+    ## Overloaded BWizardPage methods ##
+
+    def setupUi(self):
+        """
+        Overload of BWizardPage setupUi method.
+        """
+        self.pageContent.moduleTree.clear()
+        self.pageContent.moduleTree.setHeaderHidden(True)
+        self.pageContent.propertyTable.horizontalHeader().setResizeMode(QHeaderView.Stretch)
+        self.pageContent.propertyTable.horizontalHeader().setVisible(False)
+        self.pageContent.propertyTable.verticalHeader().setResizeMode(QHeaderView.ResizeToContents)
+        self.pageContent.propertyTable.verticalHeader().setVisible(False)
+        self.pageContent.propertyTable.setColumnCount(2)
+        self.pageContent.propertyTable.setRowCount(0)
+        self.pageContent.moduleLabel.setVisible(False)
+        self.pageContent.warningLabel.setVisible(False)
+    
+    def connectSignals(self):
+        """
+        Overload of the BWizardPage connectSignals method.
+        """
+        self.connect(self.pageContent.moduleTree, SIGNAL("itemPressed(QTreeWidgetItem*, int)"), self.fillPropertyTable)
+        self.connect(self.pageContent.moduleTree, SIGNAL("itemChanged(QTreeWidgetItem*, int)"), self.dependencyCheck)
+        self.connect(self.pageContent.propertyTable, SIGNAL("itemSelectionChanged()"), self.showPropertyDescription)
+

     def reloadData(self):
         """
         Overload of the BWizardPage reloadData method.
         """
         QApplication.instance().setOverrideCursor(Qt.WaitCursor)
     def reloadData(self):
         """
         Overload of the BWizardPage reloadData method.
         """
         QApplication.instance().setOverrideCursor(Qt.WaitCursor)

-        self._setupUi()
-        self._loadModuleData()
-        self._fillModuleTree()
+        self.setupUi()
+        self.loadModuleData()
+        self.fillModuleTree()

         QApplication.instance().restoreOverrideCursor()
     
         QApplication.instance().restoreOverrideCursor()
     

-    def _setupButtonGroup(self):
+    ####
+    
+    ## Slots ##
+
+    def fillPropertyTable(self):
+        """
+        Slot called when the user selects a module from the module tree.
+        Fills the property table using the configuration parameters defined in
+        the source tree.
+        """
+        module = self.currentModule()
+        if module:
+            try:
+                supported = bertos_utils.isSupported(self.project(), module=module)
+            except SupportedException, e:
+                self.exceptionOccurred(self.tr("Error evaluating \"%1\" for module %2").arg(e.support_string).arg(module))
+                supported = True
+            self._control_group.clear()
+            configuration = self.projectInfo("MODULES")[module]["configuration"]
+            module_description = self.projectInfo("MODULES")[module]["description"]
+            self.pageContent.moduleLabel.setText(module_description)
+            self.pageContent.moduleLabel.setVisible(True)
+            if not supported:
+                self.pageContent.warningLabel.setVisible(True)
+                selected_cpu = self.projectInfo("CPU_NAME")
+                self.pageContent.warningLabel.setText(self.tr("<font color='#FF0000'>Warning: the selected module, \
+                    is not completely supported by the %1.</font>").arg(selected_cpu))
+            else:
+                self.pageContent.warningLabel.setVisible(False)
+            self.pageContent.propertyTable.clear()
+            self.pageContent.propertyTable.setRowCount(0)
+            if configuration != "":
+                configurations = self.projectInfo("CONFIGURATIONS")[configuration]
+                param_list = sorted(configurations["paramlist"])
+                index = 0
+                for i, property in param_list:
+                    if "type" in configurations[property]["informations"] and configurations[property]["informations"]["type"] == "autoenabled":
+                        # Doesn't show the hidden fields
+                        continue
+                    try:
+                        param_supported = bertos_utils.isSupported(self.project(), property_id=(configuration, property))
+                    except SupportedException, e:
+                        self.exceptionOccurred(self.tr("Error evaluating \"%1\" for parameter %2").arg(e.support_string).arg(property))
+                        param_supported = True
+                    if not param_supported:
+                        # Doesn't show the unsupported parameters
+                        continue
+                    # Set the row count to the current index + 1
+                    self.pageContent.propertyTable.setRowCount(index + 1)
+                    item = QTableWidgetItem(configurations[property]["brief"])
+                    item.setData(Qt.UserRole, qvariant_converter.convertString(property))
+                    self.pageContent.propertyTable.setItem(index, 0, item)
+                    if "type" in configurations[property]["informations"] and configurations[property]["informations"]["type"] == "boolean":
+                        self.insertCheckBox(index, configurations[property]["value"])
+                    elif "type" in configurations[property]["informations"] and configurations[property]["informations"]["type"] == "enum":
+                        self.insertComboBox(index, configurations[property]["value"], configurations[property]["informations"]["value_list"])
+                    elif "type" in configurations[property]["informations"] and configurations[property]["informations"]["type"] == "int":
+                        self.insertSpinBox(index, configurations[property]["value"], configurations[property]["informations"])
+                    else:
+                        # Not defined type, rendered as a text field
+                        self.pageContent.propertyTable.setItem(index, 1, QTableWidgetItem(configurations[property]["value"]))
+                    index += 1
+            if self.pageContent.propertyTable.rowCount() == 0:
+                module_label = self.pageContent.moduleLabel.text()
+                module_label += "\n\nNo configuration needed."
+                self.pageContent.moduleLabel.setText(module_label)
+
+    def dependencyCheck(self, item):
+        """
+        Checks the dependencies of the module associated with the given item.
+        """
+        checked = False
+        module = unicode(item.text(0))
+        if item.checkState(0) == Qt.Checked:
+            self.moduleSelected(module)
+        else:
+            self.moduleUnselected(module)
+            self.removeFileDependencies(module)
+
+    def showPropertyDescription(self):
+        """
+        Slot called when the property selection changes. Shows the description
+        of the selected property.

         """
         """

-        Sets up the button group.
+        self.resetPropertyDescription()
+        configurations = self.currentModuleConfigurations()
+        if self.currentProperty() in configurations:
+            description = configurations[self.currentProperty()]["brief"]
+            name = self.currentProperty()
+            self.currentPropertyItem().setText(description + "\n" + name)
+
+    def saveValue(self, index):

         """
         """

-        self._button_group = QButtonGroup()
-        self._button_group.setExclusive(False)
-        self.connect(self._button_group, SIGNAL("buttonClicked(int)"), self._moduleSelectionChanged)
+        Slot called when the user modifies one of the configuration parameters.
+        It stores the new value."""
+        property = qvariant_converter.getString(self.pageContent.propertyTable.item(index, 0).data(Qt.UserRole))
+        configuration = self.projectInfo("MODULES")[self.currentModule()]["configuration"]
+        configurations = self.projectInfo("CONFIGURATIONS")
+        if "type" not in configurations[configuration][property]["informations"] or configurations[configuration][property]["informations"]["type"] == "int":
+            configurations[configuration][property]["value"] = str(int(self.pageContent.propertyTable.cellWidget(index, 1).value()))
+        elif configurations[configuration][property]["informations"]["type"] == "enum":
+            configurations[configuration][property]["value"] = unicode(self.pageContent.propertyTable.cellWidget(index, 1).currentText())
+        elif configurations[configuration][property]["informations"]["type"] == "boolean":
+            if self.pageContent.propertyTable.cellWidget(index, 1).isChecked():
+                configurations[configuration][property]["value"] = "1"
+            else:
+                configurations[configuration][property]["value"] = "0"
+        self.setProjectInfo("CONFIGURATIONS", configurations)
+
+    ####

     
     

-    def _loadModuleData(self):
+    def loadModuleData(self):

         """
         Loads the module data.
         """
         """
         Loads the module data.
         """

-        ## Load the module data only if it isn't already loaded
-        if self._projectInfoRetrieve("MODULES") == None \
-                and self._projectInfoRetrieve("LISTS") == None \
-                and self._projectInfoRetrieve("CONFIGURATIONS") == None:
+        # Load the module data only if it isn't already loaded
+        if not self.projectInfo("MODULES") \
+                and not self.projectInfo("LISTS") \
+                and not self.projectInfo("CONFIGURATIONS"):

             try:
             try:

-                bertos_utils.loadModuleData(self._project())
+                bertos_utils.loadModuleData(self.project())

             except ModuleDefineException, e:
             except ModuleDefineException, e:

-                self._exceptionOccurred(self.tr("Error parsing line '%2' in file %1").arg(e.path).arg(e.line))
+                self.exceptionOccurred(self.tr("Error parsing line '%2' in file %1").arg(e.path).arg(e.line))

             except EnumDefineException, e:
             except EnumDefineException, e:

-                self._exceptionOccurred(self.tr("Error parsing line '%2' in file %1").arg(e.path).arg(e.line))
+                self.exceptionOccurred(self.tr("Error parsing line '%2' in file %1").arg(e.path).arg(e.line))

             except ConfigurationDefineException, e:
             except ConfigurationDefineException, e:

-                self._exceptionOccurred(self.tr("Error parsing line '%2' in file %1").arg(e.path).arg(e.line))
+                self.exceptionOccurred(self.tr("Error parsing line '%2' in file %1").arg(e.path).arg(e.line))

     
     

-    def _fillModuleTree(self):
+    def fillModuleTree(self):

         """
         Fills the module tree with the module entries separated in categories.
         """
         """
         Fills the module tree with the module entries separated in categories.
         """

-        modules = self._projectInfoRetrieve("MODULES")
-        if modules is None:
+        modules = self.projectInfo("MODULES")
+        if not modules:

             return
         categories = {}
         for module, information in modules.items():
             return
         categories = {}
         for module, information in modules.items():

-            if information["category"] not in categories.keys():
+            if information["category"] not in categories:

                 categories[information["category"]] = []
             categories[information["category"]].append(module)
         for category, module_list in categories.items():
                 categories[information["category"]] = []
             categories[information["category"]].append(module)
         for category, module_list in categories.items():


@@ -81,59 +211,21 @@ class BModulePage(BWizardPage):
             for module in module_list:
                 enabled = modules[module]["enabled"]
                 module_item = QTreeWidgetItem(item, QStringList([module]))
             for module in module_list:
                 enabled = modules[module]["enabled"]
                 module_item = QTreeWidgetItem(item, QStringList([module]))

+                try:
+                    supported = bertos_utils.isSupported(self.project(), module=module)
+                except SupportedException, e:
+                    self.exceptionOccurred(self.tr("Error evaluating \"%1\" for module %2").arg(e.support_string).arg(module))
+                    supported = True
+                if not supported:
+                    module_item.setForeground(0, QBrush(QColor(Qt.red)))

                 if enabled:
                     module_item.setCheckState(0, Qt.Checked)
                 else:
                     module_item.setCheckState(0, Qt.Unchecked)
             self.pageContent.moduleTree.addTopLevelItem(item)
         self.pageContent.moduleTree.sortItems(0, Qt.AscendingOrder)
                 if enabled:
                     module_item.setCheckState(0, Qt.Checked)
                 else:
                     module_item.setCheckState(0, Qt.Unchecked)
             self.pageContent.moduleTree.addTopLevelItem(item)
         self.pageContent.moduleTree.sortItems(0, Qt.AscendingOrder)

-        
-    
-    def _fillPropertyTable(self):
-        """
-        Slot called when the user selects a module from the module tree.
-        Fills the property table using the configuration parameters defined in
-        the source tree.
-        """
-        module = self._currentModule()
-        if module is not None:
-            self._control_group.clear()
-            configuration = self._projectInfoRetrieve("MODULES")[module]["configuration"]
-            module_description = self._projectInfoRetrieve("MODULES")[module]["description"]
-            self.pageContent.moduleLabel.setText(module_description)
-            self.pageContent.moduleLabel.setVisible(True)
-            self.pageContent.propertyTable.clear()
-            self.pageContent.propertyTable.setRowCount(0)
-            if configuration != "":
-                configurations = self._projectInfoRetrieve("CONFIGURATIONS")[configuration]
-                param_list = sorted(configurations["paramlist"])
-                index = 0
-                for i, property in param_list:
-                    if "type" in configurations[property]["informations"] and configurations[property]["informations"]["type"] == "autoenabled":
-                        ## Doesn't show the hidden fields
-                        pass
-                    else:
-                        ## Set the row count to the current index + 1
-                        self.pageContent.propertyTable.setRowCount(index + 1)
-                        item = QTableWidgetItem(configurations[property]["brief"])
-                        item.setData(Qt.UserRole, qvariant_converter.convertString(property))
-                        self.pageContent.propertyTable.setItem(index, 0, item)
-                        if "type" in configurations[property]["informations"].keys() and configurations[property]["informations"]["type"] == "boolean":
-                            self._insertCheckBox(index, configurations[property]["value"])
-                        elif "type" in configurations[property]["informations"].keys() and configurations[property]["informations"]["type"] == "enum":
-                            self._insertComboBox(index, configurations[property]["value"], configurations[property]["informations"]["value_list"])
-                        elif "type" in configurations[property]["informations"] and configurations[property]["informations"]["type"] == "int":
-                            self._insertSpinBox(index, configurations[property]["value"], configurations[property]["informations"])
-                        else:
-                            # Not defined type, rendered as a text field
-                            self.pageContent.propertyTable.setItem(index, 1, QTableWidgetItem(configurations[property]["value"]))
-                        index += 1
-            if self.pageContent.propertyTable.rowCount() == 0:
-                module_label = self.pageContent.moduleLabel.text()
-                module_label += "\n\nNo configuration needed."
-                self.pageContent.moduleLabel.setText(module_label)
-    
-    def _insertCheckBox(self, index, value):
+            
+    def insertCheckBox(self, index, value):

         """
         Inserts in the table at index a checkbox for a boolean property setted
         to value.
         """
         Inserts in the table at index a checkbox for a boolean property setted
         to value.


@@ -146,13 +238,13 @@ class BModulePage(BWizardPage):
             check_box.setChecked(False)
         self._control_group.addControl(index, check_box)
     
             check_box.setChecked(False)
         self._control_group.addControl(index, check_box)
     

-    def _insertComboBox(self, index, value, value_list):
+    def insertComboBox(self, index, value, value_list):

         """
         Inserts in the table at index a combobox for an enum property setted
         to value.
         """
         try:
         """
         Inserts in the table at index a combobox for an enum property setted
         to value.
         """
         try:

-            enum = self._projectInfoRetrieve("LISTS")[value_list]
+            enum = self.projectInfo("LISTS")[value_list]

             combo_box = QComboBox()
             self.pageContent.propertyTable.setCellWidget(index, 1, combo_box)
             for i, element in enumerate(enum):
             combo_box = QComboBox()
             self.pageContent.propertyTable.setCellWidget(index, 1, combo_box)
             for i, element in enumerate(enum):


@@ -161,15 +253,15 @@ class BModulePage(BWizardPage):
                     combo_box.setCurrentIndex(i)
             self._control_group.addControl(index, combo_box)
         except KeyError:
                     combo_box.setCurrentIndex(i)
             self._control_group.addControl(index, combo_box)
         except KeyError:

-            self._exceptionOccurred(self.tr("Define list \"%1\" not found. Check definition files.").arg(value_list))
+            self.exceptionOccurred(self.tr("Define list \"%1\" not found. Check definition files.").arg(value_list))

             self.pageContent.propertyTable.setItem(index, 1, QTableWidgetItem(value))
     
             self.pageContent.propertyTable.setItem(index, 1, QTableWidgetItem(value))
     

-    def _insertSpinBox(self, index, value, informations):
+    def insertSpinBox(self, index, value, informations):

         """
         Inserts in the table at index a spinbox for an int, a long or an unsigned
         long property setted to value.
         """
         """
         Inserts in the table at index a spinbox for an int, a long or an unsigned
         long property setted to value.
         """

-        ## int, long or undefined type property
+        # int, long or undefined type property

         spin_box = None
         if bertos_utils.isLong(informations) or bertos_utils.isUnsignedLong(informations):
             spin_box = QDoubleSpinBox()
         spin_box = None
         if bertos_utils.isLong(informations) or bertos_utils.isUnsignedLong(informations):
             spin_box = QDoubleSpinBox()


@@ -192,9 +284,9 @@ class BModulePage(BWizardPage):
             minimum = 0
             maximum = 4294967295
             suff = "UL"
             minimum = 0
             maximum = 4294967295
             suff = "UL"

-        if "min" in informations.keys():
+        if "min" in informations:

             minimum = int(informations["min"])
             minimum = int(informations["min"])

-        if "max" in informations.keys():
+        if "max" in informations:

             maximum = int(informations["max"])
         spin_box.setRange(minimum, maximum)
         spin_box.setSuffix(suff)
             maximum = int(informations["max"])
         spin_box.setRange(minimum, maximum)
         spin_box.setSuffix(suff)


@@ -202,146 +294,70 @@ class BModulePage(BWizardPage):
         self._control_group.addControl(index, spin_box)
         
     
         self._control_group.addControl(index, spin_box)
         
     

-    def _currentModule(self):
+    def currentModule(self):

         """
         Retuns the current module name.
         """
         current_module = self.pageContent.moduleTree.currentItem()
         # return only the child items
         """
         Retuns the current module name.
         """
         current_module = self.pageContent.moduleTree.currentItem()
         # return only the child items

-        if current_module is not None and current_module.parent() is not None:
+        if current_module and current_module.parent():

             return unicode(current_module.text(0))
         else:
             return None
     
             return unicode(current_module.text(0))
         else:
             return None
     

-    def _currentModuleConfigurations(self):
+    def currentModuleConfigurations(self):

         """
         Returns the current module configuration.
         """
         """
         Returns the current module configuration.
         """

-        return self._configurations(self._currentModule())
+        return self.configurations(self.currentModule())

     
     

-    def _currentProperty(self):
+    def currentProperty(self):

         """
         Rerturns the current property from the property table.
         """
         return qvariant_converter.getString(self.pageContent.propertyTable.item(self.pageContent.propertyTable.currentRow(), 0).data(Qt.UserRole))
     
         """
         Rerturns the current property from the property table.
         """
         return qvariant_converter.getString(self.pageContent.propertyTable.item(self.pageContent.propertyTable.currentRow(), 0).data(Qt.UserRole))
     

-    def _currentPropertyItem(self):
+    def currentPropertyItem(self):

         """
         Returns the QTableWidgetItem of the current property.
         """
         return self.pageContent.propertyTable.item(self.pageContent.propertyTable.currentRow(), 0)
     
         """
         Returns the QTableWidgetItem of the current property.
         """
         return self.pageContent.propertyTable.item(self.pageContent.propertyTable.currentRow(), 0)
     

-    def _configurations(self, module):
+    def configurations(self, module):

         """
         Returns the configuration for the selected module.
         """
         """
         Returns the configuration for the selected module.
         """

-        configuration = self._projectInfoRetrieve("MODULES")[module]["configuration"]
+        configuration = self.projectInfo("MODULES")[module]["configuration"]

         if len(configuration) > 0:
         if len(configuration) > 0:

-            return self._projectInfoRetrieve("CONFIGURATIONS")[configuration]
+            return self.projectInfo("CONFIGURATIONS")[configuration]

         else:
             return {}
     
         else:
             return {}
     

-    def _resetPropertyDescription(self):
+    def resetPropertyDescription(self):

         """
         Resets the label for each property table entry.
         """
         for index in range(self.pageContent.propertyTable.rowCount()):
             property_name = qvariant_converter.getString(self.pageContent.propertyTable.item(index, 0).data(Qt.UserRole))
             # Awful solution! Needed because if the user change the module, the selection changed...
         """
         Resets the label for each property table entry.
         """
         for index in range(self.pageContent.propertyTable.rowCount()):
             property_name = qvariant_converter.getString(self.pageContent.propertyTable.item(index, 0).data(Qt.UserRole))
             # Awful solution! Needed because if the user change the module, the selection changed...

-            if property_name not in self._currentModuleConfigurations().keys():
+            if property_name not in self.currentModuleConfigurations():

                 break
                 break

-            self.pageContent.propertyTable.item(index, 0).setText(self._currentModuleConfigurations()[property_name]['brief'])
-    
-    def _showPropertyDescription(self):
-        """
-        Slot called when the property selection changes. Shows the description
-        of the selected property.
-        """
-        self._resetPropertyDescription()
-        configurations = self._currentModuleConfigurations()
-        if self._currentProperty() in configurations.keys():
-            description = configurations[self._currentProperty()]["brief"]
-            name = self._currentProperty()
-            self._currentPropertyItem().setText(description + "\n" + name)
-    
-    def _setupUi(self):
-        """
-        Set up the user interface.
-        """
-        self.pageContent.moduleTree.clear()
-        self.pageContent.moduleTree.setHeaderHidden(True)
-        self.pageContent.propertyTable.horizontalHeader().setResizeMode(QHeaderView.Stretch)
-        self.pageContent.propertyTable.horizontalHeader().setVisible(False)
-        self.pageContent.propertyTable.verticalHeader().setResizeMode(QHeaderView.ResizeToContents)
-        self.pageContent.propertyTable.verticalHeader().setVisible(False)
-        self.pageContent.propertyTable.setColumnCount(2)
-        self.pageContent.propertyTable.setRowCount(0)
-        self.pageContent.moduleLabel.setVisible(False)
-    
-    def _connectSignals(self):
-        """
-        Connect the signals with the related slots.
-        """
-        self.connect(self.pageContent.moduleTree, SIGNAL("itemPressed(QTreeWidgetItem*, int)"), self._fillPropertyTable)
-        self.connect(self.pageContent.moduleTree, SIGNAL("itemChanged(QTreeWidgetItem*, int)"), self._dependencyCheck)
-        self.connect(self.pageContent.propertyTable, SIGNAL("itemSelectionChanged()"), self._showPropertyDescription)
-        self.connect(self._control_group, SIGNAL("stateChanged"), self._saveValue)
-    
-    def _saveValue(self, index):
-        """
-        Slot called when the user modifies one of the configuration parameters.
-        It stores the new value."""
-        property = qvariant_converter.getString(self.pageContent.propertyTable.item(index, 0).data(Qt.UserRole))
-        configuration = self._projectInfoRetrieve("MODULES")[self._currentModule()]["configuration"]
-        configurations = self._projectInfoRetrieve("CONFIGURATIONS")
-        if "type" not in configurations[configuration][property]["informations"].keys() or configurations[configuration][property]["informations"]["type"] == "int":
-            configurations[configuration][property]["value"] = str(int(self.pageContent.propertyTable.cellWidget(index, 1).value()))
-        elif configurations[configuration][property]["informations"]["type"] == "enum":
-            configurations[configuration][property]["value"] = unicode(self.pageContent.propertyTable.cellWidget(index, 1).currentText())
-        elif configurations[configuration][property]["informations"]["type"] == "boolean":
-            if self.pageContent.propertyTable.cellWidget(index, 1).isChecked():
-                configurations[configuration][property]["value"] = "1"
-            else:
-                configurations[configuration][property]["value"] = "0"
-        self._projectInfoStore("CONFIGURATIONS", configurations)
-    
-    def _moduleSelectionChanged(self, index):
-        """
-        Slot called when the user selects or unselects a module from the module
-        tree.
-        """
-        module = unicode(self.pageContent.moduleTable.item(index, 1).text())
-        if self._button_group.button(index).isChecked():
-            self._moduleSelected(module)
-        else:
-            self._moduleUnselected(module)
-    
-    def _dependencyCheck(self, item):
-        """
-        Checks the dependencies of the module associated with the given item.
-        """
-        checked = False
-        module = unicode(item.text(0))
-        if item.checkState(0) == Qt.Checked:
-            self._moduleSelected(module)
-        else:
-            self._moduleUnselected(module)
-            self.removeFileDependencies(module)
+            self.pageContent.propertyTable.item(index, 0).setText(self.currentModuleConfigurations()[property_name]['brief'])

     
     

-    def _moduleSelected(self, selectedModule):
+    def moduleSelected(self, selectedModule):

         """
         Resolves the selection dependencies.
         """
         """
         Resolves the selection dependencies.
         """

-        modules = self._projectInfoRetrieve("MODULES")
+        modules = self.projectInfo("MODULES")

         modules[selectedModule]["enabled"] = True
         modules[selectedModule]["enabled"] = True

-        self._projectInfoStore("MODULES", modules)
-        depends = self._projectInfoRetrieve("MODULES")[selectedModule]["depends"]
+        self.setProjectInfo("MODULES", modules)
+        depends = self.projectInfo("MODULES")[selectedModule]["depends"]

         unsatisfied = []
         if self.pageContent.automaticFix.isChecked():
             unsatisfied = self.selectDependencyCheck(selectedModule)
         if len(unsatisfied) > 0:
             for module in unsatisfied:
         unsatisfied = []
         if self.pageContent.automaticFix.isChecked():
             unsatisfied = self.selectDependencyCheck(selectedModule)
         if len(unsatisfied) > 0:
             for module in unsatisfied:

-                modules = self._projectInfoRetrieve("MODULES")
+                modules = self.projectInfo("MODULES")

                 modules[module]["enabled"] = True
             for category in range(self.pageContent.moduleTree.topLevelItemCount()):
                 item = self.pageContent.moduleTree.topLevelItem(category)
                 modules[module]["enabled"] = True
             for category in range(self.pageContent.moduleTree.topLevelItemCount()):
                 item = self.pageContent.moduleTree.topLevelItem(category)


@@ -349,13 +365,13 @@ class BModulePage(BWizardPage):
                     if unicode(item.child(child).text(0)) in unsatisfied:
                         item.child(child).setCheckState(0, Qt.Checked)
     
                     if unicode(item.child(child).text(0)) in unsatisfied:
                         item.child(child).setCheckState(0, Qt.Checked)
     

-    def _moduleUnselected(self, unselectedModule):
+    def moduleUnselected(self, unselectedModule):

         """
         Resolves the unselection dependencies.
         """
         """
         Resolves the unselection dependencies.
         """

-        modules = self._projectInfoRetrieve("MODULES")
+        modules = self.projectInfo("MODULES")

         modules[unselectedModule]["enabled"] = False
         modules[unselectedModule]["enabled"] = False

-        self._projectInfoStore("MODULES", modules)
+        self.setProjectInfo("MODULES", modules)

         unsatisfied = []
         if self.pageContent.automaticFix.isChecked():
             unsatisfied = self.unselectDependencyCheck(unselectedModule)
         unsatisfied = []
         if self.pageContent.automaticFix.isChecked():
             unsatisfied = self.unselectDependencyCheck(unselectedModule)


@@ -365,7 +381,7 @@ class BModulePage(BWizardPage):
             choice = QMessageBox.warning(self, self.tr("Dependency error"), message, QMessageBox.Yes | QMessageBox.No, QMessageBox.Yes)
             if choice == QMessageBox.Yes:
                 for module in unsatisfied:
             choice = QMessageBox.warning(self, self.tr("Dependency error"), message, QMessageBox.Yes | QMessageBox.No, QMessageBox.Yes)
             if choice == QMessageBox.Yes:
                 for module in unsatisfied:

-                    modules = self._projectInfoRetrieve("MODULES")
+                    modules = self.projectInfo("MODULES")

                     modules[module]["enabled"] = False
                 for category in range(self.pageContent.moduleTree.topLevelItemCount()):
                     item = self.pageContent.moduleTree.topLevelItem(category)
                     modules[module]["enabled"] = False
                 for category in range(self.pageContent.moduleTree.topLevelItemCount()):
                     item = self.pageContent.moduleTree.topLevelItem(category)


@@ -378,8 +394,8 @@ class BModulePage(BWizardPage):
         Returns the list of unsatisfied dependencies after a selection.
         """
         unsatisfied = set()
         Returns the list of unsatisfied dependencies after a selection.
         """
         unsatisfied = set()

-        modules = self._projectInfoRetrieve("MODULES")
-        files = self._projectInfoRetrieve("FILES")
+        modules = self.projectInfo("MODULES")
+        files = self.projectInfo("FILES")

         for dependency in modules[module]["depends"]:
             if dependency in modules and not modules[dependency]["enabled"]:
                 unsatisfied |= set([dependency])
         for dependency in modules[module]["depends"]:
             if dependency in modules and not modules[dependency]["enabled"]:
                 unsatisfied |= set([dependency])


@@ -390,7 +406,7 @@ class BModulePage(BWizardPage):
                     files[dependency] += 1
                 else:
                     files[dependency] = 1
                     files[dependency] += 1
                 else:
                     files[dependency] = 1

-        self._projectInfoStore("FILES", files)
+        self.setProjectInfo("FILES", files)

         return unsatisfied
     
     def unselectDependencyCheck(self, dependency):
         return unsatisfied
     
     def unselectDependencyCheck(self, dependency):


@@ -398,7 +414,7 @@ class BModulePage(BWizardPage):
         Returns the list of unsatisfied dependencies after an unselection.
         """
         unsatisfied = set()
         Returns the list of unsatisfied dependencies after an unselection.
         """
         unsatisfied = set()

-        modules = self._projectInfoRetrieve("MODULES")
+        modules = self.projectInfo("MODULES")

         for module, informations in modules.items():
             if dependency in informations["depends"] and informations["enabled"]:
                 unsatisfied |= set([module])
         for module, informations in modules.items():
             if dependency in informations["depends"] and informations["enabled"]:
                 unsatisfied |= set([module])


@@ -410,15 +426,15 @@ class BModulePage(BWizardPage):
         """
         Removes the files dependencies of the given module.
         """
         """
         Removes the files dependencies of the given module.
         """

-        modules = self._projectInfoRetrieve("MODULES")
-        files = self._projectInfoRetrieve("FILES")
+        modules = self.projectInfo("MODULES")
+        files = self.projectInfo("FILES")

         dependencies = modules[module]["depends"]
         for dependency in dependencies:
             if dependency in files:
                 files[dependency] -= 1
                 if files[dependency] == 0:
                     del files[dependency]
         dependencies = modules[module]["depends"]
         for dependency in dependencies:
             if dependency in files:
                 files[dependency] -= 1
                 if files[dependency] == 0:
                     del files[dependency]

-        self._projectInfoStore("FILES", files)
+        self.setProjectInfo("FILES", files)

 
 class QControlGroup(QObject):
     """
 
 class QControlGroup(QObject):
     """


@@ -437,13 +453,13 @@ class QControlGroup(QObject):
         """
         self._controls[id] = control
         if type(control) == QCheckBox:
         """
         self._controls[id] = control
         if type(control) == QCheckBox:

-            self.connect(control, SIGNAL("stateChanged(int)"), lambda: self._stateChanged(id))
+            self.connect(control, SIGNAL("stateChanged(int)"), lambda: self.stateChanged(id))

         elif type(control) == QSpinBox:
         elif type(control) == QSpinBox:

-            self.connect(control, SIGNAL("valueChanged(int)"), lambda: self._stateChanged(id))
+            self.connect(control, SIGNAL("valueChanged(int)"), lambda: self.stateChanged(id))

         elif type(control) == QComboBox:
         elif type(control) == QComboBox:

-            self.connect(control, SIGNAL("currentIndexChanged(int)"), lambda: self._stateChanged(id))
+            self.connect(control, SIGNAL("currentIndexChanged(int)"), lambda: self.stateChanged(id))

         elif type(control) == QDoubleSpinBox:
         elif type(control) == QDoubleSpinBox:

-            self.connect(control, SIGNAL("valueChanged(double)"), lambda: self._stateChanged(id))
+            self.connect(control, SIGNAL("valueChanged(double)"), lambda: self.stateChanged(id))

     
     def clear(self):
         """
     
     def clear(self):
         """


@@ -451,7 +467,7 @@ class QControlGroup(QObject):
         """
         self._controls = {}
     
         """
         self._controls = {}
     

-    def _stateChanged(self, id):
+    def stateChanged(self, id):

         """
         Slot called when the value of one of the stored widget changes. It emits
         another signal.
         """
         Slot called when the value of one of the stored widget changes. It emits
         another signal.