Sistema l'errore da me commesso in fase di conversione...

[bertos.git] / app / demo / appconfig.h

diff --git a/app/demo/appconfig.h b/app/demo/appconfig.h
old mode 100755 (executable)
new mode 100644 (file)
index 70a02af..d46212d
--- a/app/demo/appconfig.h
+++ b/app/demo/appconfig.h
@@ -1,4 +1,4 @@
-/*!
+/**
  * \file
  * <!--
  * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
@@ -46,6 +46,15 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.5  2006/09/20 19:55:01  marco
+ *#* Added CONFIG_LCD_4BIT.
+ *#*
+ *#* Revision 1.4  2006/09/13 18:29:22  bernie
+ *#* Add a few missing CONFIG_ definitions.
+ *#*
+ *#* Revision 1.3  2006/07/19 12:56:24  bernie
+ *#* Convert to new Doxygen style.
+ *#*
  *#* Revision 1.2  2006/05/28 12:18:12  bernie
  *#* Disable menu timeout.
  *#*
@@ -89,13 +98,13 @@
  *#* Move cfg/config.h to appconfig.h.
  *#*/
 
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
+#ifndef APPCONFIG_H
+#define APPCONFIG_H
 
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
 #define CONFIG_KDEBUG_BAUDRATE  19200
 
-/*!
+/**
  * printf()-style formatter configuration.
  *
  * \sa PRINTF_DISABLED
@@ -106,54 +115,54 @@
  */
 #define CONFIG_PRINTF PRINTF_FULL
 
-/*!
+/**
  * Multithreading kernel.
  *
  * \sa config_kern.h
  */
 #define CONFIG_KERNEL 1
 
-/*!
+/**
  * \name Serial driver parameters
  * \{
  */
-       /*! [bytes] Size of the outbound FIFO buffer for port 0. */
+       /** [bytes] Size of the outbound FIFO buffer for port 0. */
        #define CONFIG_UART0_TXBUFSIZE  32
 
-       /*! [bytes] Size of the inbound FIFO buffer for port 0. */
+       /** [bytes] Size of the inbound FIFO buffer for port 0. */
        #define CONFIG_UART0_RXBUFSIZE  64
 
-       /*! [bytes] Size of the outbound FIFO buffer for port 1. */
+       /** [bytes] Size of the outbound FIFO buffer for port 1. */
        #define CONFIG_UART1_TXBUFSIZE  32
 
-       /*! [bytes] Size of the inbound FIFO buffer for port 1. */
+       /** [bytes] Size of the inbound FIFO buffer for port 1. */
        #define CONFIG_UART1_RXBUFSIZE  64
 
-       /*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+       /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
        #define CONFIG_SPI_TXBUFSIZE    16
 
-       /*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+       /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
        #define CONFIG_SPI_RXBUFSIZE    32
 
-       /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+       /** Default transmit timeout (ms). Set to -1 to disable timeout support */
        #define CONFIG_SER_TXTIMEOUT    -1
 
-       /*! Default receive timeout (ms). Set to -1 to disable timeout support */
+       /** Default receive timeout (ms). Set to -1 to disable timeout support */
        #define CONFIG_SER_RXTIMEOUT    -1
 
-       /*! Use RTS/CTS handshake */
+       /** Use RTS/CTS handshake */
        #define CONFIG_SER_HWHANDSHAKE   0
 
-       /*! Default baud rate (set to 0 to disable) */
+       /** Default baud rate (set to 0 to disable) */
        #define CONFIG_SER_DEFBAUDRATE   0
 
-       /*! Enable ser_gets() and ser_gets_echo() */
+       /** Enable ser_gets() and ser_gets_echo() */
        #define CONFIG_SER_GETS          0
 
        /** Enable second serial port in emulator. */
        #define CONFIG_EMUL_UART1        0
 
-       /*!
+       /**
         * Transmit always something on serial port 0 TX
         * to avoid interference when sending burst of data,
         * using AVR multiprocessor serial mode
@@ -163,16 +172,16 @@
        #define CONFIG_SER_STROBE        0
 /*\}*/
 
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
 #define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
 
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0
 
-//! Enable watchdog timer.
+/// Enable watchdog timer.
 #define CONFIG_WATCHDOG  1
 
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
 
 /// Select bitmap pixel format.
@@ -196,7 +205,10 @@
 /// Enable key beeps.
 #define CONFIG_KBD_BEEP  1
 
-/*!
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS  0
+
+/**
  * \name Type for the chart dataset
  * \{
  */
@@ -216,4 +228,7 @@
 /// Accept input implicitly after this amount of time.
 #define CONFIG_LEVELEDIT_TIMEOUT 3000 /* ms */
 
-#endif /* CONFIG_COMMON_H */
+/// LCD bus size. If 0 use 8bit bus.
+#define CONFIG_LCD_4BIT 0
+
+#endif /* APPCONFIG_H */