-/*!
+/**
* \file
* <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
* Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
* -->
*
* \brief DevLib configuration options
* \author Stefano Fedrigo <aleph@develer.com>
*/
-/*#*
- *#* $Log$
- *#* Revision 1.3 2006/06/12 21:37:01 marco
- *#* implemented some commands (ver and sleep)
- *#*
- *#* Revision 1.2 2006/06/01 12:29:21 marco
- *#* Add first simple protocol command (version request).
- *#*
- *#* Revision 1.1 2006/05/18 00:41:47 bernie
- *#* New triface devlib application.
- *#*
- *#*/
-
#ifndef APPCONFIG_TRIFACE_H
#define APPCONFIG_TRIFACE_H
/** Baud-rate for the kdebug console */
-#define CONFIG_KDEBUG_BAUDRATE 38400
+#define CONFIG_KDEBUG_BAUDRATE 115200
/** Serial port number for kdebug console */
-#define CONFIG_KDEBUG_PORT 0
+#define CONFIG_KDEBUG_PORT 1
/**
/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_RXBUFSIZE 32
+ /** SPI data order (AVR only). */
+ #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
+
+ /** SPI clock division factor (AVR only). */
+ #define CONFIG_SPI_CLOCK_DIV 16
+
+ /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+ #define CONFIG_SPI_CLOCK_POL 0
+
+ /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+ #define CONFIG_SPI_CLOCK_PHASE 0
+
/** Default transmit timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_TXTIMEOUT -1
/** Default baud rate (set to 0 to disable) */
#define CONFIG_SER_DEFBAUDRATE 0
+ /** Host Port Baud Rate */
+ #define CONFIG_SER_HOSTPORTBAUDRATE 115200
+
+ /** Host Port */
+ #define CONFIG_SER_HOSTPORT 1
+
/** Enable ser_gets() and ser_gets_echo() */
- #define CONFIG_SER_GETS 1
+ #define CONFIG_SER_GETS 0
/** Enable second serial port in emulator. */
#define CONFIG_EMUL_UART1 0
/*\}*/
/// Hardware timer selection for drv/timer.c
-#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE0
+#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
/// Debug timer interrupt using a strobe pin.
#define CONFIG_TIMER_STROBE 0
+/// Enable ADS strobe.
+#define CONFIG_ADC_STROBE 0
+
/// Enable watchdog timer.
#define CONFIG_WATCHDOG 0
-/// Enable internal parser commands.
-#define CONFIG_INTERNAL_COMMANDS 0
+/// EEPROM type for drv/eeprom.c
+#define CONFIG_EEPROM_TYPE EEPROM_24XX256
+
+/// Select bitmap pixel format.
+#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
+
+/// Enable line clipping algorithm.
+#define CONFIG_GFX_CLIPPING 1
+
+/// Enable text rendering in bitmaps.
+#define CONFIG_GFX_TEXT 1
+
+/// Enable virtual coordinate system.
+#define CONFIG_GFX_VCOORDS 1
+
+/// Keyboard polling method
+#define CONFIG_KBD_POLL KBD_POLL_SOFTINT
+
+/// Enable keyboard event delivery to observers
+#define CONFIG_KBD_OBSERVER 0
+
+/// Enable key beeps
+#define CONFIG_KBD_BEEP 1
+
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS 1
+
+/**
+ * \name Type for the chart dataset
+ * \{
+ */
+#define CONFIG_CHART_TYPE_X uint8_t
+#define CONFIG_CHART_TYPE_Y uint8_t
+/*\}*/
+
+/// Enable button bar behind menus
+#define CONFIG_MENU_MENUBAR 0
+
+/// Enable smooth scrolling in menus
+#define CONFIG_MENU_SMOOTH 1
+
+/// Size of block for MD2 algorithm.
+#define CONFIG_MD2_BLOCK_LEN 16
+
+/// Use standard permutation in MD2 algorithm.
+#define CONFIG_MD2_STD_PERM 0
+
+/// Define a size, in byte, of entropy pool.
+#define CONFIG_SIZE_ENTROPY_POOL 64
+
+/// Turn on or off timer support in Randpool.
+#define CONFIG_RANDPOOL_TIMER 1
#endif /* APPCONFIG_TRIFACE_H */