-/*!
+/**
* \file
* <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
* Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
* -->
*
* \brief DevLib configuration options
* \author Stefano Fedrigo <aleph@develer.com>
*/
-/*#*
- *#* $Log$
- *#* Revision 1.1 2006/05/18 00:41:47 bernie
- *#* New triface devlib application.
- *#*
- *#*/
-
#ifndef APPCONFIG_TRIFACE_H
#define APPCONFIG_TRIFACE_H
/** Baud-rate for the kdebug console */
-#define CONFIG_KDEBUG_BAUDRATE 38400
+#define CONFIG_KDEBUG_BAUDRATE 115200
+
+/** Serial port number for kdebug console */
+#define CONFIG_KDEBUG_PORT 1
+
/**
* printf()-style formatter configuration.
/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_RXBUFSIZE 32
+ /** SPI data order (AVR only). */
+ #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
+
+ /** SPI clock division factor (AVR only). */
+ #define CONFIG_SPI_CLOCK_DIV 16
+
+ /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+ #define CONFIG_SPI_CLOCK_POL 0
+
+ /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+ #define CONFIG_SPI_CLOCK_PHASE 0
+
/** Default transmit timeout (ms). Set to -1 to disable timeout support */
- #define CONFIG_SER_TXTIMEOUT -1
+ #define CONFIG_SER_TXTIMEOUT 100
/** Default receive timeout (ms). Set to -1 to disable timeout support */
- #define CONFIG_SER_RXTIMEOUT -1
+ #define CONFIG_SER_RXTIMEOUT 100
/** Use RTS/CTS handshake */
#define CONFIG_SER_HWHANDSHAKE 0
/** Default baud rate (set to 0 to disable) */
#define CONFIG_SER_DEFBAUDRATE 0
+ /** Host Port Baud Rate */
+ #define CONFIG_SER_HOSTPORTBAUDRATE 115200
+
+ /** Host Port */
+ #define CONFIG_SER_HOSTPORT 1
+
/** Enable ser_gets() and ser_gets_echo() */
- #define CONFIG_SER_GETS 0
+ #define CONFIG_SER_GETS 1
/** Enable second serial port in emulator. */
#define CONFIG_EMUL_UART1 0
#define CONFIG_SER_STROBE 0
/*\}*/
+/// Enable kfiler_gets() and kfile_gets_echo()
+#define CONFIG_KFILE_GETS 1
+
/// Hardware timer selection for drv/timer.c
-#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
+#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE0
/// Debug timer interrupt using a strobe pin.
#define CONFIG_TIMER_STROBE 0
+/// Enable ADS strobe.
+#define CONFIG_ADC_STROBE 0
+
/// Enable watchdog timer.
-#define CONFIG_WATCHDOG 0
+#define CONFIG_WATCHDOG 1
+
+/// Enable internal parser commands.
+#define CONFIG_INTERNAL_COMMANDS 0
#endif /* APPCONFIG_TRIFACE_H */