Move xmodem protocol in appropriate dir.

[bertos.git] / app / triface / appconfig.h

diff --git a/app/triface/appconfig.h b/app/triface/appconfig.h
old mode 100755 (executable)
new mode 100644 (file)
index 9bbd996..afa44be
--- a/app/triface/appconfig.h
+++ b/app/triface/appconfig.h
@@ -1,8 +1,33 @@
-/*!
+/**
  * \file
  * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
  * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
  * -->
  *
  * \brief DevLib configuration options
@@ -44,18 +69,15 @@
  * \author Stefano Fedrigo <aleph@develer.com>
  */
 
-/*#*
- *#* $Log$
- *#* Revision 1.1  2006/05/18 00:41:47  bernie
- *#* New triface devlib application.
- *#*
- *#*/
-
 #ifndef APPCONFIG_TRIFACE_H
 #define APPCONFIG_TRIFACE_H
 
 /** Baud-rate for the kdebug console */
-#define CONFIG_KDEBUG_BAUDRATE  38400
+#define CONFIG_KDEBUG_BAUDRATE  115200
+
+/** Serial port number for kdebug console */
+#define CONFIG_KDEBUG_PORT  1
+
 
 /**
  * printf()-style formatter configuration.
@@ -97,11 +119,23 @@
        /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
        #define CONFIG_SPI_RXBUFSIZE    32
 
+       /** SPI data order (AVR only). */
+       #define CONFIG_SPI_DATA_ORDER   SER_MSB_FIRST
+
+       /** SPI clock division factor (AVR only). */
+       #define CONFIG_SPI_CLOCK_DIV    16
+
+       /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+       #define CONFIG_SPI_CLOCK_POL    0
+
+       /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+       #define CONFIG_SPI_CLOCK_PHASE  0
+
        /** Default transmit timeout (ms). Set to -1 to disable timeout support */
-       #define CONFIG_SER_TXTIMEOUT    -1
+       #define CONFIG_SER_TXTIMEOUT    100
 
        /** Default receive timeout (ms). Set to -1 to disable timeout support */
-       #define CONFIG_SER_RXTIMEOUT    -1
+       #define CONFIG_SER_RXTIMEOUT    100
 
        /** Use RTS/CTS handshake */
        #define CONFIG_SER_HWHANDSHAKE   0
@@ -109,8 +143,14 @@
        /** Default baud rate (set to 0 to disable) */
        #define CONFIG_SER_DEFBAUDRATE   0
 
+       /** Host Port Baud Rate */
+       #define CONFIG_SER_HOSTPORTBAUDRATE     115200
+       
+       /** Host Port */
+       #define CONFIG_SER_HOSTPORT 1
+
        /** Enable ser_gets() and ser_gets_echo() */
-       #define CONFIG_SER_GETS          0
+       #define CONFIG_SER_GETS          1
 
        /** Enable second serial port in emulator. */
        #define CONFIG_EMUL_UART1        0
@@ -125,13 +165,22 @@
        #define CONFIG_SER_STROBE        0
 /*\}*/
 
+/// Enable kfiler_gets() and kfile_gets_echo()
+#define CONFIG_KFILE_GETS 1
+
 /// Hardware timer selection for drv/timer.c
-#define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
+#define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE0
 
 /// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0
 
+/// Enable ADS strobe.
+#define CONFIG_ADC_STROBE  0
+
 /// Enable watchdog timer.
-#define CONFIG_WATCHDOG  0
+#define CONFIG_WATCHDOG  1
+
+/// Enable internal parser commands.
+#define CONFIG_INTERNAL_COMMANDS  0
 
 #endif /* APPCONFIG_TRIFACE_H */