-/*!
+/**
* \file
* <!--
* Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
/*#*
*#* $Log$
+ *#* Revision 1.5 2006/09/20 13:54:40 marco
+ *#* Added new SPI definitions.
+ *#*
+ *#* Revision 1.4 2006/07/19 12:56:25 bernie
+ *#* Convert to new Doxygen style.
+ *#*
+ *#* Revision 1.3 2006/06/12 21:37:01 marco
+ *#* implemented some commands (ver and sleep)
+ *#*
+ *#* Revision 1.2 2006/06/01 12:29:21 marco
+ *#* Add first simple protocol command (version request).
+ *#*
*#* Revision 1.1 2006/05/18 00:41:47 bernie
*#* New triface devlib application.
*#*
/** Baud-rate for the kdebug console */
#define CONFIG_KDEBUG_BAUDRATE 38400
+/** Serial port number for kdebug console */
+#define CONFIG_KDEBUG_PORT 0
+
+
/**
* printf()-style formatter configuration.
*
/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_RXBUFSIZE 32
+ /** SPI data order (AVR only). */
+ #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
+
+ /** SPI clock division factor (AVR only). */
+ #define CONFIG_SPI_CLOCK_DIV 16
+
+ /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+ #define CONFIG_SPI_CLOCK_POL 0
+
+ /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+ #define CONFIG_SPI_CLOCK_PHASE 0
+
/** Default transmit timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_TXTIMEOUT -1
#define CONFIG_SER_DEFBAUDRATE 0
/** Enable ser_gets() and ser_gets_echo() */
- #define CONFIG_SER_GETS 0
+ #define CONFIG_SER_GETS 1
/** Enable second serial port in emulator. */
#define CONFIG_EMUL_UART1 0
/*\}*/
/// Hardware timer selection for drv/timer.c
-#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
+#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE0
/// Debug timer interrupt using a strobe pin.
#define CONFIG_TIMER_STROBE 0
/// Enable watchdog timer.
#define CONFIG_WATCHDOG 0
+/// Enable internal parser commands.
+#define CONFIG_INTERNAL_COMMANDS 0
+
#endif /* APPCONFIG_TRIFACE_H */