/**
* \file
* <!--
- * Copyright 2006 Develer S.r.l. (http://www.develer.com/)
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000 Bernardo Innocenti <bernie@codewiz.org>
+ *
* -->
*
* \brief Implementation of the command protocol between the board and the host
* \author Giovanni Bajo <rasky@develer.com>
* \author Marco Benelli <marco@develer.com>
* \author Bernardo Innocenti <bernie@develer.com>
+ * \author Daniele Basile <asterix@develer.com>
*/
-/*#*
- *#* $Log$
- *#* Revision 1.4 2006/06/14 00:26:48 marco
- *#* Use new macros for defining commands.
- *#*
- *#* Revision 1.3 2006/06/13 19:07:31 marco
- *#* Fixed a bug in protocol_reply. Simplified rpc.
- *#*
- *#* Revision 1.2 2006/06/12 21:37:02 marco
- *#* implemented some commands (ver and sleep)
- *#*
- *#* Revision 1.1 2006/06/01 12:29:21 marco
- *#* Add first simple protocol command (version request).
- *#*
- *#*/
-
#include "protocol.h"
+#include "cmd_ctor.h" // MAKE_CMD, REGISTER_CMD
+#include "verstag.h"
-#include <drv/ser.h>
#include <drv/timer.h>
+#include <drv/ser.h>
+#include <drv/sipo.h>
+#include <drv/wdt.h>
+#include <drv/buzzer.h>
+
#include <mware/readline.h>
#include <mware/parser.h>
+
#include <cfg/compiler.h>
#include <cfg/debug.h>
-#include <verstag.h>
+#include <kern/kfile.h>
+
+#include "hw_adc.h"
+#include "hw_input.h"
+
+#include <stdlib.h>
#include <string.h>
-#include <cmd_hunk.h>
+//#include <cmd_hunk.h>
-#include "cmd_ctor.h" // MAKE_CMD, REGISTER_CMD
+
+// Define the format string for ADC
+#define ADC_FORMAT_STR "dddd"
// DEBUG: set to 1 to force interactive mode
#define FORCE_INTERACTIVE 1
/// Readline context, used for interactive mode.
static struct RLContext rl_ctx;
-
+uint8_t reg_status_dout;
/**
* Send a NAK asking the host to send the current message again.
*
* \param err human-readable description of the error for debug purposes.
*/
-INLINE void NAK(Serial *ser, const char *err)
+INLINE void NAK(KFile *fd, const char *err)
{
#ifdef _DEBUG
- ser_printf(ser, "NAK \"%s\"\r\n", err);
+ kfile_printf(fd, "NAK \"%s\"\r\n", err);
#else
- ser_printf(ser, "NAK\r\n");
+ kfile_printf(fd, "NAK\r\n");
#endif
}
+static void protocol_prompt(KFile *fd)
+{
+ kfile_print(fd, ">> ");
+}
+
/*
* Print args on s, with format specified in t->result_fmt.
* Return number of valid arguments or -1 in case of error.
*/
-static int protocol_reply(Serial *s, const struct CmdTemplate *t,
+static bool protocol_reply(KFile *fd, const struct CmdTemplate *t,
const parms *args)
{
unsigned short offset = strlen(t->arg_fmt) + 1;
unsigned short nres = strlen(t->result_fmt);
- if (nres > 0)
+ for (unsigned short i = 0; i < nres; ++i)
{
- for (unsigned short i = 0; i < nres; ++i)
+ if (t->result_fmt[i] == 'd')
{
- if (t->result_fmt[i] == 'd')
- {
- ser_printf(s, "%ld", args[offset+i].l);
- }
- else if (t->result_fmt[i] == 's')
- {
- ser_printf(s, "%s ", args[offset+i].s);
- }
- else
- {
- return -1;
- }
+ kfile_printf(fd, " %ld", args[offset+i].l);
+ }
+ else if (t->result_fmt[i] == 's')
+ {
+ kfile_printf(fd, " %s", args[offset+i].s);
+ }
+
+ else
+ {
+ abort();
}
}
- ser_print(s, "\r\n");
- return nres;
+ kfile_printf(fd, "\r\n");
+ return true;
}
-static void protocol_parse(Serial *ser, const char *buf)
+static void protocol_parse(KFile *fd, const char *buf)
{
const struct CmdTemplate *templ;
templ = parser_get_cmd_template(buf);
if (!templ)
{
- NAK(ser, "Invalid command.");
+ kfile_print(fd, "-1 Invalid command.\r\n");
+ protocol_prompt(fd);
return;
}
parms args[PARSER_MAX_ARGS];
- /* Args Check. */
+ /* Args Check. TODO: Handle different case. see doc/PROTOCOL . */
if (!parser_get_cmd_arguments(buf, templ, args))
{
- NAK(ser, "Invalid arguments.");
+ kfile_print(fd, "-2 Invalid arguments.\r\n");
+ protocol_prompt(fd);
return;
}
/* Execute. */
- if (!parser_execute_cmd(templ, args))
+ if(!parser_execute_cmd(templ, args))
{
- NAK(ser, "Command failed.");
+ NAK(fd, "Error in executing command.");
}
- else
+ if (!protocol_reply(fd, templ, args))
{
- if (protocol_reply(ser, templ, args) < 0)
- {
- NAK(ser, "Invalid return format.");
- }
+ NAK(fd, "Invalid return format.");
}
+
+ protocol_prompt(fd);
return;
}
-void protocol_run(Serial *ser)
+void protocol_run(KFile *fd)
{
/**
* \todo to be removed, we could probably access the serial FIFO
if (!interactive)
{
- ser_gets(ser, linebuf, sizeof(linebuf));
+ kfile_gets(fd, linebuf, sizeof(linebuf));
// reset serial port error anyway
- ser_setstatus(ser, 0);
+ kfile_clearerr(fd);
// check message minimum length
if (linebuf[0])
{
- if (linebuf[0] == 0x1B && linebuf[1] == 0x1B) // ESC
- {
- interactive = true;
- ser_printf(ser,
- "Entering interactive mode\r\n");
- }
- else
+ /* If we enter lines beginning with sharp(#)
+ they are stripped out from commands */
+ if(linebuf[0] != '#')
{
- protocol_parse(ser, linebuf);
+ if (linebuf[0] == 0x1B && linebuf[1] == 0x1B) // ESC
+ {
+ interactive = true;
+ kfile_printf(fd, "Entering interactive mode\r\n");
+ }
+ else
+ {
+ protocol_parse(fd, linebuf);
+ }
}
}
}
*/
buf = rl_readline(&rl_ctx);
- if (buf && buf[0] != '\0')
+ /* If we enter lines beginning with sharp(#)
+ they are stripped out from commands */
+ if(buf && buf[0] != '#')
{
- // exit special case to immediately change serial input
- if (!strcmp(buf, "exit") || !strcmp(buf, "quit"))
+ if (buf[0] != '\0')
{
- rl_clear_history(&rl_ctx);
- ser_printf(ser,
- "Leaving interactive mode...\r\n");
- interactive = FORCE_INTERACTIVE;
- }
- else
- {
- //TODO: remove sequence numbers
- linebuf[0] = '0';
- linebuf[1] = ' ';
-
- strncpy(linebuf + 2, buf, sizeof(linebuf) - 3);
- linebuf[sizeof(linebuf) - 1] = '\0';
- protocol_parse(ser, linebuf);
+ // exit special case to immediately change serial input
+ if (!strcmp(buf, "exit") || !strcmp(buf, "quit"))
+ {
+ rl_clear_history(&rl_ctx);
+ kfile_printf(fd, "Leaving interactive mode...\r\n");
+ interactive = FORCE_INTERACTIVE;
+ }
+ else
+ {
+ //TODO: remove sequence numbers
+ linebuf[0] = '0';
+ linebuf[1] = ' ';
+
+ strncpy(linebuf + 2, buf, sizeof(linebuf) - 3);
+ linebuf[sizeof(linebuf) - 1] = '\0';
+ protocol_parse(fd, linebuf);
+ }
}
}
}
*
*/
-/* Version. */
-MAKE_CMD(ver, "", "s",
+MAKE_CMD(ver, "", "ddd",
({
- args[1].s = VERS_TAG;
+ args[1].l = VERS_MAJOR;
+ args[2].l = VERS_MINOR;
+ args[3].l = VERS_REV;
0;
-}))
+}), 0);
-/* Sleep. */
+/* Sleep. Example of declaring function body directly in macro call. */
MAKE_CMD(sleep, "d", "",
({
timer_delay((mtime_t)args[1].l);
0;
-}))
+}), 0)
+
+/* Ping. */
+MAKE_CMD(ping, "", "",
+({
+ //Silence "args not used" warning.
+ (void)args;
+ 0;
+}), 0)
+
+/* Dout */
+MAKE_CMD(dout, "d", "",
+({
+ sipo_putchar((uint8_t)args[1].l);
+
+ //Store status of dout ports.
+ reg_status_dout = (uint8_t)args[1].l;
+ 0;
+}), 0)
+
+/* rdout read the status of out ports.*/
+MAKE_CMD(rdout, "", "d",
+({
+ args[1].l = reg_status_dout;
+ 0;
+}), 0)
+
+/* Doutx sperimentale....... */
+MAKE_CMD(doutx, "d", "",
+ ({
+ sipo_putchar((uint8_t)args[1].l);
+
+ //Store status of dout ports.
+ reg_status_dout = (uint8_t)args[1].l;
+ 0;
+ }), 0)
+
+/* Reset */
+MAKE_CMD(reset, "", "",
+({
+ //Silence "args not used" warning.
+ (void)args;
+ wdt_init(7);
+ wdt_start();
+ 0;
+}), 0)
+
+/* Din */
+MAKE_CMD(din, "", "d",
+({
+ args[1].l = INPUT_GET();
+ 0;
+}), 0)
+
+
+
+/* Ain */
+MAKE_CMD(ain, "", ADC_FORMAT_STR,
+({
+ STATIC_ASSERT((sizeof(ADC_FORMAT_STR) - 1) == ADC_CHANNEL_NUM);
+ for(int i = 0; i < ADC_CHANNEL_NUM; i++)
+ args[i+1].l = adc_read_ai_channel(i);
+
+ 0;
+}), 0)
+
+/* Beep */
+MAKE_CMD(beep, "d", "",
+({
+ buz_beep(args[1].l);
+ 0;
+}), 0)
/* Register commands. */
static void protocol_registerCmds(void)
{
REGISTER_CMD(ver);
REGISTER_CMD(sleep);
+ REGISTER_CMD(ping);
+ REGISTER_CMD(dout);
+ //Set off all dout ports.
+ reg_status_dout = 0;
+ REGISTER_CMD(rdout);
+ REGISTER_CMD(doutx);
+ REGISTER_CMD(reset);
+ REGISTER_CMD(din);
+ REGISTER_CMD(ain);
+ REGISTER_CMD(beep);
}
/* Initialization: readline context, parser and register commands. */
-void protocol_init(Serial *ser)
+void protocol_init(KFile *fd)
{
interactive = FORCE_INTERACTIVE;
rl_init_ctx(&rl_ctx);
- rl_setprompt(&rl_ctx, ">> ");
- rl_sethook_get(&rl_ctx, (getc_hook)ser_getchar, ser);
- rl_sethook_put(&rl_ctx, (putc_hook)ser_putchar, ser);
+ //rl_setprompt(&rl_ctx, ">> ");
+ rl_sethook_get(&rl_ctx, (getc_hook)kfile_getc, fd);
+ rl_sethook_put(&rl_ctx, (putc_hook)kfile_putc, fd);
rl_sethook_match(&rl_ctx, parser_rl_match, NULL);
+ rl_sethook_clear(&rl_ctx, (clear_hook)kfile_clearerr,fd);
parser_init();
protocol_registerCmds();
+
+ protocol_prompt(fd);
}