Sistema l'errore da me commesso in fase di conversione...
[bertos.git] / appconfig.h
old mode 100755 (executable)
new mode 100644 (file)
index a30746d..c68cf40
@@ -1,8 +1,8 @@
-/*!
+/**
  * \file
  * <!--
- * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
+ * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
+ * This file is part of DevLib - See README.devlib for information.
  * -->
  *
  * \brief DevLib configuration options
 
 /*#*
  *#* $Log$
+ *#* Revision 1.16  2007/02/12 15:29:41  asterix
+ *#* Add CONFIG_RANDPOOL_TIMER macro to swich on or off timer support in randpool.
+ *#*
+ *#* Revision 1.15  2007/02/08 14:20:35  asterix
+ *#* Add CONFIG_SIZE_ENTROPY_POOL.
+ *#*
+ *#* Revision 1.14  2007/02/06 11:37:26  asterix
+ *#* Add CONFIG_MD2_STD_PERM for use standard permutation in MD2.
+ *#*
+ *#* Revision 1.13  2007/01/31 13:49:40  asterix
+ *#* Add config size block for MD2
+ *#*
+ *#* Revision 1.3  2006/09/13 18:29:22  bernie
+ *#* Add a few missing CONFIG_ definitions.
+ *#*
+ *#* Revision 1.2  2006/07/19 12:56:24  bernie
+ *#* Convert to new Doxygen style.
+ *#*
+ *#* Revision 1.1  2006/05/18 00:40:43  bernie
+ *#* Rename appconfig.h to appconfig_common.h.
+ *#*
+ *#* Revision 1.11  2006/04/11 00:08:53  bernie
+ *#* Add smooth scrolling for menus.
+ *#*
+ *#* Revision 1.10  2006/03/22 09:48:51  bernie
+ *#* Add a few more config options.
+ *#*
+ *#* Revision 1.9  2006/02/24 00:27:35  bernie
+ *#* Enable kernel and fix Doxygen markup.
+ *#*
+ *#* Revision 1.8  2006/02/21 16:06:05  bernie
+ *#* Update copyright info.
+ *#*
+ *#* Revision 1.7  2006/02/17 22:28:19  bernie
+ *#* Add missing UART definitions.
+ *#*
+ *#* Revision 1.6  2006/02/15 09:12:56  bernie
+ *#* Switch to BITMAP_FMT_PLANAR_V_LSB.
+ *#*
  *#* Revision 1.5  2006/02/10 12:34:33  bernie
  *#* Add missing config options for gfx and kbd.
  *#*
  *#*
  *#* Revision 1.1  2005/11/04 17:42:12  bernie
  *#* Move cfg/config.h to appconfig.h.
- *#*
- *#* Revision 1.1  2005/04/11 19:04:13  bernie
- *#* Move top-level headers to cfg/ subdir.
- *#*
- *#* Revision 1.5  2004/12/08 08:04:28  bernie
- *#* Add missing config options.
- *#*
- *#* Revision 1.4  2004/08/25 14:12:08  rasky
- *#* Aggiornato il comment block dei log RCS
- *#*
- *#* Revision 1.3  2004/08/24 14:30:11  bernie
- *#* Use new-style config macros for drv/timer.c
- *#*
- *#* Revision 1.2  2004/08/05 18:46:52  bernie
- *#* Documentation improvements.
- *#*
- *#* Revision 1.1  2004/07/29 23:34:32  bernie
- *#* Add template configuration file.
- *#*
  *#*/
 
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
+#ifndef APPCONFIG_H
+#define APPCONFIG_H
 
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
 #define CONFIG_KDEBUG_BAUDRATE  19200
 
-/*!
+/**
  * printf()-style formatter configuration.
  *
  * \sa PRINTF_DISABLED
  */
 #define CONFIG_PRINTF PRINTF_FULL
 
-/*!
- * Multithreading kernel
+/**
+ * Multithreading kernel.
  *
- * /sa config_kernel.h
+ * \sa config_kern.h
  */
-#define CONFIG_KERNEL 0
+#define CONFIG_KERNEL 1
 
-/*!
+/**
  * \name Serial driver parameters
  * \{
  */
-       /*! Size of the outbound FIFO buffer for all ports (bytes) */
-       #define CONFIG_SER_TXBUFSIZE  32
-       /*! Size of the inbound FIFO buffer for all ports (bytes) */
-       #define CONFIG_SER_RXBUFSIZE  64
+       /** [bytes] Size of the outbound FIFO buffer for port 0. */
+       #define CONFIG_UART0_TXBUFSIZE  32
+
+       /** [bytes] Size of the inbound FIFO buffer for port 0. */
+       #define CONFIG_UART0_RXBUFSIZE  64
+
+       /** [bytes] Size of the outbound FIFO buffer for port 1. */
+       #define CONFIG_UART1_TXBUFSIZE  32
+
+       /** [bytes] Size of the inbound FIFO buffer for port 1. */
+       #define CONFIG_UART1_RXBUFSIZE  64
+
+       /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+       #define CONFIG_SPI_TXBUFSIZE    16
+
+       /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+       #define CONFIG_SPI_RXBUFSIZE    32
+
+       /** SPI data order (AVR only). */
+       #define CONFIG_SPI_DATA_ORDER   SER_MSB_FIRST
 
-       /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+       /** SPI clock division factor (AVR only). */
+       #define CONFIG_SPI_CLOCK_DIV    16
+
+       /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+       #define CONFIG_SPI_CLOCK_POL    0
+
+       /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+       #define CONFIG_SPI_CLOCK_PHASE  0
+
+       /** Default transmit timeout (ms). Set to -1 to disable timeout support */
        #define CONFIG_SER_TXTIMEOUT    -1
-       /*! Default receive timeout (ms). Set to -1 to disable timeout support */
+
+       /** Default receive timeout (ms). Set to -1 to disable timeout support */
        #define CONFIG_SER_RXTIMEOUT    -1
 
-       /*! Use RTS/CTS handshake */
+       /** Use RTS/CTS handshake */
        #define CONFIG_SER_HWHANDSHAKE   0
 
-       /*! Default baud rate (set to 0 to disable) */
+       /** Default baud rate (set to 0 to disable) */
        #define CONFIG_SER_DEFBAUDRATE   0
 
-       /*! Enable ser_gets() and ser_gets_echo() */
+       /** Enable ser_gets() and ser_gets_echo() */
        #define CONFIG_SER_GETS          0
 
-       /*!
+       /** Enable second serial port in emulator. */
+       #define CONFIG_EMUL_UART1        0
+
+       /**
         * Transmit always something on serial port 0 TX
         * to avoid interference when sending burst of data,
         * using AVR multiprocessor serial mode
        #define CONFIG_SER_STROBE        0
 /*\}*/
 
-/*!
- * \name KBus configuration
- * \{
- */
-       /*! Board address for KBus */
-       #define CONFIG_KBUS_ADDR KBUS_ADDR_FOOBAR
-
-       /*! Disable KBUS escaping support */
-       #define CONFIG_KBUS_ESCAPE  0
-
-       /*! Serial port for internal KBUS communication */
-       #define CONFIG_KBUS_PORT  0
-
-       /*! Serial port speed for KBus communication */
-       #define CONFIG_KBUS_BAUDRATE  19200
-/*\}*/
-
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
 #define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
 
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0
 
-//! Enable watchdog timer.
+/// Enable ADS strobe.
+#define CONFIG_ADC_STROBE  0
+
+/// Enable watchdog timer.
 #define CONFIG_WATCHDOG  1
 
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
 
 /// Select bitmap pixel format.
-#define CONFIG_BITMAP_FMT  BITMAP_FMT_PLANAR_H_MSB
+#define CONFIG_BITMAP_FMT  BITMAP_FMT_PLANAR_V_LSB
 
 /// Enable line clipping algorithm.
-#define CONFIG_GFX_CLIPPING 1
+#define CONFIG_GFX_CLIPPING  1
 
 /// Enable text rendering in bitmaps.
-#define CONFIG_GFX_TEXT 1
+#define CONFIG_GFX_TEXT  1
 
 /// Enable virtual coordinate system.
-#define CONFIG_GFX_VCOORDS 1
+#define CONFIG_GFX_VCOORDS  1
 
 /// Keyboard polling method
 #define CONFIG_KBD_POLL  KBD_POLL_SOFTINT
 
-#endif /* CONFIG_COMMON_H */
+/// Enable keyboard event delivery to observers
+#define CONFIG_KBD_OBSERVER  0
+
+/// Enable key beeps
+#define CONFIG_KBD_BEEP  1
+
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS  1
+
+/**
+ * \name Type for the chart dataset
+ * \{
+ */
+#define CONFIG_CHART_TYPE_X uint8_t
+#define CONFIG_CHART_TYPE_Y uint8_t
+/*\}*/
+
+/// Enable button bar behind menus
+#define CONFIG_MENU_MENUBAR  0
+
+/// Enable smooth scrolling in menus
+#define CONFIG_MENU_SMOOTH  1
+
+/// Size of block for MD2 algorithm.
+#define CONFIG_MD2_BLOCK_LEN 16
+
+/// Use standard permutation in MD2 algorithm.
+#define CONFIG_MD2_STD_PERM 0 
+
+/// Define a size, in byte, of entropy pool.
+#define CONFIG_SIZE_ENTROPY_POOL 64
+
+/// Turn on or off timer support in Randpool.
+#define CONFIG_RANDPOOL_TIMER 1
+
+#endif /* APPCONFIG_H */