-/*!
+/**
* \file
* <!--
- * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
+ * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
+ * This file is part of DevLib - See README.devlib for information.
* -->
*
* \brief DevLib configuration options
/*#*
*#* $Log$
+ *#* Revision 1.16 2007/02/12 15:29:41 asterix
+ *#* Add CONFIG_RANDPOOL_TIMER macro to swich on or off timer support in randpool.
+ *#*
+ *#* Revision 1.15 2007/02/08 14:20:35 asterix
+ *#* Add CONFIG_SIZE_ENTROPY_POOL.
+ *#*
+ *#* Revision 1.14 2007/02/06 11:37:26 asterix
+ *#* Add CONFIG_MD2_STD_PERM for use standard permutation in MD2.
+ *#*
+ *#* Revision 1.13 2007/01/31 13:49:40 asterix
+ *#* Add config size block for MD2
+ *#*
+ *#* Revision 1.3 2006/09/13 18:29:22 bernie
+ *#* Add a few missing CONFIG_ definitions.
+ *#*
+ *#* Revision 1.2 2006/07/19 12:56:24 bernie
+ *#* Convert to new Doxygen style.
+ *#*
+ *#* Revision 1.1 2006/05/18 00:40:43 bernie
+ *#* Rename appconfig.h to appconfig_common.h.
+ *#*
+ *#* Revision 1.11 2006/04/11 00:08:53 bernie
+ *#* Add smooth scrolling for menus.
+ *#*
+ *#* Revision 1.10 2006/03/22 09:48:51 bernie
+ *#* Add a few more config options.
+ *#*
+ *#* Revision 1.9 2006/02/24 00:27:35 bernie
+ *#* Enable kernel and fix Doxygen markup.
+ *#*
+ *#* Revision 1.8 2006/02/21 16:06:05 bernie
+ *#* Update copyright info.
+ *#*
+ *#* Revision 1.7 2006/02/17 22:28:19 bernie
+ *#* Add missing UART definitions.
+ *#*
+ *#* Revision 1.6 2006/02/15 09:12:56 bernie
+ *#* Switch to BITMAP_FMT_PLANAR_V_LSB.
+ *#*
*#* Revision 1.5 2006/02/10 12:34:33 bernie
*#* Add missing config options for gfx and kbd.
*#*
*#*
*#* Revision 1.1 2005/11/04 17:42:12 bernie
*#* Move cfg/config.h to appconfig.h.
- *#*
- *#* Revision 1.1 2005/04/11 19:04:13 bernie
- *#* Move top-level headers to cfg/ subdir.
- *#*
- *#* Revision 1.5 2004/12/08 08:04:28 bernie
- *#* Add missing config options.
- *#*
- *#* Revision 1.4 2004/08/25 14:12:08 rasky
- *#* Aggiornato il comment block dei log RCS
- *#*
- *#* Revision 1.3 2004/08/24 14:30:11 bernie
- *#* Use new-style config macros for drv/timer.c
- *#*
- *#* Revision 1.2 2004/08/05 18:46:52 bernie
- *#* Documentation improvements.
- *#*
- *#* Revision 1.1 2004/07/29 23:34:32 bernie
- *#* Add template configuration file.
- *#*
*#*/
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
+#ifndef APPCONFIG_H
+#define APPCONFIG_H
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
#define CONFIG_KDEBUG_BAUDRATE 19200
-/*!
+/**
* printf()-style formatter configuration.
*
* \sa PRINTF_DISABLED
*/
#define CONFIG_PRINTF PRINTF_FULL
-/*!
- * Multithreading kernel
+/**
+ * Multithreading kernel.
*
- * /sa config_kernel.h
+ * \sa config_kern.h
*/
-#define CONFIG_KERNEL 0
+#define CONFIG_KERNEL 1
-/*!
+/**
* \name Serial driver parameters
* \{
*/
- /*! Size of the outbound FIFO buffer for all ports (bytes) */
- #define CONFIG_SER_TXBUFSIZE 32
- /*! Size of the inbound FIFO buffer for all ports (bytes) */
- #define CONFIG_SER_RXBUFSIZE 64
+ /** [bytes] Size of the outbound FIFO buffer for port 0. */
+ #define CONFIG_UART0_TXBUFSIZE 32
+
+ /** [bytes] Size of the inbound FIFO buffer for port 0. */
+ #define CONFIG_UART0_RXBUFSIZE 64
+
+ /** [bytes] Size of the outbound FIFO buffer for port 1. */
+ #define CONFIG_UART1_TXBUFSIZE 32
+
+ /** [bytes] Size of the inbound FIFO buffer for port 1. */
+ #define CONFIG_UART1_RXBUFSIZE 64
+
+ /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+ #define CONFIG_SPI_TXBUFSIZE 16
+
+ /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+ #define CONFIG_SPI_RXBUFSIZE 32
+
+ /** SPI data order (AVR only). */
+ #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
- /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+ /** SPI clock division factor (AVR only). */
+ #define CONFIG_SPI_CLOCK_DIV 16
+
+ /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+ #define CONFIG_SPI_CLOCK_POL 0
+
+ /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+ #define CONFIG_SPI_CLOCK_PHASE 0
+
+ /** Default transmit timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_TXTIMEOUT -1
- /*! Default receive timeout (ms). Set to -1 to disable timeout support */
+
+ /** Default receive timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_RXTIMEOUT -1
- /*! Use RTS/CTS handshake */
+ /** Use RTS/CTS handshake */
#define CONFIG_SER_HWHANDSHAKE 0
- /*! Default baud rate (set to 0 to disable) */
+ /** Default baud rate (set to 0 to disable) */
#define CONFIG_SER_DEFBAUDRATE 0
- /*! Enable ser_gets() and ser_gets_echo() */
+ /** Enable ser_gets() and ser_gets_echo() */
#define CONFIG_SER_GETS 0
- /*!
+ /** Enable second serial port in emulator. */
+ #define CONFIG_EMUL_UART1 0
+
+ /**
* Transmit always something on serial port 0 TX
* to avoid interference when sending burst of data,
* using AVR multiprocessor serial mode
#define CONFIG_SER_STROBE 0
/*\}*/
-/*!
- * \name KBus configuration
- * \{
- */
- /*! Board address for KBus */
- #define CONFIG_KBUS_ADDR KBUS_ADDR_FOOBAR
-
- /*! Disable KBUS escaping support */
- #define CONFIG_KBUS_ESCAPE 0
-
- /*! Serial port for internal KBUS communication */
- #define CONFIG_KBUS_PORT 0
-
- /*! Serial port speed for KBus communication */
- #define CONFIG_KBUS_BAUDRATE 19200
-/*\}*/
-
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
#define CONFIG_TIMER_STROBE 0
-//! Enable watchdog timer.
+/// Enable ADS strobe.
+#define CONFIG_ADC_STROBE 0
+
+/// Enable watchdog timer.
#define CONFIG_WATCHDOG 1
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
#define CONFIG_EEPROM_TYPE EEPROM_24XX256
/// Select bitmap pixel format.
-#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_H_MSB
+#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
/// Enable line clipping algorithm.
-#define CONFIG_GFX_CLIPPING 1
+#define CONFIG_GFX_CLIPPING 1
/// Enable text rendering in bitmaps.
-#define CONFIG_GFX_TEXT 1
+#define CONFIG_GFX_TEXT 1
/// Enable virtual coordinate system.
-#define CONFIG_GFX_VCOORDS 1
+#define CONFIG_GFX_VCOORDS 1
/// Keyboard polling method
#define CONFIG_KBD_POLL KBD_POLL_SOFTINT
-#endif /* CONFIG_COMMON_H */
+/// Enable keyboard event delivery to observers
+#define CONFIG_KBD_OBSERVER 0
+
+/// Enable key beeps
+#define CONFIG_KBD_BEEP 1
+
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS 1
+
+/**
+ * \name Type for the chart dataset
+ * \{
+ */
+#define CONFIG_CHART_TYPE_X uint8_t
+#define CONFIG_CHART_TYPE_Y uint8_t
+/*\}*/
+
+/// Enable button bar behind menus
+#define CONFIG_MENU_MENUBAR 0
+
+/// Enable smooth scrolling in menus
+#define CONFIG_MENU_SMOOTH 1
+
+/// Size of block for MD2 algorithm.
+#define CONFIG_MD2_BLOCK_LEN 16
+
+/// Use standard permutation in MD2 algorithm.
+#define CONFIG_MD2_STD_PERM 0
+
+/// Define a size, in byte, of entropy pool.
+#define CONFIG_SIZE_ENTROPY_POOL 64
+
+/// Turn on or off timer support in Randpool.
+#define CONFIG_RANDPOOL_TIMER 1
+
+#endif /* APPCONFIG_H */