/**
* \file
* <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
* Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
* -->
*
* \brief DevLib configuration options
* \author Stefano Fedrigo <aleph@develer.com>
*/
-/*#*
- *#* $Log$
- *#* Revision 1.2 2006/07/19 12:56:24 bernie
- *#* Convert to new Doxygen style.
- *#*
- *#* Revision 1.1 2006/05/18 00:40:43 bernie
- *#* Rename appconfig.h to appconfig_common.h.
- *#*
- *#* Revision 1.11 2006/04/11 00:08:53 bernie
- *#* Add smooth scrolling for menus.
- *#*
- *#* Revision 1.10 2006/03/22 09:48:51 bernie
- *#* Add a few more config options.
- *#*
- *#* Revision 1.9 2006/02/24 00:27:35 bernie
- *#* Enable kernel and fix Doxygen markup.
- *#*
- *#* Revision 1.8 2006/02/21 16:06:05 bernie
- *#* Update copyright info.
- *#*
- *#* Revision 1.7 2006/02/17 22:28:19 bernie
- *#* Add missing UART definitions.
- *#*
- *#* Revision 1.6 2006/02/15 09:12:56 bernie
- *#* Switch to BITMAP_FMT_PLANAR_V_LSB.
- *#*
- *#* Revision 1.5 2006/02/10 12:34:33 bernie
- *#* Add missing config options for gfx and kbd.
- *#*
- *#* Revision 1.4 2006/01/23 23:12:27 bernie
- *#* Enable CONFIG_GFX_VCOORDS.
- *#*
- *#* Revision 1.3 2006/01/17 02:30:06 bernie
- *#* Add new config vars.
- *#*
- *#* Revision 1.2 2005/11/27 03:04:57 bernie
- *#* CONFIG_WATCHDOG: New config option.
- *#*
- *#* Revision 1.1 2005/11/04 17:42:12 bernie
- *#* Move cfg/config.h to appconfig.h.
- *#*/
-
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
+#ifndef APPCONFIG_COMMON_H
+#define APPCONFIG_COMMON_H
/** Baud-rate for the kdebug console */
#define CONFIG_KDEBUG_BAUDRATE 19200
*
* \sa config_kern.h
*/
-#define CONFIG_KERNEL 1
+#define CONFIG_KERNEL 0
/**
* \name Serial driver parameters
/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_RXBUFSIZE 32
+ /** SPI data order (AVR only). */
+ #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
+
+ /** SPI clock division factor (AVR only). */
+ #define CONFIG_SPI_CLOCK_DIV 16
+
+ /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+ #define CONFIG_SPI_CLOCK_POL 0
+
+ /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+ #define CONFIG_SPI_CLOCK_PHASE 0
+
/** Default transmit timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_TXTIMEOUT -1
/// Debug timer interrupt using a strobe pin.
#define CONFIG_TIMER_STROBE 0
+/// Enable ADS strobe.
+#define CONFIG_ADC_STROBE 0
+
/// Enable watchdog timer.
-#define CONFIG_WATCHDOG 1
+#define CONFIG_WATCHDOG 0
/// EEPROM type for drv/eeprom.c
#define CONFIG_EEPROM_TYPE EEPROM_24XX256
#define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB
/// Enable line clipping algorithm.
-#define CONFIG_GFX_CLIPPING 1
+#define CONFIG_GFX_CLIPPING 1
/// Enable text rendering in bitmaps.
-#define CONFIG_GFX_TEXT 1
+#define CONFIG_GFX_TEXT 1
/// Enable virtual coordinate system.
-#define CONFIG_GFX_VCOORDS 1
+#define CONFIG_GFX_VCOORDS 1
/// Keyboard polling method
#define CONFIG_KBD_POLL KBD_POLL_SOFTINT
#define CONFIG_KBD_OBSERVER 0
/// Enable key beeps
-#define CONFIG_KBD_BEEP 1
+#define CONFIG_KBD_BEEP 1
+
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS 1
/**
* \name Type for the chart dataset
/// Enable smooth scrolling in menus
#define CONFIG_MENU_SMOOTH 1
-#endif /* CONFIG_COMMON_H */
+/// Size of block for MD2 algorithm.
+#define CONFIG_MD2_BLOCK_LEN 16
+
+/// Use standard permutation in MD2 algorithm.
+#define CONFIG_MD2_STD_PERM 0
+
+/// Define a size, in byte, of entropy pool.
+#define CONFIG_SIZE_ENTROPY_POOL 64
+
+/// Turn on or off timer support in Randpool.
+#define CONFIG_RANDPOOL_TIMER 1
+
+#endif /* APPCONFIG_H */