/**
* \file
* <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
* Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
* -->
*
* \brief DevLib configuration options
* \author Stefano Fedrigo <aleph@develer.com>
*/
-/*#*
- *#* $Log$
- *#* Revision 1.4 2007/09/18 10:16:59 batt
- *#* Merge from triface.
- *#*
- *#* Revision 1.3 2006/09/13 18:29:22 bernie
- *#* Add a few missing CONFIG_ definitions.
- *#*
- *#* Revision 1.2 2006/07/19 12:56:24 bernie
- *#* Convert to new Doxygen style.
- *#*
- *#* Revision 1.1 2006/05/18 00:40:43 bernie
- *#* Rename appconfig.h to appconfig_common.h.
- *#*
- *#* Revision 1.11 2006/04/11 00:08:53 bernie
- *#* Add smooth scrolling for menus.
- *#*
- *#* Revision 1.10 2006/03/22 09:48:51 bernie
- *#* Add a few more config options.
- *#*
- *#* Revision 1.9 2006/02/24 00:27:35 bernie
- *#* Enable kernel and fix Doxygen markup.
- *#*
- *#* Revision 1.8 2006/02/21 16:06:05 bernie
- *#* Update copyright info.
- *#*
- *#* Revision 1.7 2006/02/17 22:28:19 bernie
- *#* Add missing UART definitions.
- *#*
- *#* Revision 1.6 2006/02/15 09:12:56 bernie
- *#* Switch to BITMAP_FMT_PLANAR_V_LSB.
- *#*
- *#* Revision 1.5 2006/02/10 12:34:33 bernie
- *#* Add missing config options for gfx and kbd.
- *#*
- *#* Revision 1.4 2006/01/23 23:12:27 bernie
- *#* Enable CONFIG_GFX_VCOORDS.
- *#*
- *#* Revision 1.3 2006/01/17 02:30:06 bernie
- *#* Add new config vars.
- *#*
- *#* Revision 1.2 2005/11/27 03:04:57 bernie
- *#* CONFIG_WATCHDOG: New config option.
- *#*
- *#* Revision 1.1 2005/11/04 17:42:12 bernie
- *#* Move cfg/config.h to appconfig.h.
- *#*/
-
#ifndef APPCONFIG_COMMON_H
#define APPCONFIG_COMMON_H
+/** kdebug console */
+#define CONFIG_KDEBUG_PORT 0
+
/** Baud-rate for the kdebug console */
#define CONFIG_KDEBUG_BAUDRATE 19200
#define CONFIG_UART1_TXBUFSIZE 32
/** [bytes] Size of the inbound FIFO buffer for port 1. */
- #define CONFIG_UART1_RXBUFSIZE 64
+ #define CONFIG_UART1_RXBUFSIZE CONFIG_PROTOCOL_BUFLEN
+
+ /** [bytes] Size of the outbound FIFO buffer for SPI port 0. */
+ #define CONFIG_SPI0_TXBUFSIZE 16
+
+ /** [bytes] Size of the inbound FIFO buffer for SPI port 0. */
+ #define CONFIG_SPI0_RXBUFSIZE 32
- /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
- #define CONFIG_SPI_TXBUFSIZE 16
+ /** [bytes] Size of the outbound FIFO buffer for SPI port 1. */
+ #define CONFIG_SPI1_TXBUFSIZE 16
- /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
- #define CONFIG_SPI_RXBUFSIZE 32
+ /** [bytes] Size of the inbound FIFO buffer for SPI port 1. */
+ #define CONFIG_SPI1_RXBUFSIZE 32
/** SPI data order (AVR only). */
#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
#define CONFIG_ADC_STROBE 0
/// Enable watchdog timer.
-#define CONFIG_WATCHDOG 1
+#define CONFIG_WATCHDOG 0
/// EEPROM type for drv/eeprom.c
#define CONFIG_EEPROM_TYPE EEPROM_24XX256
/// Enable smooth scrolling in menus
#define CONFIG_MENU_SMOOTH 1
-#endif /* APPCONFIG_COMMON_H */
+/// Size of block for MD2 algorithm.
+#define CONFIG_MD2_BLOCK_LEN 16
+
+/// Use standard permutation in MD2 algorithm.
+#define CONFIG_MD2_STD_PERM 0
+
+/// Define a size, in byte, of entropy pool.
+#define CONFIG_SIZE_ENTROPY_POOL 64
+
+/// Turn on or off timer support in Randpool.
+#define CONFIG_RANDPOOL_TIMER 1
+
+/**
+ * ADC timing setting parameter
+ *
+ * - CONFIG_ADC_CLOCK is frequency clock for ADC conversion.
+ * - CONFIG_ADC_STARTUP_TIME minimum time for startup a conversion in micro second.
+ * - CONFIG_ADC_SHTIME minimum time for sample and hold in nano second.
+ * \{
+ */
+#define CONFIG_ADC_CLOCK 4800000UL
+#define CONFIG_ADC_STARTUP_TIME 20
+#define CONFIG_ADC_SHTIME 834
+/* \} */
+
+#endif /* APPCONFIG_H */