-/*!
+/**
* \file
* <!--
* Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
/*#*
*#* $Log$
+ *#* Revision 1.2 2006/07/19 12:56:24 bernie
+ *#* Convert to new Doxygen style.
+ *#*
*#* Revision 1.1 2006/05/18 00:40:43 bernie
*#* Rename appconfig.h to appconfig_common.h.
*#*
#ifndef CONFIG_COMMON_H
#define CONFIG_COMMON_H
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
#define CONFIG_KDEBUG_BAUDRATE 19200
-/*!
+/**
* printf()-style formatter configuration.
*
* \sa PRINTF_DISABLED
*/
#define CONFIG_PRINTF PRINTF_FULL
-/*!
+/**
* Multithreading kernel.
*
* \sa config_kern.h
*/
#define CONFIG_KERNEL 1
-/*!
+/**
* \name Serial driver parameters
* \{
*/
- /*! [bytes] Size of the outbound FIFO buffer for port 0. */
+ /** [bytes] Size of the outbound FIFO buffer for port 0. */
#define CONFIG_UART0_TXBUFSIZE 32
- /*! [bytes] Size of the inbound FIFO buffer for port 0. */
+ /** [bytes] Size of the inbound FIFO buffer for port 0. */
#define CONFIG_UART0_RXBUFSIZE 64
- /*! [bytes] Size of the outbound FIFO buffer for port 1. */
+ /** [bytes] Size of the outbound FIFO buffer for port 1. */
#define CONFIG_UART1_TXBUFSIZE 32
- /*! [bytes] Size of the inbound FIFO buffer for port 1. */
+ /** [bytes] Size of the inbound FIFO buffer for port 1. */
#define CONFIG_UART1_RXBUFSIZE 64
- /*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+ /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_TXBUFSIZE 16
- /*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+ /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
#define CONFIG_SPI_RXBUFSIZE 32
- /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+ /** Default transmit timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_TXTIMEOUT -1
- /*! Default receive timeout (ms). Set to -1 to disable timeout support */
+ /** Default receive timeout (ms). Set to -1 to disable timeout support */
#define CONFIG_SER_RXTIMEOUT -1
- /*! Use RTS/CTS handshake */
+ /** Use RTS/CTS handshake */
#define CONFIG_SER_HWHANDSHAKE 0
- /*! Default baud rate (set to 0 to disable) */
+ /** Default baud rate (set to 0 to disable) */
#define CONFIG_SER_DEFBAUDRATE 0
- /*! Enable ser_gets() and ser_gets_echo() */
+ /** Enable ser_gets() and ser_gets_echo() */
#define CONFIG_SER_GETS 0
/** Enable second serial port in emulator. */
#define CONFIG_EMUL_UART1 0
- /*!
+ /**
* Transmit always something on serial port 0 TX
* to avoid interference when sending burst of data,
* using AVR multiprocessor serial mode
#define CONFIG_SER_STROBE 0
/*\}*/
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
#define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
#define CONFIG_TIMER_STROBE 0
-//! Enable watchdog timer.
+/// Enable watchdog timer.
#define CONFIG_WATCHDOG 1
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
#define CONFIG_EEPROM_TYPE EEPROM_24XX256
/// Select bitmap pixel format.
/// Enable key beeps
#define CONFIG_KBD_BEEP 1
-/*!
+/**
* \name Type for the chart dataset
* \{
*/