Convert to new Doxygen style.

[bertos.git] / appconfig_common.h

diff --git a/appconfig_common.h b/appconfig_common.h
index fc6a0b2248bb2c3830396fe7a768c10ffe0ae1ab..ee3100246cc6a271f51e7b5d611a47e412307eae 100755 (executable)
--- a/appconfig_common.h
+++ b/appconfig_common.h
@@ -1,4 +1,4 @@
-/*!
+/**
  * \file
  * <!--
  * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
@@ -46,6 +46,9 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.2  2006/07/19 12:56:24  bernie
+ *#* Convert to new Doxygen style.
+ *#*
  *#* Revision 1.1  2006/05/18 00:40:43  bernie
  *#* Rename appconfig.h to appconfig_common.h.
  *#*
@@ -86,10 +89,10 @@
 #ifndef CONFIG_COMMON_H
 #define CONFIG_COMMON_H
 
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
 #define CONFIG_KDEBUG_BAUDRATE  19200
 
-/*!
+/**
  * printf()-style formatter configuration.
  *
  * \sa PRINTF_DISABLED
@@ -100,54 +103,54 @@
  */
 #define CONFIG_PRINTF PRINTF_FULL
 
-/*!
+/**
  * Multithreading kernel.
  *
  * \sa config_kern.h
  */
 #define CONFIG_KERNEL 1
 
-/*!
+/**
  * \name Serial driver parameters
  * \{
  */
-       /*! [bytes] Size of the outbound FIFO buffer for port 0. */
+       /** [bytes] Size of the outbound FIFO buffer for port 0. */
        #define CONFIG_UART0_TXBUFSIZE  32
 
-       /*! [bytes] Size of the inbound FIFO buffer for port 0. */
+       /** [bytes] Size of the inbound FIFO buffer for port 0. */
        #define CONFIG_UART0_RXBUFSIZE  64
 
-       /*! [bytes] Size of the outbound FIFO buffer for port 1. */
+       /** [bytes] Size of the outbound FIFO buffer for port 1. */
        #define CONFIG_UART1_TXBUFSIZE  32
 
-       /*! [bytes] Size of the inbound FIFO buffer for port 1. */
+       /** [bytes] Size of the inbound FIFO buffer for port 1. */
        #define CONFIG_UART1_RXBUFSIZE  64
 
-       /*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+       /** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
        #define CONFIG_SPI_TXBUFSIZE    16
 
-       /*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+       /** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
        #define CONFIG_SPI_RXBUFSIZE    32
 
-       /*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+       /** Default transmit timeout (ms). Set to -1 to disable timeout support */
        #define CONFIG_SER_TXTIMEOUT    -1
 
-       /*! Default receive timeout (ms). Set to -1 to disable timeout support */
+       /** Default receive timeout (ms). Set to -1 to disable timeout support */
        #define CONFIG_SER_RXTIMEOUT    -1
 
-       /*! Use RTS/CTS handshake */
+       /** Use RTS/CTS handshake */
        #define CONFIG_SER_HWHANDSHAKE   0
 
-       /*! Default baud rate (set to 0 to disable) */
+       /** Default baud rate (set to 0 to disable) */
        #define CONFIG_SER_DEFBAUDRATE   0
 
-       /*! Enable ser_gets() and ser_gets_echo() */
+       /** Enable ser_gets() and ser_gets_echo() */
        #define CONFIG_SER_GETS          0
 
        /** Enable second serial port in emulator. */
        #define CONFIG_EMUL_UART1        0
 
-       /*!
+       /**
         * Transmit always something on serial port 0 TX
         * to avoid interference when sending burst of data,
         * using AVR multiprocessor serial mode
@@ -157,16 +160,16 @@
        #define CONFIG_SER_STROBE        0
 /*\}*/
 
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
 #define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
 
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0
 
-//! Enable watchdog timer.
+/// Enable watchdog timer.
 #define CONFIG_WATCHDOG  1
 
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
 
 /// Select bitmap pixel format.
@@ -190,7 +193,7 @@
 /// Enable key beeps
 #define CONFIG_KBD_BEEP 1
 
-/*!
+/**
  * \name Type for the chart dataset
  * \{
  */