Add other flash info for sam3 series.

[bertos.git] / bertos / cfg / cfg_wm8731.h

diff --git a/bertos/cfg/cfg_wm8731.h b/bertos/cfg/cfg_wm8731.h
index aa938f4a8b3b4ccac735ba7cdec298d9eb7503b7..76280b6541b2aa9c7e92494d86ad33f7ffd8fc36 100644 (file)
--- a/bertos/cfg/cfg_wm8731.h
+++ b/bertos/cfg/cfg_wm8731.h
@@ -53,4 +53,81 @@
 #define WM8731_LOG_FORMAT     LOG_FMT_TERSE
 
 
+/**
+ * Digital control: ADC High pass filter
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DAPC     0
+
+
+/**
+ * Digital control: De-emphasis control
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_deemp"
+ */
+#define CONFIG_WM8731_DEEMP     WM8731_DEEMP_DISABLE
+
+/**
+ * Digital control: DAC soft mute control
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_DACMU     0
+
+
+/**
+ * Analog control: Microphone boost
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MICBOOST     0
+
+/**
+ * Analog control: Microphone/Line Input select to ADC
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_insel"
+ */
+#define CONFIG_WM8731_INSEL     WM8731_INSEL_MIC
+
+
+/**
+ * Analog control: out selector
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_bypass"
+ */
+#define CONFIG_WM8731_BYPASS     WM8731_DACSEL
+
+/**
+ * Analog control: Side tone attenuation
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_sideatt"
+ */
+#define CONFIG_WM8731_SIDEATT     WM8731_SIDEATT_6dB
+
+
+/**
+ * Digital Audio interface format.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_fmt"
+ */
+#define CONFIG_WM8731_INTERFACE_FORMAT    WM8731_FORMAT_I2S
+
+/**
+ * Digital Audio data bit length.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "wm8731_databit"
+ */
+#define CONFIG_WM8731_IWL_BITS            WM8731_IWL_16_BIT
+
+/**
+ * Enable Master mode.
+ * $WIZ$ type = "boolean"
+ */
+#define CONFIG_WM8731_MS     0
+
+
+/**
+ * Data sampling rate, refer to datasheet for this value.
+ * $WIZ$ type = "hex"
+ */
+#define CONFIG_WM8731_SAMPLING_RATES     0x6
+
 #endif /* CFG_WM8731_H */