Refactor makefile variables architecture.

[bertos.git] / bertos / cpu / arm / info / at91sam7.common

diff --git a/bertos/cpu/arm/info/at91sam7.common b/bertos/cpu/arm/info/at91sam7.common
index 58e3209c6b133d3e24262f626ba57fc94a9cf581..942d84e9a500f141b217930afd2bb2bdd7e41731 100644 (file)
--- a/bertos/cpu/arm/info/at91sam7.common
+++ b/bertos/cpu/arm/info/at91sam7.common
@@ -54,33 +54,32 @@ TOOLCHAIN = "arm"
 # If we use the GCC compiler we should pass some flags.
 CORE_CPU = "arm7tdmi"
 
+# CPU type used for flashing/debugging
+MK_PROGRAMMER_CPU = "at91sam7"
+
 # Name of the flag used by the build system to pass to the compiler the CPU type.
-CPU_FLAG_NAME = "CPU"
+MK_CPU = CORE_CPU
 
 # CPU default clock frequency
 CPU_DEFAULT_FREQ = "48023000UL"
 
 # Special CPU related tags.
-CPU_TAGS = ["at91"]
+CPU_TAGS = ["at91", CORE_CPU]
 
 # Where are locate the bertos directories
 SCRIPT_DIR = CPU_DIR + "arm/scripts/"
 HW_DIR = CPU_DIR + "arm/hw/"
-DRV_DIR = CPU_DIR + "arm/drv/"
+PROG_SCRIPT_DIR = "prog_scripts/arm/"
+
+MK_FLASH_SCRIPT = PROG_SCRIPT_DIR + "flash.sh"
+MK_DEBUG_SCRIPT = PROG_SCRIPT_DIR + "debug.sh"
+MK_GDB_INIT_SCRIPT = PROG_SCRIPT_DIR + "openocd/gdbinit-sam7"
 
 # Common GCC flags.
-CPPA_FLAGS = [ "-O0", "-g -gdwarf-2", "-g -gen-debug" ]
-CPP_FLAGS = [ "-O0", "-g3 -gdwarf-2", "-fverbose-asm", "-I" + CPU_DIR + "arm/" ]
-LD_FLAGS = [ "-nostartfiles", "-Wl,--no-warn-mismatch" ]
-# CRT file.
-CPPA_SRC = [ HW_DIR + "crtat91sam7_rom.S"]
+MK_CPPAFLAGS = "-O0 -g -gdwarf-2 -g -gen-debug"
+MK_CPU_CPPFLAGS = "-O0 -g3 -gdwarf-2 -fverbose-asm -I" + CPU_DIR + "arm/"
+MK_LDFLAGS = "-nostartfiles -Wl,--no-warn-mismatch"
 
-# For this cpu core BeRTOS supports these drivers:
-SUPPORTED_DRV = [ "adc",
-                 "kdebug",
-                 "pwm",
-                 "ser",
-                 "stepper",
-                 "timer",
-                 "twi" ]
+# CRT file.
+MK_CPPASRC = [ HW_DIR + "crtat91sam7_rom.S"]