Update 'make flash' support for ARM chips.

[bertos.git] / bertos / cpu / arm / scripts / openocd / cpu.tcl

diff --git a/bertos/cpu/arm/scripts/openocd/cpu.tcl b/bertos/cpu/arm/scripts/openocd/cpu.tcl
deleted file mode 100644 (file)
index 5d5dad6..0000000
--- a/bertos/cpu/arm/scripts/openocd/cpu.tcl
+++ /dev/null
@@ -1,61 +0,0 @@
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME sam7
-}
-
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x3f0f0f0f
-}
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
-
-$_TARGETNAME configure -event reset-start [
-       halt
-       sleep 10
-
-       arm7_9 dcc_downloads enable
-
-       armv4_5 core_state arm
-       arm7_9 fast_memory_access enable
-
-       # Init - taken from the script openocd_at91sam7_ecr.script
-       mww 0xfffffd44 0x00008000  # disable watchdog
-       mww 0xfffffd08 0xa5000001  # enable user reset
-       mww 0xfffffc20 0x00000601  # CKGR_MOR : enable the main oscillator
-       sleep 10
-       mww 0xfffffc2c 0x00481c0e   # CKGR_PLLR: 96.1097 MHz
-       sleep 10
-       mww 0xfffffc30 0x00000007  # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
-       sleep 10
-       mww 0xffffff60 0x003c0100  # MC_FMR: flash mode (FWS=1,FMCN=60)
-       # arm7_9 force_hw_bkpts enable  # program resides in flash
-       sleep 10
-
-       poll
-       flash probe 0
-       flash write_image IMAGE_FILE 0x0100000 bin
-]
-
-#"script at91sam7_write_to_flash.script"
-
-$_TARGETNAME configure -event reset-end "shutdown"
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank at91sam7 0 0 0 0 0