Remove old scripts.

[bertos.git] / bertos / cpu / arm / scripts / openocd / openocd_new_at91sam7_ftdi_ram.cfg

diff --git a/bertos/cpu/arm/scripts/openocd/openocd_new_at91sam7_ftdi_ram.cfg b/bertos/cpu/arm/scripts/openocd/openocd_new_at91sam7_ftdi_ram.cfg
deleted file mode 100644 (file)
index d5e6ae8..0000000
--- a/bertos/cpu/arm/scripts/openocd/openocd_new_at91sam7_ftdi_ram.cfg
+++ /dev/null
@@ -1,49 +0,0 @@
-
-# Change the default telnet port...
-telnet_port 4444
-
-# Port for TCL connection.
-tcl_port 6666
-
-# GDB connects here
-gdb_port 3333
-# GDB can also flash my flash!
-gdb_memory_map enable
-gdb_flash_program disable
-gdb_breakpoint_override soft
-
-interface ft2232
-#ft2232_device_desc "Amontec JTAGkey"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME sam7
-}
-
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x3f0f0f0f
-}
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank at91sam7 0 0 0 0 0