Move all Openocd-related files to separate folder; initial 'make flash' support for...

[bertos.git] / bertos / cpu / arm / scripts / openocd_at91sam7_ftdi_ram_win.cfg

diff --git a/bertos/cpu/arm/scripts/openocd_at91sam7_ftdi_ram_win.cfg b/bertos/cpu/arm/scripts/openocd_at91sam7_ftdi_ram_win.cfg
deleted file mode 100755 (executable)
index 2c52f8e..0000000
--- a/bertos/cpu/arm/scripts/openocd_at91sam7_ftdi_ram_win.cfg
+++ /dev/null
@@ -1,52 +0,0 @@
-#\r
-# Flash AT91SAM7S memory using openocd \r
-# and a FTDI FT2232-based JTAG-interface\r
-#\r
-# created by Martin Thomas \r
-# based on information from Dominic Rath\r
-#\r
-\r
-#daemon configuration\r
-telnet_port 4444\r
-gdb_port 3333\r
-\r
-#interface\r
-interface ft2232\r
-ft2232_device_desc "Amontec JTAGkey A"\r
-ft2232_layout jtagkey\r
-ft2232_vid_pid 0x0403 0xcff8\r
-jtag_speed 0\r
-jtag_nsrst_delay 200\r
-jtag_ntrst_delay 200\r
-\r
-#use combined on interfaces or targets that can't set TRST/SRST separately\r
-reset_config srst_only srst_pulls_trst\r
-\r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#target configuration\r
-daemon_startup reset\r
-\r
-#target <type> <startup mode>\r
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>\r
-target arm7tdmi little run_and_init 0 arm7tdmi\r
-run_and_halt_time 0 30\r
-\r
-# flash-options AT91\r
-target_script 0 reset openocd_at91sam7_reset.script\r
-working_area 0 0x00200000 0x10000 nobackup\r
-flash bank at91sam7 0 0 0 0 0\r
-\r
-# Information: \r
-# erase command (telnet-interface) for complete flash:\r
-# flash erase <num> 0 numlockbits-1 (can be seen from output of flash info 0)\r
-# SAM7S64 with 16 lockbits and bank 0: flash erase 0 0 15\r
-# set/clear NVM-Bits:\r
-# at91sam7 gpnvm <num> <bit> <set|clear>\r
-# disable locking from SAM-BA\r
-# flash protect 0 0 1 off\r
-\r
-# For more information about the configuration files, take a look at:\r
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger\r