Convert to unix format. Removing trailing space.

[bertos.git] / bertos / cpu / arm / scripts / openocd_new_at91sam7_ftdi_ram.cfg

diff --git a/bertos/cpu/arm/scripts/openocd_new_at91sam7_ftdi_ram.cfg b/bertos/cpu/arm/scripts/openocd_new_at91sam7_ftdi_ram.cfg
index ff1d23ea3f23f2ec864b237d7c213879bf6483fe..d5e6ae8a70467b0f3e15d9cea4ae750a90cea00d 100644 (file)
--- a/bertos/cpu/arm/scripts/openocd_new_at91sam7_ftdi_ram.cfg
+++ b/bertos/cpu/arm/scripts/openocd_new_at91sam7_ftdi_ram.cfg
@@ -1,49 +1,49 @@
-\r
-# Change the default telnet port...\r
-telnet_port 4444\r
-\r
-# Port for TCL connection.\r
-tcl_port 6666\r
-\r
-# GDB connects here\r
-gdb_port 3333\r
-# GDB can also flash my flash!\r
-gdb_memory_map enable\r
-gdb_flash_program disable\r
-gdb_breakpoint_override soft\r
-\r
-interface ft2232\r
-#ft2232_device_desc "Amontec JTAGkey"\r
-ft2232_layout jtagkey\r
-ft2232_vid_pid 0x0403 0xcff8\r
-\r
-#use combined on interfaces or targets that can't set TRST/SRST separately\r
-reset_config srst_only srst_pulls_trst\r
-\r
-if { [info exists CHIPNAME] } {        \r
-   set  _CHIPNAME $CHIPNAME    \r
-} else {        \r
-   set  _CHIPNAME sam7\r
-}\r
-\r
-if { [info exists ENDIAN] } {  \r
-   set  _ENDIAN $ENDIAN    \r
-} else {        \r
-   set  _ENDIAN little\r
-}\r
-\r
-if { [info exists CPUTAPID ] } {\r
-   set _CPUTAPID $CPUTAPID\r
-} else {\r
-   set _CPUTAPID 0x3f0f0f0f\r
-}\r
-\r
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID\r
-\r
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]\r
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi\r
-\r
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0\r
-\r
-#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
-flash bank at91sam7 0 0 0 0 0\r
+
+# Change the default telnet port...
+telnet_port 4444
+
+# Port for TCL connection.
+tcl_port 6666
+
+# GDB connects here
+gdb_port 3333
+# GDB can also flash my flash!
+gdb_memory_map enable
+gdb_flash_program disable
+gdb_breakpoint_override soft
+
+interface ft2232
+#ft2232_device_desc "Amontec JTAGkey"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME sam7
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x3f0f0f0f
+}
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank at91sam7 0 0 0 0 0