Add support for missing avr cpu.

[bertos.git] / bertos / cpu / avr / drv / adc_avr.c

diff --git a/bertos/cpu/avr/drv/adc_avr.c b/bertos/cpu/avr/drv/adc_avr.c
index 33beeca39acad872e9c60739af403f8f3a968472..7e932f62ecd1e2d1751058c7450f735d1f68978c 100644 (file)
--- a/bertos/cpu/avr/drv/adc_avr.c
+++ b/bertos/cpu/avr/drv/adc_avr.c
@@ -31,18 +31,20 @@
  *
  * \brief ADC hardware-specific definition
  *
- * \version $Id$
  * \author Francesco Sacchi <batt@develer.com>
  *
  * This module is automatically included so no need to include
  * in test list.
  * notest: avr
+ *
+ * $WIZ$
  */
 
 #include "adc_avr.h"
 
 #include "cfg/cfg_adc.h"
-#include "cfg/cfg_kern.h"
+#include "cfg/cfg_proc.h"
+#include "cfg/cfg_signal.h"
 #include <cfg/macros.h>
 #include <cfg/compiler.h>
 
@@ -53,9 +55,16 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
 
+/**
+ * ADC voltage referencese.
+ *
+ * $WIZ$ avr_adc_refs = "ADC_AVR_AREF", "ADC_AVR_AVCC", "ADC_AVR_INT256"
+ * \{
+ */
 #define ADC_AVR_AREF   0
 #define ADC_AVR_AVCC   1
 #define ADC_AVR_INT256 2
+/* \} */
 
 #if CONFIG_KERN
        #include <cfg/module.h>
@@ -64,7 +73,7 @@
 
 
        #if !CONFIG_KERN_SIGNALS
-               #error Signals must be active to use ADC with kernel
+               #error Signals must be active to use the ADC with kernel
        #endif
 
        /* Signal adc convertion end */
@@ -79,7 +88,7 @@
         */
        ISR(ADC_vect)
        {
-               sig_signal(adc_process, SIG_ADC_COMPLETE);
+               sig_post(adc_process, SIG_ADC_COMPLETE);
        }
 #endif /* CONFIG_KERN */
 
@@ -87,10 +96,16 @@
  * Select mux channel \a ch.
  * \todo only first 8 channels are selectable!
  */
-INLINE void adc_hw_select_ch(uint8_t ch)
+void adc_hw_select_ch(uint8_t ch)
 {
        /* Set to 0 all mux registers */
-       ADMUX &= ~(BV(MUX4) | BV(MUX3) | BV(MUX2) | BV(MUX1) | BV(MUX0));
+       #if CPU_AVR_ATMEGA8 || CPU_AVR_ATMEGA328P || CPU_AVR_ATMEGA168
+               ADMUX &= ~(BV(MUX3) | BV(MUX2) | BV(MUX1) | BV(MUX0));
+       #elif CPU_AVR_ATMEGA32 || CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA1281
+               ADMUX &= ~(BV(MUX4) | BV(MUX3) | BV(MUX2) | BV(MUX1) | BV(MUX0));
+       #else
+               #error Unknown CPU
+       #endif
 
        /* Select channel, only first 8 channel modes are supported for now */
        ADMUX |= (ch & 0x07);
@@ -102,7 +117,7 @@ INLINE void adc_hw_select_ch(uint8_t ch)
  * If a kernel is present, preempt until convertion is complete, otherwise
  * a busy wait on ADCS bit is done.
  */
-INLINE uint16_t adc_hw_read(void)
+uint16_t adc_hw_read(void)
 {
        // Ensure another convertion is not running.
        ASSERT(!(ADCSRA & BV(ADSC)));
@@ -126,7 +141,7 @@ INLINE uint16_t adc_hw_read(void)
 /**
  * Init ADC hardware.
  */
-INLINE void adc_hw_init(void)
+void adc_hw_init(void)
 {
        /*
         * Select channel 0 as default,