Update isr name.

[bertos.git] / bertos / cpu / avr / drv / ser_avr.c

diff --git a/bertos/cpu/avr/drv/ser_avr.c b/bertos/cpu/avr/drv/ser_avr.c
index 955ab8ebc0c52bc7fee8057ddad5de9e2fb341c8..066444822abd40d669fc62ebf41de772ea207af3 100644 (file)
--- a/bertos/cpu/avr/drv/ser_avr.c
+++ b/bertos/cpu/avr/drv/ser_avr.c
@@ -533,7 +533,7 @@ static void spi_starttx(struct SerialHardware *_hw)
 {
        struct AvrSerial *hw = (struct AvrSerial *)_hw;
 
-       cpuflags_t flags;
+       cpu_flags_t flags;
        IRQ_SAVE_DISABLE(flags);
 
        /* Send data only if the SPI is not already transmitting */
@@ -664,7 +664,7 @@ struct SerialHardware *ser_hw_getdesc(int unit)
 SIGNAL(SIG_CTS)
 {
        // Re-enable UDR empty interrupt and TX, then disable CTS interrupt
-       UCSR0B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN);
+       UCSR0B = BV(BIT_RXCIE0) | BV(BIT_UDRIE0) | BV(BIT_RXEN0) | BV(BIT_TXEN0);
        EIMSK &= ~EIMSKF_CTS;
 }
 
@@ -692,7 +692,7 @@ SIGNAL(USART0_UDRE_vect)
        {
                // Disable rx interrupt and tx, enable CTS interrupt
                // UNTESTED
-               UCSR0B = BV(RXCIE) | BV(RXEN) | BV(TXEN);
+               UCSR0B = BV(BIT_RXCIE0) | BV(BIT_RXEN0) | BV(BIT_TXEN0);
                EIFR |= EIMSKF_CTS;
                EIMSK |= EIMSKF_CTS;
        }
@@ -733,7 +733,7 @@ SIGNAL(SIG_UART0_TRANS)
                UARTDescs[SER_UART0].sending = false;
        }
        else
-               UCSR0B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN);
+               UCSR0B = BV(BIT_RXCIE0) | BV(BIT_UDRIE0) | BV(BIT_RXEN0) | BV(BIT_TXEN0);
 
        SER_STROBE_OFF;
 }
@@ -763,7 +763,7 @@ SIGNAL(USART1_UDRE_vect)
        {
                // Disable rx interrupt and tx, enable CTS interrupt
                // UNTESTED
-               UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN);
+               UCSR1B = BV(BIT_RXCIE1) | BV(BIT_RXEN1) | BV(BIT_TXEN1);
                EIFR |= EIMSKF_CTS;
                EIMSK |= EIMSKF_CTS;
        }
@@ -783,7 +783,7 @@ SIGNAL(USART1_UDRE_vect)
  *
  * \sa port 0 TX complete handler.
  */
-SIGNAL(SIG_UART1_TRANS)
+SIGNAL(USART1_TX_vect)
 {
        SER_STROBE_ON;
 
@@ -794,7 +794,7 @@ SIGNAL(SIG_UART1_TRANS)
                UARTDescs[SER_UART1].sending = false;
        }
        else
-               UCSR1B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN);
+               UCSR1B = BV(BIT_RXCIE1) | BV(BIT_UDRIE1) | BV(BIT_RXEN1) | BV(BIT_TXEN1);
 
        SER_STROBE_OFF;
 }