Rename CLOCK_FREQ macro to CPU_FREQ: now clock frequency has to be set in the makefile.

[bertos.git] / bertos / cpu / avr / drv / ser_avr.c

diff --git a/bertos/cpu/avr/drv/ser_avr.c b/bertos/cpu/avr/drv/ser_avr.c
index 9da5d5a2d5eff51e00cbd26e65d44e712045d33f..d3cc743d0d6ca0e32d7d492832bccfd301a509b5 100644 (file)
--- a/bertos/cpu/avr/drv/ser_avr.c
+++ b/bertos/cpu/avr/drv/ser_avr.c
@@ -40,7 +40,7 @@
  */
 
 #include "hw/hw_ser.h"  /* Required for bus macros overrides */
-#include "hw/hw_cpu.h"  /* CLOCK_FREQ */
+#include <hw/hw_cpufreq.h>  /* CPU_FREQ */
 
 #include "cfg/cfg_ser.h"
 
@@ -377,7 +377,7 @@ static void uart0_enabletxirq(struct SerialHardware *_hw)
 static void uart0_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate)
 {
        /* Compute baud-rate period */
-       uint16_t period = DIV_ROUND(CLOCK_FREQ / 16UL, rate) - 1;
+       uint16_t period = DIV_ROUND(CPU_FREQ / 16UL, rate) - 1;
 
 #if !CPU_AVR_ATMEGA103
        UBRR0H = (period) >> 8;
@@ -430,7 +430,7 @@ static void uart1_enabletxirq(struct SerialHardware *_hw)
 static void uart1_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate)
 {
        /* Compute baud-rate period */
-       uint16_t period = DIV_ROUND(CLOCK_FREQ / 16UL, rate) - 1;
+       uint16_t period = DIV_ROUND(CPU_FREQ / 16UL, rate) - 1;
 
        UBRR1H = (period) >> 8;
        UBRR1L = (period);
@@ -783,7 +783,7 @@ SIGNAL(USART1_UDRE_vect)
  *
  * \sa port 0 TX complete handler.
  */
-SIGNAL(SIG_UART1_TRANS)
+SIGNAL(USART1_TX_vect)
 {
        SER_STROBE_ON;