Move AVR mega serial files to prepare the XMega patch

[bertos.git] / bertos / cpu / avr / drv / ser_avr.h

diff --git a/bertos/cpu/avr/drv/ser_avr.h b/bertos/cpu/avr/drv/ser_avr.h
deleted file mode 100644 (file)
index 68d5e50..0000000
--- a/bertos/cpu/avr/drv/ser_avr.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2007, 2010 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- *
- * \author Daniele Basile <asterix@develer.com>
- * \author Luca Ottaviano <lottaviano@develer.com>
- *
- * \brief Low-level serial module for AVR (interface).
- *
- */
-
-#ifndef DRV_SER_AVR_H
-#define DRV_SER_AVR_H
-
-#include <cfg/macros.h> /* BV() */
-#include <cfg/compiler.h>  /* uint32_t */
-
-typedef uint8_t serstatus_t;
-
-/* Software errors */
-#define SERRF_RXFIFOOVERRUN  BV(0)  /**< Rx FIFO buffer overrun */
-#define SERRF_RXTIMEOUT      BV(5)  /**< Receive timeout */
-#define SERRF_TXTIMEOUT      BV(6)  /**< Transmit timeout */
-
-/*
-* Hardware errors.
-* These flags map directly to the AVR UART Status Register (USR).
-*/
-#define SERRF_RXSROVERRUN    BV(3)  /**< Rx shift register overrun */
-#define SERRF_FRAMEERROR     BV(4)  /**< Stop bit missing */
-#define SERRF_PARITYERROR    BV(7)  /**< Parity error */
-#define SERRF_NOISEERROR     0      /**< Unsupported */
-
-
-/**
- * SPI clock polarity.
- *
- * $WIZ$ ser_spi_pol = "SPI_NORMAL_LOW", "SPI_NORMAL_HIGH"
- * }
- */
-#define SPI_NORMAL_LOW      0
-#define SPI_NORMAL_HIGH     1
-
-/**
- * SPI clock phase.
- *
- * $WIZ$ ser_spi_phase = "SPI_SAMPLE_ON_FIRST_EDGE", "SPI_SAMPLE_ON_SECOND_EDGE"
- * }
- */
-#define SPI_SAMPLE_ON_FIRST_EDGE    0
-#define SPI_SAMPLE_ON_SECOND_EDGE   1
-
-/**
- * \name Serial hw numbers
- *
- * \{
- */
-enum
-{
-#if  CPU_AVR_ATMEGA1280 || CPU_AVR_ATMEGA2560
-       SER_UART0,
-       SER_UART1,
-       SER_UART2,
-       SER_UART3,
-       SER_SPI,
-#elif  CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA1281
-       SER_UART0,
-       SER_UART1,
-       SER_SPI,
-#elif CPU_AVR_ATMEGA103 || CPU_AVR_ATMEGA8 || CPU_AVR_ATMEGA32 || CPU_AVR_ATMEGA168 \
-               || CPU_AVR_ATMEGA328P
-       SER_UART0,
-       SER_SPI,
-#else
-       #error unknown architecture
-#endif
-       SER_CNT  /**< Number of serial ports */
-};
-/*\}*/
-
-#endif /* DRV_SER_AVR_H */