STM32-P103: add real-time clock (RTC) driver

[bertos.git] / bertos / cpu / cortex-m3 / drv / kdebug_sam3.c

diff --git a/bertos/cpu/cortex-m3/drv/kdebug_sam3.c b/bertos/cpu/cortex-m3/drv/kdebug_sam3.c
index 80e5501f2f9e1aeb4748d55ba985c473c2990317..3438c05c3877318e0a71f2ba06d4323b6215af1c 100644 (file)
--- a/bertos/cpu/cortex-m3/drv/kdebug_sam3.c
+++ b/bertos/cpu/cortex-m3/drv/kdebug_sam3.c
@@ -30,7 +30,7 @@
  *
  * -->
  *
- * \brief AT91SAM3 debug support (implementation).
+ * \brief SAM3 debug support (implementation).
  *
  * \author Stefano Fedrigo <aleph@develer.com>
  */
@@ -43,12 +43,12 @@
 
 #if CONFIG_KDEBUG_PORT == 0
        #define UART_BASE       UART0_BASE
-       #define UART_INT        INT_UART0
+       #define UART_ID         UART0_ID
        #define UART_PIO_BASE   PIOA_BASE
        #define UART_PINS       (BV(RXD0) | BV(TXD0))
-#elif (CONFIG_KDEBUG_PORT == 1) && !defined(CPU_CM3_AT91SAM3U)
+#elif (CONFIG_KDEBUG_PORT == 1) && !defined(CPU_CM3_SAM3U)
        #define UART_BASE       UART1_BASE
-       #define UART_INT        INT_UART1
+       #define UART_ID         UART1_ID
        #define UART_PIO_BASE   PIOB_BASE
        #define UART_PINS       (BV(RXD1) | BV(TXD1))
 #else
@@ -78,7 +78,7 @@ INLINE void kdbg_hw_init(void)
        HWREG(UART_PIO_BASE + PIO_ABCDSR2_OFF) &= ~UART_PINS;
 
        /* Enable the peripheral clock */
-       PMC_PCER |= BV(UART_INT);
+       PMC_PCER = BV(UART_ID);
 
        /* Reset and disable receiver & transmitter */
        HWREG(UART_BASE + UART_CR_OFF) = BV(UART_CR_RSTRX) | BV(UART_CR_RSTTX) | BV(UART_CR_RXDIS) | BV(UART_CR_TXDIS);