Remove duplicate define. Put all phy chip specific defines in its

[bertos.git] / bertos / cpu / cortex-m3 / io / sam3.h

diff --git a/bertos/cpu/cortex-m3/io/sam3.h b/bertos/cpu/cortex-m3/io/sam3.h
index 688eda9b55a5a030ce6ca3b18eedbb8b35688943..bedb1ce68fae36385f6496dbf6a54dce735d60a6 100644 (file)
--- a/bertos/cpu/cortex-m3/io/sam3.h
+++ b/bertos/cpu/cortex-m3/io/sam3.h
@@ -363,5 +363,36 @@
 #endif
 
 
-/*\}*/
+#if CPU_CM3_SAM3X8
+       // Port B
+       #define PHY_REFCLK_XT2_BIT      0
+       #define PHY_TXEN_BIT            1
+       #define PHY_TXD0_BIT            2
+       #define PHY_TXD1_BIT            3
+       #define PHY_RXDV_TESTMODE_BIT   4
+       #define PHY_RXD0_AD0_BIT        5
+       #define PHY_RXD1_AD1_BIT        6
+       #define PHY_RXER_RXD4_RPTR_BIT  7
+       #define PHY_MDC_BIT             8
+       #define PHY_MDIO_BIT            9
+       // Port A
+       #define PHY_MDINTR_BIT          5
+#elif (CPU_CM3_SAM3U || CPU_CM3_SAM3N)
+       /* No ethernet interface is present on this cpu */
+#else
+       #error No MII/RMII PHY pins interface was define for select CPU.
+#endif
+
+#define PHY_MII_PINS_PORTB \
+       BV(PHY_REFCLK_XT2_BIT) \
+       | BV(PHY_TXEN_BIT) \
+       | BV(PHY_TXD0_BIT) \
+       | BV(PHY_TXD1_BIT) \
+       | BV(PHY_RXD0_AD0_BIT) \
+       | BV(PHY_RXD1_AD1_BIT) \
+       | BV(PHY_RXER_RXD4_RPTR_BIT) \
+       | BV(PHY_MDC_BIT) \
+       | BV(PHY_MDIO_BIT)
+
+
 #endif /* SAM3_H */