Add sam3x dac private funcion to use hight level api.

[bertos.git] / bertos / cpu / cortex-m3 / io / sam3_flash.h

diff --git a/bertos/cpu/cortex-m3/io/sam3_flash.h b/bertos/cpu/cortex-m3/io/sam3_flash.h
index 611e61da5b7ad592a5a0ca3960ef8d27f1b573be..44cae6a53464eb0838be2cce086e78a1c842fade 100644 (file)
--- a/bertos/cpu/cortex-m3/io/sam3_flash.h
+++ b/bertos/cpu/cortex-m3/io/sam3_flash.h
@@ -30,16 +30,22 @@
  *
  * -->
  *
- * \brief ATSAM3 enhanced embedded flash controller definitions.
+ * \brief Atmel SAM3 enhanced embedded flash controller definitions.
  */
 
 #ifndef SAM3_FLASH_H
 #define SAM3_FLASH_H
 
 /**
- * EEFC base register address.
+ * EEFC base registers addresses.
  */
-#define EEFC_BASE  0x400E0A00
+/*\{*/
+#define EEFC0_BASE  0x400E0A00
+#ifdef CPU_CM3_SAM3X
+       #define EEFC1_BASE  0x400E0C00
+#endif
+/*\}*/
+
 
 /**
  * EFC register offsets.
@@ -55,10 +61,17 @@
  * EEFC registers.
  */
 /*\{*/
-#define EEFC_FMR  (*((reg32_t *)(EEFC_BASE + EEFC_FMR_OFF)))  ///< Flash Mode Register
-#define EEFC_FCR  (*((reg32_t *)(EEFC_BASE + EEFC_FCR_OFF)))  ///< Flash Command Register
-#define EEFC_FSR  (*((reg32_t *)(EEFC_BASE + EEFC_FSR_OFF)))  ///< Flash Status Register
-#define EEFC_FRR  (*((reg32_t *)(EEFC_BASE + EEFC_FRR_OFF)))  ///< Flash Result Register
+#define EEFC0_FMR  (*((reg32_t *)(EEFC0_BASE + EEFC_FMR_OFF)))  ///< Flash Mode Register
+#define EEFC0_FCR  (*((reg32_t *)(EEFC0_BASE + EEFC_FCR_OFF)))  ///< Flash Command Register
+#define EEFC0_FSR  (*((reg32_t *)(EEFC0_BASE + EEFC_FSR_OFF)))  ///< Flash Status Register
+#define EEFC0_FRR  (*((reg32_t *)(EEFC0_BASE + EEFC_FRR_OFF)))  ///< Flash Result Register
+
+#ifdef CPU_CM3_SAM3X
+       #define EEFC1_FMR  (*((reg32_t *)(EEFC1_BASE + EEFC_FMR_OFF)))  ///< Flash Mode Register
+       #define EEFC1_FCR  (*((reg32_t *)(EEFC1_BASE + EEFC_FCR_OFF)))  ///< Flash Command Register
+       #define EEFC1_FSR  (*((reg32_t *)(EEFC1_BASE + EEFC_FSR_OFF)))  ///< Flash Status Register
+       #define EEFC1_FRR  (*((reg32_t *)(EEFC1_BASE + EEFC_FRR_OFF)))  ///< Flash Result Register
+#endif
 /*\}*/
 
 
@@ -67,34 +80,34 @@
  * Defines for bit fields in EEFC_FMR register.
  */
 /*\{*/
-#define EEFC_FMR_FRDY        BV(0)                   ///< Ready Interrupt Enable
-#define EEFC_FMR_FWS_S       8
-#define EEFC_FMR_FWS_M       (0xf << EEFC_FMR_FWS_S) ///< Flash Wait State
-#define EEFC_FMR_FWS(value)  (EEFC_FMR_FWS_M & ((value) << EEFC_FMR_FWS_S))
-#define EEFC_FMR_FAM BV(24)                          ///< Flash Access Mode
+#define EEFC_FMR_FRDY        0                       ///< Ready Interrupt Enable
+#define EEFC_FMR_FWS_SHIFT   8
+#define EEFC_FMR_FWS_MASK    (0xf << EEFC_FMR_FWS_SHIFT) ///< Flash Wait State
+#define EEFC_FMR_FWS(value)  (EEFC_FMR_FWS_MASK & ((value) << EEFC_FMR_FWS_SHIFT))
+#define EEFC_FMR_FAM         24                      ///< Flash Access Mode
 /*\}*/
 
 /**
  * Defines for bit fields in EEFC_FCR register.
  */
 /*\{*/
-#define EEFC_FCR_FCMD_M       0xff                        ///< Flash Command
-#define EEFC_FCR_FCMD(value)  (EEFC_FCR_FCMD_M & (value))
-#define EEFC_FCR_FARG_S       8
-#define EEFC_FCR_FARG_M       (0xffff << EEFC_FCR_FARG_S) ///< Flash Command Argument
-#define EEFC_FCR_FARG(value)  (EEFC_FCR_FARG_M & ((value) << EEFC_FCR_FARG_S))
-#define EEFC_FCR_FKEY_S       24
-#define EEFC_FCR_FKEY_M       (0xff << EEFC_FCR_FKEY_S)   ///< Flash Writing Protection Key
-#define EEFC_FCR_FKEY(value)  (EEFC_FCR_FKEY_M & ((value) << EEFC_FCR_FKEY_S))
+#define EEFC_FCR_FCMD_MASK    0xff                        ///< Flash Command
+#define EEFC_FCR_FCMD(value)  (EEFC_FCR_FCMD_MASK & (value))
+#define EEFC_FCR_FARG_SHIFT   8
+#define EEFC_FCR_FARG_MASK    (0xffff << EEFC_FCR_FARG_SHIFT) ///< Flash Command Argument
+#define EEFC_FCR_FARG(value)  (EEFC_FCR_FARG_MASK & ((value) << EEFC_FCR_FARG_SHIFT))
+#define EEFC_FCR_FKEY_SHIFT   24
+#define EEFC_FCR_FKEY_MASK    (0xff << EEFC_FCR_FKEY_SHIFT)   ///< Flash Writing Protection Key
+#define EEFC_FCR_FKEY(value)  (EEFC_FCR_FKEY_MASK & ((value) << EEFC_FCR_FKEY_SHIFT))
 /*\}*/
 
 /**
  * Defines for bit fields in EEFC_FSR register.
  */
 /*\{*/
-#define EEFC_FSR_FRDY    BV(0)  ///< Flash Ready Status
-#define EEFC_FSR_FCMDE   BV(1)  ///< Flash Command Error Status
-#define EEFC_FSR_FLOCKE  BV(2)  ///< Flash Lock Error Status
+#define EEFC_FSR_FRDY       0  ///< Flash Ready Status
+#define EEFC_FSR_FCMDE      1  ///< Flash Command Error Status
+#define EEFC_FSR_FLOCKE     2  ///< Flash Lock Error Status
 /*\}*/
 
 #endif /* SAM3_FLASH_H */