kdb: re-enable calling poor man's scheduler inside kbd_peek().

[bertos.git] / bertos / cpu / frame.h

diff --git a/bertos/cpu/frame.h b/bertos/cpu/frame.h
index 2244b3b1bf85a243ca1d1f407a365fd1bc99cf24..0809b0eca4d86994baaa48706506f3b8ba4aa0fa 100644 (file)
--- a/bertos/cpu/frame.h
+++ b/bertos/cpu/frame.h
@@ -51,51 +51,22 @@
 #include <cfg/compiler.h>      /* for uintXX_t */
 
 #if CPU_X86
-
-       #define CPU_SAVED_REGS_CNT      7
+       #if CPU_X86_32
+               #define CPU_SAVED_REGS_CNT      2
+       #elif CPU_X86_64
+               #define CPU_SAVED_REGS_CNT      8
+       #else
+               #error "unknown CPU"
+       #endif
        #define CPU_STACK_GROWS_UPWARD  0
        #define CPU_SP_ON_EMPTY_SLOT    0
 
 #elif CPU_ARM
 
-       #define CPU_SAVED_REGS_CNT     10
+       #define CPU_SAVED_REGS_CNT     8
        #define CPU_STACK_GROWS_UPWARD 0
        #define CPU_SP_ON_EMPTY_SLOT   0
 
-       /**
-        * Initialization value for registers in stack frame.
-        * For the CPSR register, the initial value is set to:
-        * - All flags (N, Z, C, V) set to 0.
-        * - IRQ and FIQ enabled.
-        * - ARM state.
-        * - CPU in Supervisor Mode (SVC).
-        */
-       #define CPU_CREATE_NEW_STACK(stack, entry, exit) \
-       do { \
-               /* Process entry point */ \
-               CPU_PUSH_CALL_FRAME(stack, entry); \
-               /* LR (proc_exit) */ \
-               CPU_PUSH_CALL_FRAME(stack, exit); \
-               /* R11 */ \
-               CPU_PUSH_WORD(stack, 0x11111111); \
-               /* R10 */ \
-               CPU_PUSH_WORD(stack, 0x10101010); \
-               /* R9 */ \
-               CPU_PUSH_WORD(stack, 0x09090909); \
-               /* R8 */ \
-               CPU_PUSH_WORD(stack, 0x08080808); \
-               /* R7 */ \
-               CPU_PUSH_WORD(stack, 0x07070707); \
-               /* R6 */ \
-               CPU_PUSH_WORD(stack, 0x06060606); \
-               /* R5 */ \
-               CPU_PUSH_WORD(stack, 0x05050505); \
-               /* R4 */ \
-               CPU_PUSH_WORD(stack, 0x04040404); \
-               /* CPSR */ \
-               CPU_PUSH_WORD(stack, 0x00000013); \
-       } while (0)
-
 #elif CPU_PPC
 
        #define CPU_SAVED_REGS_CNT     1
@@ -110,18 +81,10 @@
 
 #elif CPU_AVR
 
-       #define CPU_SAVED_REGS_CNT     19
+       #define CPU_SAVED_REGS_CNT     18
        #define CPU_STACK_GROWS_UPWARD  0
        #define CPU_SP_ON_EMPTY_SLOT    1
 
-       /**
-        * Initialization value for registers in stack frame.
-        * The register index is not directly corrispondent to CPU
-        * register numbers. Index 0 is the SREG register: the initial
-        * value is all 0 but the interrupt bit (bit 7).
-        */
-       #define CPU_REG_INIT_VALUE(reg) (reg == 0 ? 0x80 : 0)
-
 #else
        #error No CPU_... defined.
 #endif
@@ -136,7 +99,7 @@
 
 /// Default for macro not defined in the right arch section
 #ifndef CPU_REG_INIT_VALUE
-       #define CPU_REG_INIT_VALUE(reg)     0
+       #define CPU_REG_INIT_VALUE(reg)     (reg)
 #endif
 
 /*
@@ -249,9 +212,9 @@
        #if defined(ARCH_QT) && (ARCH & ARCH_QT)
                /* This emulator hook should yield the CPU to the host.  */
                EXTERN_C_BEGIN
-               void emul_idle(void);
+               void schedule(void);
                EXTERN_C_END
-               #define CPU_IDLE emul_idle()
+               #define CPU_IDLE schedule()
        #else /* !ARCH_EMUL */
                #define CPU_IDLE do { /* nothing */ } while (0)
        #endif /* !ARCH_EMUL */
@@ -259,15 +222,14 @@
 
 /**
  * Default macro for creating a new Process stack
- */ 
+ */
 #ifndef CPU_CREATE_NEW_STACK
 
-       #define CPU_CREATE_NEW_STACK(stack, entry, exit) \
+       #define CPU_CREATE_NEW_STACK(stack) \
                do { \
                        size_t i; \
                        /* Initialize process stack frame */ \
-                       CPU_PUSH_CALL_FRAME(stack, exit); \
-                       CPU_PUSH_CALL_FRAME(stack, entry); \
+                       CPU_PUSH_CALL_FRAME(stack, proc_entry); \
                        /* Push a clean set of CPU registers for asm_switch_context() */ \
                        for (i = 0; i < CPU_SAVED_REGS_CNT; i++) \
                                CPU_PUSH_WORD(stack, CPU_REG_INIT_VALUE(i)); \