log: Retouch documentation; Rearrenge level logic; Rename LOG_VERBOSITY to LOG_FORMAT...

[bertos.git] / bertos / drv / dataflash_test.c

diff --git a/bertos/drv/dataflash_test.c b/bertos/drv/dataflash_test.c
index e81477583d5d0fae1466da07c733982e77db2967..276f9f432079e2f5ce29b861bf6c05d759c05ae4 100644 (file)
--- a/bertos/drv/dataflash_test.c
+++ b/bertos/drv/dataflash_test.c
@@ -37,7 +37,7 @@
  * To test memory we fill one buffer with casual char, and write it in different
  * part of memory. After every write we read the data that we have been write
  * and compare this with test buffer, checking if write and read command work
- * correclty. We also check if driver work properly when we make a write out the 
+ * correclty. We also check if driver work properly when we make a write out the
  * limit of memory size.
  *
  * Note: dataflash driver use a kfile interface, so for write/read test
@@ -45,25 +45,27 @@
  *
  *
  * \version $Id$
- *
  * \author Daniele Basile <asterix@develer.com>
  */
 
 #include "hw/hw_dataflash.h"
 #include "cfg/cfg_dataflash.h"
+#include "cfg/cfg_kern.h"
+
+#include <cfg/test.h>
 #include <cfg/debug.h>
 #include <cfg/module.h>
 
 // Define logging setting (for cfg/log.h module).
-#define LOG_LEVEL         DATAFLASH_LOG_LEVEL
-#define LOG_VERBOSITY     DATAFLASH_LOG_VERBOSITY
+#define LOG_LEVEL      DATAFLASH_LOG_LEVEL
+#define LOG_FORMAT     DATAFLASH_LOG_FORMAT
 #include <cfg/log.h>   // for logging system
 
 #include <drv/timer.h>
 #include <drv/ser.h>
 #include <drv/dataflash.h>
 
-
+#include <kern/proc.h>
 #include <kern/kfile.h>
 
 #include <string.h>
@@ -86,14 +88,14 @@
 #define DATAFLASH_TEST_STR_LEN                  12307
 
 // If you want use a rand function of standard library set to 1.
-#define DATAFLASH_USE_RAND_FUNC                     1
+#define DATAFLASH_USE_RAND_FUNC                     0
 /* \} */
 
 /*
  * Kfile structure to test a dataflash.
  */
-static KFileSerial spi_fd;
-static KFileDataflash dflash_fd;
+static Serial spi_fd;
+static DataFlash dflash_fd;
 
 /*
  * Define tmp buffer to stora data for
@@ -106,8 +108,15 @@ static uint8_t save_buf[DATAFLASH_TEST_STR_LEN];
  * Setup all needed to test dataflash memory
  *
  */
-int dataflash_testSetup(void)
+int dataflash_testSetUp(void)
 {
+        kfile_testSetUp();
+        LOG_INFO("KFILE setup..ok\n");
+
+        LOG_INFO("Check if kernel is enable (if enable you should see the assert message.)\n");
+        SILENT_ASSERT("bertos/drv/dataflash_test.c:119: Assertion failed: !CONFIG_KERNEL");
+        ASSERT(!CONFIG_KERNEL);
+
         /*
          * This test use a kfile_test module,
          * so should include source in your makefile.
@@ -121,10 +130,10 @@ int dataflash_testSetup(void)
          * Init SPI module and dataflash driver.
          */
         // Open SPI comunication channel
-        spimaster_init(&spi_fd, SER_SPI0);
+        spimaster_init(&spi_fd, CONFIG_SPI_PORT);
         LOG_INFO("SPI0 init..ok\n");
 
-        ser_setbaudrate(&spi_fd, 5000000UL);
+        ser_setbaudrate(&spi_fd, CONFIG_SPI_BAUDRATE);
         LOG_INFO("SPI0 set baudrate..ok\n");
 
         //Init dataflash memory
@@ -161,19 +170,10 @@ int dataflash_testSetup(void)
  */
 int dataflash_testRun(void)
 {
-        if (!dataflash_testSetup())
-        {
-                LOG_INFO("DATAFLASH setup..ok\n");
-        }
-        else
-        {
-                LOG_ERR("DATAFLASH setup..fail!\n");
-                return EOF;
-        }
-
         LOG_INFO("Run KFILE test.\n");
 
-        if (kfile_testRun(&dflash_fd.fd, test_buf, save_buf, sizeof(test_buf)))
+        SILENT_ASSERT("bertos/drv/dataflash.c:405: Assertion failed: fd->fd.seek_pos + size <= fd->fd.size");
+        if (kfile_testRun(&dflash_fd.fd, test_buf, save_buf, sizeof(test_buf)) != EOF)
         {
                 LOG_INFO("KFILE test..ok\n");
         }
@@ -208,7 +208,21 @@ int main(void)
         IRQ_ENABLE;
        kdbg_init();
 
-       dataflash_testRun();
+       #if CONFIG_KERNEL
+                proc_init();
+        #endif
+
+        if (!dataflash_testSetUp())
+        {
+                LOG_INFO("DATAFLASH setup..ok\n");
+        }
+        else
+        {
+                LOG_ERR("DATAFLASH setup..fail!\n");
+                return EOF;
+        }
+
+               dataflash_testRun();
 
         for(;;)
         {