* Copyright 2011 Develer S.r.l. (http://www.develer.com/)
* -->
*
-* \brief NAND driver
+* \brief ONFI 1.0 compliant NAND kblock driver
*
-* This module allows read/write access to ONFI 1.0 compliant NANDs.
+* Defective blocks are remapped in a reserved area of configurable size
+* at the bottom of the NAND.
+* At the moment there is no wear-leveling block translation: kblock's blocks
+* are mapped directly on NAND erase blocks: when a (k)block is written the
+* corresponding erase block is erased and all pages within are rewritten.
+* Partial write is not possible: it's recommended to use buffered mode.
+*
+* The driver needs to format the NAND before use. If the initialization code
+* detects a fresh memory it does a bad block scan and a formatting.
+* Format info isn't stored in NAND in a global structure: each block has its
+* info written in the spare area of its first page. These info contais a tag
+* to detect formatted blocks and an index for bad block remapping (struct
+* RemapInfo).
+*
+* The ECC for each page is written in the spare area too.
+*
+* Works only in 8 bit data mode and NAND parameters are not
+* detected at run-time, but hand-configured in cfg_nand.h.
+*
+* Heap is needed to allocate the tipically large buffer necessary
+* to erase and write a block.
*
* \author Stefano Fedrigo <aleph@develer.com>
+*
+* notest: avr
*/
#include "nand.h"
-
#include <cfg/log.h>
#include <struct/heap.h>
#include <string.h> // memset
/*
- * Remap info written in the first page of each block
- * used to remap bad blocks.
+ * Remap info written in the first page of each block.
+ *
+ * This structure is used in blocks of the reserved area to store
+ * which block the block containing the structure is remapping.
+ * It's stored in all other blocks too to mark a formatted block.
+ * In this case the member mapped_blk has non meaning.
*/
struct RemapInfo
{
uint16_t mapped_blk; // Bad block the block containing this info is remapping
};
+// Where RemapInfo is stored in the spare area
#define NAND_REMAP_TAG_OFFSET (CONFIG_NAND_SPARE_SIZE - sizeof(struct RemapInfo))
+
+// Fixed tag to detect RemapInfo
#define NAND_REMAP_TAG 0x3e10c8ed
+/*
+ * Number of ECC words computed for a page.
+ *
+ * For 2048 bytes pages and 1 ECC word each 256 bytes,
+ * 24 bytes of ECC data are stored.
+ */
#define NAND_ECC_NWORDS (CONFIG_NAND_DATA_SIZE / 256)
-// NAND flash status codes
+// Total page size (user data + spare) in bytes
+#define NAND_PAGE_SIZE (CONFIG_NAND_DATA_SIZE + CONFIG_NAND_SPARE_SIZE)
+
+// Erase block size in bytes
+#define NAND_BLOCK_SIZE (CONFIG_NAND_DATA_SIZE * CONFIG_NAND_PAGES_PER_BLOCK)
+
+// Number of usable blocks, and index of first remapping block
+#define NAND_NUM_USER_BLOCKS (CONFIG_NAND_NUM_BLOCK - CONFIG_NAND_NUM_REMAP_BLOCKS)
+
+// ONFI NAND status codes
#define NAND_STATUS_READY BV(6)
#define NAND_STATUS_ERROR BV(0)
+// Get block from page
+#define PAGE(blk) ((blk) * CONFIG_NAND_PAGES_PER_BLOCK)
+
+// Page from block and page in block
+#define BLOCK(page) ((uint16_t)((page) / CONFIG_NAND_PAGES_PER_BLOCK))
+#define PAGE_IN_BLOCK(page) ((uint16_t)((page) % CONFIG_NAND_PAGES_PER_BLOCK))
+
+
/*
- * Translate flash page index plus a byte offset
+ * Translate page index plus a byte offset
* in the five address cycles format needed by NAND.
*
- * Cycles in x8 mode as the MT29F2G08AAD
+ * Cycles in x8 mode.
* CA = column addr, PA = page addr, BA = block addr
*
* Cycle I/O7 I/O6 I/O5 I/O4 I/O3 I/O2 I/O1 I/O0
*cycle0 = offset & 0xff;
*cycle1234 = (page << 8) | ((offset >> 8) & 0xf);
-
- //LOG_INFO("nand addr: %lx %lx\n", *cycle1234, *cycle0);
}
* That guarantees the page is written by us and a valid ECC is present.
*/
memcpy(&remap_info, (char *)buf + NAND_REMAP_TAG_OFFSET, sizeof(remap_info));
- if (remap_info.tag == NAND_REMAP_TAG)
- return nand_checkEcc(chip);
+ if (remap_info.tag == NAND_REMAP_TAG && !nand_checkEcc(chip))
+ {
+ chip->status |= NAND_ERR_ECC;
+ return false;
+ }
else
return true;
}
/*
- * Write data in NFC SRAM buffer to a NAND page, starting at a given offset.
+ * Write data stored in nand_dataBuffer() to a NAND page, starting at a given offset.
* Usually offset will be 0 to write data or CONFIG_NAND_DATA_SIZE to write the spare
* area.
- *
- * According to datasheet to get ECC computed by hardware is sufficient
- * to write the main area. But it seems that in that way the last ECC_PR
- * register is not generated. The workaround is to write data and dummy (ff)
- * spare data in one write, at this point the last ECC_PR is correct and
- * ECC data can be written in the spare area with a second program operation.
*/
static bool nand_writePage(Nand *chip, uint32_t page, uint16_t offset)
{
* \param page the page to be written
* \parma original_page if different from page, it's the page that's being remapped
*
- * ECC data are extracted from ECC_PRx registers and written
- * in the page's spare area.
- * For 2048 bytes pages and 1 ECC word each 256 bytes,
- * 24 bytes of ECC data are stored.
+ * Implementation note for SAM3 NFC controller:
+ * according to datasheet to get ECC computed by hardware is sufficient
+ * to write the main area. But it seems that in that way the last ECC_PR
+ * register is not generated. The workaround is to write data and dummy (ff)
+ * spare data in one write, at this point the last ECC_PR is correct and
+ * ECC data can be written in the spare area with a second program operation.
*/
static bool nand_write(Nand *chip, uint32_t page, const void *buf, size_t size)
{
/*
- * Set a block remapping: src_blk (a block in main data partition) is remappend
+ * Set a block remapping: src_blk (a block in main data partition) is remapped
* on dest_blk (block in reserved remapped blocks partition).
*/
static bool setMapping(Nand *chip, uint32_t src_blk, uint32_t dest_blk)
/*
* Initialize NAND (format). Scan NAND for factory marked bad blocks.
- * All bad blocks found are remapped to the remap partition: each
+ * All found bad blocks are remapped to the remap partition: each
* block in the remap partition used to remap bad blocks is marked.
*/
static void initBlockMap(Nand *chip)
chip->block_map[b] = getFreeRemapBlock(chip);
setMapping(chip, b, chip->block_map[b]);
remapped_anything = true;
- LOG_INFO("nand: found new bad block %d, remapped to %d\n", b, chip->block_map[b]);
+ LOG_WARN("nand: found new bad block %d, remapped to %d\n", b, chip->block_map[b]);
}
}
/*
- * If no bad blocks are found (we're lucky!) write a dummy
+ * If no bad blocks are found (we're lucky!) write anyway a dummy
* remap to mark NAND and detect we already scanned it next time.
*/
if (!remapped_anything)
ASSERT(size <= NAND_BLOCK_SIZE);
ASSERT(size % CONFIG_NAND_DATA_SIZE == 0);
- //LOG_INFO("nand_writeDirect: idx=%ld offset=%d size=%d\n", idx, offset, size);
+ LOG_INFO("nand_writeDirect: idx=%ld offset=%d size=%d\n", idx, offset, size);
nand_blockErase(NAND_CAST(kblk), idx);
ASSERT(offset < NAND_BLOCK_SIZE);
ASSERT(size <= NAND_BLOCK_SIZE);
- //LOG_INFO("nand_readDirect: idx=%ld offset=%d size=%d\n", idx, offset, size);
+ LOG_INFO("nand_readDirect: idx=%ld offset=%d size=%d\n", idx, offset, size);
while (nread < size)
{
projects / bertos.git / blobdiff